Digital Building Technologies

Digital Building Technologies DBT investigates additive manufacturing strategies in architecture, which have the potential to challenge traditional paradigms of construction.

05/07/2022

Robotic Extrusions - Dual Flexibility Printing
MAS DFAB 
-
Students: Chris Norcross .norcross, Jingwen Wang , Ming-Yang Wang

Tutors: Petrus Aejmelaeus-Lindström (lead) , Victor Leung , Remy Clemente , Ko Tsuruta , Yael Ifrah (coordination) 

Videography: Chris Norcross, Jingwen Wang, Ming-Yang Wang

HiRes Concrete-3D-printed formwork for structurally optimised and thermally activated concrete slabs at the NEST HiLo.-D...
09/04/2022

HiRes Concrete
-
3D-printed formwork for structurally optimised and thermally activated concrete slabs at the NEST HiLo.
-
DBT Team: Andrei Jipa , Angela Yoo .yoo , Georgia Chousou , Prof. Dr. Benjamin Dillenburger
-
Project Partners:
• Block Research Group , ETH Zürich: Matthias Rippman, Francesco Ranaudo , Dr. Tom Van Mele, Prof. Dr. Philippe Block (structural design)
• Architecture and Building Systems , ETH Zürich: Dr. Gearóid Lydon, Prof. Dr. Arno Schlueter (integrated building systems)
• ROK Architects .zurich : Michael Knauss (unit architecture), Silvan Oesterle
-
Industry Partners and Sponsors: Empa , Bürgin Creations, Holcim (Schweiz) AG .switzerland , BASF (Schweiz) AG , Christenguss AG, Rudolf Glauser AG, Georg Ackermann Gmbh, ETH Zürich , NCCR Digital Fabrication
-
Support: Lian Stähelin , Andi Reusser, Mike Lyrenmann, Hyuk Sung Kwon
-
Photography and videography: Roman Keller, Schwarz Pictures , Angela Yoo, Lian Stähelin, Georgia Chousou, Andrei Jipa

Min-Max-Binder-jet 3D-printed reusable formwork for thin-shell, double-sided concrete surfaces, exhibited at SwissBau 20...
27/02/2022

Min-Max
-
Binder-jet 3D-printed reusable formwork for thin-shell, double-sided concrete surfaces, exhibited at SwissBau 2019.
-
Team: Mania Meibodi , Pietro Odaglia , Benjamin Dillenburger
-
Collaborator: Stahlton AG  
-
Photography: Girts Apskalns , Andrei Jipa

Min-Max-Binder-jet 3D-printed reusable formwork for thin-shell, double-sided concrete surfaces, exhibited at SwissBau 20...
19/02/2022

Min-Max
-
Binder-jet 3D-printed reusable formwork for thin-shell, double-sided concrete surfaces, exhibited at SwissBau 2019.
-
Team: Mania Meibodi , Pietro Odaglia , Benjamin Dillenburger
-
Collaborator: Stahlton AG  
-
Photography: Girts Apskalns

Min-Max-Binder-jet 3D-printed reusable formwork for thin-shell, double-sided surfaces, exhibited at SwissBau 2019.-Team:...
13/02/2022

Min-Max
-
Binder-jet 3D-printed reusable formwork for thin-shell, double-sided surfaces, exhibited at SwissBau 2019.
-
Team: Mania Meibodi , Pietro Odaglia , Benjamin Dillenburger
-
Collaborator: Stahlton AG  
-
Photography: Andrei Jipa , Girts Apskalns

FoamWork-3D printing mineral foam formwork for complex concrete elements.-Team DBT: Anna Szabo , Patrick Bedarf, Prof. ...
30/01/2022

FoamWork
-
3D printing mineral foam formwork for complex concrete elements.
-
Team DBT: Anna Szabo , Patrick Bedarf, Prof. Benjamin Dillenburger

Team FenX: Etienne Jeoffroy, Michele Zanini, Enrico Scoccimarro , Alex Heusi, Kay Sanvito, Sean Tien, Oliver Bruni

Technical Support: Tobias Hartmann, Philippe Fleischmann, Andreas Reusser, Michael Lyrenmann, Yael Ifrah , Georgia Chousou , Hang Zhang, Bharath Seshadri, Andrei Jipa  

Sponsoring: Beakert, Kinematica
-
Photography: Patrick Bedarf

HiRes Concrete-3D-printed formwork for structurally optimised and thermally activated concrete slabs at the NEST HiLo.-D...
05/12/2021

HiRes Concrete
-
3D-printed formwork for structurally optimised and thermally activated concrete slabs at the NEST HiLo.
-
DBT Team: Andrei Jipa , Angela Yoo .yoo , Georgia Chousou , Prof. Dr. Benjamin Dillenburger
-
Project Partners:
• Block Research Group , ETH Zürich: Francesco Ranaudo , Dr. Tom Van Mele, Prof. Dr. Philippe Block (structural design)
• Architecture and Building Systems , ETH Zürich: Dr. Gearóid Lydon, Prof. Dr. Arno Schlueter (integrated building systems)
• ROK Architects .zurich : Michael Knauss (unit architecture)
-
Industry Partners and Sponsors: Empa , Bürgin Creations, Holcim (Schweiz) AG .switzerland , BASF (Schweiz) AG , Christenguss AG, Rudolf Glauser AG, Georg Ackermann Gmbh, ETH Zürich , NCCR Digital Fabrication
-
Support: Lian Stähelin , Andi Reusser, Mike Lyrenmann, Hyuk Sung Kwon
-
Photography and videography: Schwarz Pictures , Angela Yoo, Lian Stähelin, Georgia Chousou, Andrei Jipa

The White Tower is a theatre and performance space for the Fundaziun Origen, set high up in the Swiss Alps. A spiral sta...
04/07/2021

The White Tower is a theatre and performance space for the Fundaziun Origen, set high up in the Swiss Alps. A spiral stairway leads visitors up through successive ornamental colonnades onto a floating, vaulted stage.
-
Client: Nova Fundaziun Origen
-
Architecture: Michael Hansmeyer, Benjamin Dillenburger
-
Core-team DBT: Ana Anton , Eleni Skevaki
-
Research collaborations: PCBM, IBK, IGP, NCCR DFab

03/07/2021

The White Tower is a theatre and performance space for the Fundaziun Origen, set high up in the Swiss Alps. A spiral stairway leads visitors up through successive ornamental colonnades onto a floating, vaulted stage.
-
Client: Nova Fundaziun Origen
-
Architecture: Michael Hansmeyer, Benjamin Dillenburger
-
Core-team DBT: Ana Anton , Eleni Skevaki
-
Research collaborations: PCBM, IBK, IGP, NCCR DFab

Adresse

Stefano-Franscini Platz 1
Zürich
8093

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Digital Building Technologies erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Verknüpfungen

Teilen

Kategorie