ExplodedView2

27/05/2022

Linitherm PAL HW-M has all the same qualities as PAL HW, but with the added benefit of factory bonded, A1 fire rated mineral wool to the underside. This extra layer also contributes further by deadening impact driven noise.

Linitherm PAL HW-M boards interlock on all four sides preventing vapour escape and deflection at all board joints. Being interlocked, external load is spread across the adjoining boards, not per individual board as with standard straight cut PIR insulation. No crushing under foot or undulation being read through the thin outer skin.

2 X 100% aluminium vapour barriers (not paper based foils), one on the cold side, one on the warm, locking out the dominant external temperature whilst locking in the desired temperature with a high performance PIR core. PAL HW-M has the addition of factory bonded A1 Fire Rated mineral wool to its underside providing extra protection against fire and sound attenuation.

Being a warm roof and facade product, Linitherm PAL HW-M can be installed directly to the substrate (timber, metal, concrete, blockwork) with no requirement for a vented void between the insulation and the structure, or the outer skin and the insulation board. (contact local building control for your project).

As both facade and roofing are non vented using Linitherm PAL HW-M, there's minimal opportunity for fire to obtain oxygen within the system. The void between a vented roof or facade and its insulation is designed like a chimney effect to draw air from the bottom of cladding, or eaves of roof, to the top of the cladding, or ridge of roof in order to prevent condensation on the underside of the outer skin. However, in case of fire, this feed of oxygen allows fire to quickly spread or leap floors. The more intense a fire becomes, the more air will be drawn into the void pushing the fire upwards in a confined and shielded space. This can create a firestorm within the void where exposed breather membrane, paper based foil covered PIR, moreso PUR and EPS along with other flammables are present. Many outer skin roof and facade materials no longer require ventilation and can be specified compact and non vented with Linitherm PAL HW-M.

Contact us for more info and u value calcs for your project

Learn more about superior Linitherm insulation materials via www.explodedview.co.uk or www.linitherm.de.

TAP to see more materials to spec via Exploded View or contact [email protected]

04/05/2022

Ultimate Warm Roof and Facade, Linitherm PAL HW timber topped Insulation. Highly suitable for Zinc, Copper, Stainless Steel, Aluminium Standing Seam and Liquid Applied Systems plus many more.

Linitherm PAL HW boards interlock on all four sides preventing vapour escape and deflection at all board joints. Being interlocked, external load is spread across the adjoining boards, not per individual board as with standard straight cut PIR insulation. No crushing under foot or undulation being read through the thin outer skin.

2 X 100% aluminium vapour barriers (not paper based foils), one on the cold side, one on the warm, locking out the dominant external temperature, whilst locking in the desired temperature with a high performance PIR core.

Being a warm roof and facade product, Linitherm PAL HW can be installed directly to the substrate (timber, metal, concrete, blockwork) with no requirement for a vented void between the insulation and the structure, or the outer skin and the insulation board. (contact local building control for your project).

As both facade and roofing are non vented using Linitherm PAL HW, there's minimal opportunity for fire to obtain oxygen within the system. The void between a vented roof or facade and its insulation is designed like a chimney effect to draw air from the bottom of cladding, or eaves of roof, to the top of the cladding, or ridge of roof in order to prevent condensation on the underside of the outer skin. However, in case of fire, this feed of oxygen allows fire to quickly spread or leap floors. The more intense a fire becomes, the more air will be drawn into the void. This can create a firestorm within the void where exposed breather membrane and paper based foil covered PIR, moreso PUR and EPS along with other flammables are present. Many outer skin roof and facade materials no longer require ventilation and can be specified compact and non vented with Linitherm PAL HW.

Contact us for more info and u value calcs for your project

Also shown in images, Linitherm PGV FLEX. Specifically for curved / barrel vault roofing. Rigid board designed to flex without cutting and faceting boards. Less labour, less mess, better overall performance and aesthetic

Learn more about superior Linitherm insulation materials via www.explodedview.co.uk or www.linitherm.de.

TAP to see more materials to spec via Exploded View or contact Andrew Denham 07802 481 484

02/04/2022

The 50% cap extension announced for domestic energy prices has placed an even bigger question mark over how the future of energy supply will affect the everyday household.

We do know the prices will not decrease and should prepare as much as possible to ensure that we are not beholden

As a result of this increase apparent in all our futures, Passive House design and home upgrades have never been such a hot topic.

