Workplace safety

Workplace safety Welcome to workplace safety🚧
Yeh channel construction site par kaam karne wale workers, supervisors aur engineers aur other people ke liye banaya gaya hai.

Yahan par aapko construction safety PPEs, work at height.safety rules,electrical safety safety,etc

Common Installation MethodsPlate Earthing: A solid copper or GI plate (usually 60cm x 60cm) is buried vertically deep in...
27/05/2026

Common Installation Methods

Plate Earthing: A solid copper or GI plate (usually 60cm x 60cm) is buried vertically deep in the ground, surrounded by layers of charcoal and salt to improve soil conductivity.
Pipe Earthing: One of the most popular and effective methods. A galvanized iron (GI) or steel pipe is driven vertically into the ground to safely discharge fault currents.
Rod Earthing: A copper or GI rod is driven directly deep into the earth. It requires minimal space and is ideal for areas with sandy or loose topsoil.
Chemical Earthing: Uses specialized conductive chemical compounds to fill the electrode pit, ensuring a low-resistance earth connection even in areas with poor soil

What is SWL?Safe Working Load (SWL) is the maximum load that lifting equipment (crane, sling, hook, or lifting gear) can...
06/05/2026

What is SWL?

Safe Working Load (SWL) is the maximum load that lifting equipment (crane, sling, hook, or lifting gear) can safely handle under specific conditions.
! Why SWL is Important:
• Prevents overloading and equipment failure
• Ensures safe lifting operations
• Protects workers and assets
• Reduces risk of accidents and injuries

X Where SWL is Applied:

• Cranes and hoists
• Slings and shackles
• Hooks and lifting beams
• Forklifts and lifting tools

Key Safety Practices:

• Always check SWL marking/tag before use
• Never exceed the specified load limit
• Consider load angle and configuration (sling angle effect)
• Inspect lifting gear before operation
• Use certified and tested equipment only
• Ensure trained operators and riggers

• Factors Affecting SWL:

• Wear and tear of equipment
• Environmental conditions (wind, temperature)
• Load distribution and balance
• Lifting angle and method

Unsafe Practices to Avoid:

• Guessing load weight
• Using damaged or uncertified equipment
• Ignoring load charts
• Poor rigging and improper slinging

How to use 5W to identify incident ?
03/05/2026

How to use 5W to identify incident ?

🚨 Top 5 Unsafe Behaviors at Worksites That Lead to AccidentsEven the best safety systems can fail when unsafe behaviors ...
02/05/2026

🚨 Top 5 Unsafe Behaviors at Worksites That Lead to Accidents

Even the best safety systems can fail when unsafe behaviors become “normal.”

Here are 5 common unsafe behaviors seen at workplaces:

1️⃣ Ignoring PPE for “just 2 minutes”
2️⃣ Using mobile phones during operations
3️⃣ Taking shortcuts to save time
4️⃣ Not reporting near misses
5️⃣ Working under stress or fatigue

Most accidents don’t happen suddenly — they build through small unsafe actions repeated every day.

✅ Safety is not only a department.
✅ Safety is a daily habit.
✅ One safe decision can save a life.

Construction Site Safety – Before vs AfterSafety is not just a requirement—it’s a transformation.The difference between ...
02/05/2026

Construction Site Safety – Before vs After
Safety is not just a requirement—it’s a transformation.
The difference between an unsafe and a safe worksite is clear:
Proper planning, implementation of safety measures, and strong supervision can prevent accidents and save lives.
From missing edge protection and poor housekeeping
➡️ To guarded edges, safety nets, proper access, and clear signage

While using a ladder, always maintain proper safety practices to prevent accidents. Keep a 3-point contact at all times ...
29/04/2026

While using a ladder, always maintain proper safety practices to prevent accidents. Keep a 3-point contact at all times (two hands and one foot, or two feet and one hand) to ensure stability while climbing. The ladder should be placed at a proper 75° angle and securely fixed at both the top and bottom to avoid slipping or movement. Always position the ladder on a firm, level, and non-slippery surface, and make sure it extends at least 3 feet above the landing point for safe access. Avoid carrying tools in your hands while climbing; instead, use a tool belt or basket, and never overreach—keep your body centered between the side rails for better balance and control.

👉Elimination (Most effective) Completely remove the hazard. Example: Stop using a dangerous chemical altogether.👉S...
29/04/2026

👉Elimination (Most effective)
Completely remove the hazard.
Example: Stop using a dangerous chemical altogether.
👉Substitution
Replace the hazard with something safer.
Example: Use a less toxic chemical instead of a harmful one.
👉Engineering Controls
Isolate people from the hazard using design or equipment.
Example: Install machine guards or ventilation systems.
👉Administrative Controls
Change how people work.
Example: Safety training, warning signs, rotating shifts.PTW etc
👉Personal Protective Equipment (PPE) (Least effective)
Protect the worker with gear.

Understanding mobile crane components
26/04/2026

Understanding mobile crane components

Excavation work carries high collapse risks, so choosing the right protective system is critical👉Shoring - Supports tren...
26/04/2026

Excavation work carries high collapse risks, so choosing the right protective system is critical

👉Shoring - Supports trench walls using hydraulic or mechanical frames to prevent collapse.
👉Benching - Cutting the trench sides into horizontal steps to reduce soil pressure.
👉Sloping - Angling the trench walls away from the excavation based on soil type.
Spoil Soil Rule:
Keep all excavated soil, materials, and equipment at least 1 meter (3 ft) away from the trench edge to avoid overloading and collapse.
Safe access/egress
Frequent inspections
Barricades & signage
Keep heavy machinery clear of edges

How to calculate scaffolding capacity☺️?
26/04/2026

How to calculate scaffolding capacity☺️?

Address

Mumbai
40086

Website

Alerts

Be the first to know and let us send you an email when Workplace safety posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category