SA Build Solutions Pty Ltd

SA Build Solutions Pty Ltd SA Build Solutions Pty Ltd offering custom tubular, colorbond & aluminium fencing/gate and automation solutions. BLD327876
www.sabuildsolutions.com.au

Enclosed the rear yard section to make sure puppy dog doesn’t get out with this custom made aluminium slat gate and infi...
04/09/2026

Enclosed the rear yard section to make sure puppy dog doesn’t get out with this custom made aluminium slat gate and infill panel.

65mm slats with 9mm spacings and 50mm gate frame.

All powder coated satin black

03/09/2026

Replaced an old non working motor today with this new Centurion D5 EVO SMART system installed with keypad entry system

03/09/2026

Smooth

Finished this custom made swing gate off today to add to the double gates on the other side of frontage and good neighbo...
03/09/2026

Finished this custom made swing gate off today to add to the double gates on the other side of frontage and good neighbour fencing in between

Custom made aluminium slat gate with vertical 65mm slats and 9mm spacings

Automated with single arm Vantage 500 Centurion kit

Custom-made every step of the way with every slat cut down to size and install installed within Powder Coating aluminium...
01/09/2026

Custom-made every step of the way with every slat cut down to size and install installed within Powder Coating aluminium frame.

Sometimes the nicer finishes to take more time and cost a little bit extra, but you do pay for what you get that’s for sure!!

01/09/2026

Smooth Automation with Centurion vantage 500 Motors installed to these custom-made aluminium gates with a low voltage connection back to existing PowerPoint on house wall.

Custom made aluminium slat gate with infill panels. Gate frame made from 50mm aluminium primed and powder coated to matc...
28/08/2026

Custom made aluminium slat gate with infill panels.

Gate frame made from 50mm aluminium primed and powder coated to match the 65mm aluminium slats installed with 9mm spacings.

Gate installed with dual latch key lock and powder coated hinges.

Back to this install from a few weeks ago for Nina’s touch ups and installation of Lockwood 005 deadlock for future elec...
27/08/2026

Back to this install from a few weeks ago for Nina’s touch ups and installation of Lockwood 005 deadlock for future electric strike.

65mm blades powder coated in pro texture black Looks amazing!

Full service on these Centurion D5 motors which needed some love today. Adjusted all racking to engage with motor gear p...
26/08/2026

Full service on these Centurion D5 motors which needed some love today.

Adjusted all racking to engage with motor gear properly, cleaned motor inside and out, cleaned battery terminals and replaced the existing faulty safety beams with new Centurion genuine product.

These motor were also installed (not by us) and mounted to close to the gate which resulted in the gate rubbing past the motor and knocking the magnet sensor back and forth.

All adjusted, cleaned and tested!

Both gates back to working as they should.

Progress on this project with posts all In and boxing up today for under fence plinth and low wall concrete pour
25/08/2026

Progress on this project with posts all In and boxing up today for under fence plinth and low wall concrete pour

Address

Pooraka, SA

Telephone

+61410681777

Website

Alerts

Be the first to know and let us send you an email when SA Build Solutions Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category