A home's EPC will be a far greater deciding factor on a properties worth as much as hospitals and policing as these are now centralised rather than local. School catchment areas have also eased in many areas leaving ongoing house hold running costs a bigger consideration than ever.

Exploded View are UK Representative for STYRONIT Thermal & Acoustic Plasters. Thermal Plasters can be used internally for ceilings and walls and also externally for facades. Whether you're designing a new build of upgrading an existing building, STYRONIT Plasters are the future of wall coatings providing a positive healthy breathable coating reducing U-Values even further. Let's keep those energy bills down!

We are LEED & BREEAM Certified with a high level EPD 3. Please visit https://lnkd.in/gT6ekTpx to view full certifications and the STYRONIT catalogue

email [email protected] with any queries

We need more distributors to take stock also. Please send me your details and we will discuss

Styronit manufacture Thermal Plasters and Acoustic Plasters. Spreading natural insulation practices that have positive effects on human health and building biology. Continuity in quality, mutual trust and honesty are our principles and indispensable value

01/04/2022

The 50% cap extension announced for domestic energy prices has placed an even bigger question mark over how the future of energy supply will affect the everyday household.

We do know the prices will not decrease and should prepare as much as possible to ensure that we are not beholden

As a result of this increase apparent in all our futures, Passive House design and home upgrades have never been such a hot topic.

A home's EPC will be a far greater deciding factor on a properties worth as much as hospitals and policing as these are now centralised rather than local. School catchment areas have also eased in many areas leaving ongoing house hold running costs a bigger consideration than ever.

https://lnkd.in/dmap6Gn

Linitherms PAL HW is a unique insulation board consisting of high quality interlocking PIR/PUR with factory bonded 100% aluminium vapour barriers (not paper based foils) and a 22mm interlocking factory bonded P5 board. Unlike the majority of "similar" insulation boards available, our manufacturing and bonding processes are continuous, not an after process arrangement. Each board element cures during this continuous process ensuring optimum quality is always achieved.

Suitable for tiled roofing, liquid applied and metal roofing as well as facades, LINITHERM PAL HW is an all-round insulation that will keep buildings sealed and shielded.

Linitherm manufacture using only the highest quality materials. All PIR boards utilise high density PIR, and vapour barriers are 100% Aluminium (not paper based foils). The tongue and grooved edges throughout the PIR and, when applicable, timber surface s

01/03/2022

More rewarding publications surrounding Hill House and it's AlphaMesh facade surround. 2.3 million views in 2 weeks!

The material itself was a fraction of the £4m total build cost mentioned in the video.

A lot of work went into protecting this building all thanks ultimately to the National Trust and their supporters.

It was a pleasure for Exploded View Ltd as agent for AlphaMesh to work on this technically and throughout supply alongside Carmody Groarke Architects, Price and Myers Engineers, Miller Fabrications for the Steelwork and Robertson Construction as Main Contractors.

We are so pleased with the result!

Contact Exploded View 07802 481 484 for more info. email [email protected] or visit www.explodedview.co.uk




https://youtu.be/9XSzwbFCFtc

The Hill House, in Helensburgh, Scotland was decades ahead of its time... but that means it's also experimental. And damp. ■ More about the Hill House and ho...

25/02/2022

Thermally Insulating Acoustic Plasters are becoming ever more popular due to their healthy contribution to construction, demonstrated flexibility as an all round surface material and A1 Fire Rating. STYRONIT uses very low energy processes and has a low energy requirement throughout manufacture making it one of the most efficient materials for internal walls, floors & ceilings to complete external facades. STYRONIT not only insulates, it also assists with sound attenuation both internally and externally. More than this it allows internal and external surfaces to breath making internal spaces and the building fabric as a whole functioning piece far more healthy.

STYRONIT provides high scores to specifiers green building projects as one of the highest certificated materials of its kind available. STYRONIT are LEED and BREEAM certificated as well as ISO 9001: 2015, ISO 14001: 2015, and ISO 45001: 2018 and CE certificated.

STYRONIT has a TYPE III EPD (Environmental Product Declaration) certification which is an independently verified and registered document that communicates transparent and comparable information about the life-cycle environmental impact of products in a credible way.

We also manufacture material specifically for historic and protected buildings and recently supplied the complete exterior for the project shown below

No brackets, no rails, no through fixings. Solid, insulated, fire safe construction. Mottled, patterned or completely flat finishes are all possible

Contact Andrew Denham 07802 481 484 or email [email protected] for more information

TAP and follow to see more

28/12/2021

AlphaMesh and Wood-Skin materials in partnership with Exploded View Ltd, official UK Representative.

