DD Caravan Repairs

17/02/2026

Had the great pleasure of work right by the sea, with stunning views all-round us.

10/02/2026

This toilet was leaking. But when we took a look to see where is was leaking from. The back of the toilet was all cracked. So we fitted a replacement. And while the toilet is out it only made good practice to replace the seal that sits in the back connecting the toilet to the pipe work.

10/02/2026

This toilet had a slight leak. And when we looked it was coming from the seal which sits between the toilet cistern and the toilet pan. As you can see from the pictures how distorted the old seal was.

10/02/2026

A bunker all plumbed in ready and a double socket for the washing machine and tumble dryer. Ready for the owner at the start of the new season.

09/01/2026

We were asked by the owner of this caravan if we could replace the kitchen worktops, and make a filler peice to one side of the cooker as they had the cooker replaced. The old cooker was slightly wider. So when the new cooker was fitted it left a gap down one side.

31/12/2025

Wishing a Happy New Year to you all! 🎉

25/12/2025

26/11/2025

We were asked by the owner of this caravan if we could replace a wall baord in there caravan as theirs was damaged in the twin bedroom. We replaced the wall baord and its now as good as new once more.

25/10/2025

Well folks, the kids have broken up from school so we are taking some well needed family time! We are currently away on holiday and we'll be back to work on the 5th November. Please leave a voicemail or messages via any of the social media platforms and we will get back to everyone on our return 😊

20/10/2025

We were asked to see if there was something we could with the discoloured panels and the fact that the little seat had a split in it.

We completely removed the old cubicle. And fitted a low level shower tray aqua boards and trims and screen.

30/09/2025

Enjoying working in the sunshine 🌞

25/09/2025

We joined forces with Matty Williams from R D Clark Electrical, as an owner wanted their consumer unit moving. It was positioned in a cupboard quite high up, they wanted to remove the cupboards and move the consumer unit lower down. As they had a lodge, we were able to supply a new consumer unit that we could sink it in the wall.