Interiors, facades, POS and more.

Contact us with any queries, quote and samples

See more examples or visit our website www.explodedview.co.uk

https://lnkd.in/d2A7eHzG



https://youtu.be/wQtXRI-_HRI

Exploded View - WOOD-SKIN - AlphaMesh

18/11/2021

Linitherm materials are PURE LIFE Certified.
Linitherm PAL HW with 22mm factory bonded P5 surface for perfect finish standing seam warm / non vented roof and facade.

PHW with 10mm factory bonded top for perfect finish liquid applied and single ply. Tight bond with no deflection or vapour drive at board joints.

Both HW boards have a P5 exterior grade topper and PIR/PUR insulation boards are tongue and groove cut, interlocking on all four sides preventing air escape / vapour drive at board joints. These areas are where condensation can occur causing underside corrosion for metal roofing, and air escape/vapour can cause surface bubbling for liquid applied, perfect for large expanses where a totally flat uniform surface is required.

2x100% aluminium sheet vapour barrier above and below PIR/PUR (not paper based foil). Perfect for Passive House designs

Once fixed, our interlocking Linitherm HW boards behave as one united platform, completely flat whilst spreading load across the whole surface rather than each individual board.

Linitherm PGV FLEX for perfect finish barrel vault standing seam roofing. Rigid PIR/PUR is notched allowing it to curve without facetted edges reading through the thin standing seam covering. Many life boat piers around the UK coastline utilize PGV FLEX for their new and refurbed barrel vault roofs.

Linitherm Gradient is set at 2 degrees pitch keeping it cost effective and on low lead time compared to competitors.

All Linitherm products are manufactured using the highest quality materials with the plant running on renewable energy from its own roof. We also recycle any waste from production into Linirec, another of our unique specialist materials. Nothing goes to waste, Our entire head office is also passive standard using Linitherm insulation materials and external brise soleil to maximise or minimise solar intake

These qualities combined make Linitherm a top tier energy efficient manufacturer which ultimately contributes to its value as a desirable material for project specification

For brochures and tech info go to https://lnkd.in/dmap6Gn .



email enquiries to [email protected]

Other unique materials can be seen via www.linitherm.de



https://youtu.be/k6jKYhzo4dg

Linitherm Video

23/10/2021

Linitherm materials are PURE LIFE Certified 1) Linitherm PAL HW with 22mm factory bonded P5 surface for perfect finish standing seam warm / non vented roof and facade.

2) PHW with 10mm factory bonded top for perfect finish liquid applied and single ply.

Both HW P5 exterior grade topper and PUR insulation boards are tongue and groove cut, interlocking on all four sides preventing air escape / vapour drive at board joints. These areas are where condensation can occur causing underside corrosion for metal roofing, and air escape/vapour can cause surface bubbling for liquid applied.

2x100% aluminium sheet vapour barrier above and below PUR (not paper based foil). Perfect for Passive House designs and large expanses where a perfectly flat uniform surface is required.

Once fixed, our interlocking Linitherm HW boards behave as one united platform, completely flat whilst spreading load across the whole surface rather than each individual board.

3) Linitherm PGV FLEX for perfect finish barrel vault standing seam roofing. Rigid PUR is notched allowing it to curve without facetted edges reading through the thin standing seam covering. Many life boat piers around the UK coastline utilize PGV FLEX for their new and refurbed barrel vault roofs.

All Linitherm products are manufactured using the highest quality materials with the plant running on renewable energy from its own roof. We also recycle any waste from production into Linirec, another of our unique specialist materials. Nothing goes to waste, Our entire head office is also passive standard using Linitherm insulation materials and external brise soleil to maximise or minimise solar intake

These qualities combined make Linitherm a top tier energy efficient manufacturer which ultimately contributes to its value as a desirable material for project specification

For brochures and tech info go to www.explodedview.co.uk .



email enquiries to [email protected]

Other unique materials can be seen via www.linitherm.de

23/10/2021

Wood-Skin material exhibited by Eskisse Concepts for Architect@Work Paris.

Wood-Skin are always breaking new ground with colour and material combinations for interiors, facades, retail displays and POS.

Which material finish does your project require? Our panels can use recycled materials, wood, laminates, printed surfaces and metals. Surface definition without compromise

Exploded View are Wood-Skins local UK Agent for UK and International projects stemming from UK practices. Contact us for samples, quotes and queries

www.explodedview.co.uk

.