IV Engineering Limited

IV Engineering Limited IV Engineering Limited is an experienced and talented team on housing and roads building.

The company’s services include innovative ideas, engineering design, procurement, construction and maintenance in the construction industry.

We DesignWe BuildIV Engineering Limited
13/04/2025

We Design
We Build

IV Engineering Limited

"Setting Out a Building Using the 3:4:5 Method: A Guide for ProfessionalsThe 3:4:5 method of setting out a building is a...
27/08/2024

"Setting Out a Building Using the 3:4:5 Method: A Guide for Professionals

The 3:4:5 method of setting out a building is a technique mainly used by professionals, while the square method is more commonly known by artisans and some professionals. In this article, I will discuss two key aspects: setting out and client management.

Setting Out:

To set out a building using the 3:4:5 method, you will need:

1. Skilled labor for assistance
2. A rope
3. Two steel tapes
4. Pegs
5. Profile
6. Hammer
7. Nails
8. Marker
9. Square

Follow these steps:

1. Establish your baseline according to the architectural design dimensions.
2. Place a rope on the baseline between Peg A and Peg B.
3. Measure 3 meters or feet (choose one unit and stick to it throughout) along the baseline and mark a new peg.
4. Place one steel tape on the 3-meter/feet mark and the second tape on Peg A.
5. Hold the 4-meter/feet mark on the tape attached to Peg A and the 5-meter/feet mark on the other tape attached to Peg C (the 3-meter/feet mark).
6. Ensure the 5-meter/feet mark is diagonal and the 4-meter mark is adjacent.
7. Repeat this process for all three angles.
8. At the fourth angle corner (the "check" point), use your square to ensure it's square. If it is, you're good to proceed.

Client Management:

Please note that rushing your engineer or builder to complete the setting out process can lead to mistakes, which can result in building coll@pse. Allow them to concentrate and take their time to ensure accuracy. Avoid pressuring them to finish quickly, as this may compromise the quality of work."

I hope this helps?

Edge breaking in road pavement, also known as edge cracking or edge raveling, occurs due to several factors:1. Insuffici...
12/08/2024

Edge breaking in road pavement, also known as edge cracking or edge raveling, occurs due to several factors:

1. Insufficient Shoulder Support: If the road shoulders are not properly constructed or maintained, the edges of the pavement are unsupported and more prone to breaking under traffic loads.

2. Erosion: Water runoff can erode the soil supporting the pavement edge, leading to a loss of support and subsequent breaking.

3. Traffic Load: Vehicles, particularly heavy trucks, traveling close to the edge of the pavement exert significant stress on the unsupported edge, causing it to crack and break.

4. Poor Drainage: Inadequate drainage allows water to accumulate at the pavement edges, weakening the subgrade and base layers, leading to edge failure.

5. Narrow Roads: Roads that are too narrow force vehicles to drive close to the edge, increasing the stress and likelihood of edge breaking.

6. Vegetation: Roots from nearby plants and trees can grow underneath the pavement, disrupting the support and causing cracks and breaks at the edges.

7. Freeze-Thaw Cycles: Similar to other pavement issues, freeze-thaw cycles can cause expansion and contraction at the edges, leading to cracks and breaking.

8. Aging and Wear: Over time, the materials at the pavement edge can degrade and lose their structural integrity, making them more susceptible to breaking.

Regular maintenance, proper shoulder construction, adequate drainage, and managing vegetation near the roadway can help prevent edge breaking in road pavements.

The foundation depth of skyscrapers is a critical aspect of their structural design, as it determines the stability and ...
20/06/2024

The foundation depth of skyscrapers is a critical aspect of their structural design, as it determines the stability and safety of the building. The depth of the foundation for a skyscraper depends on various factors, including the height of the building, the type of soil and bedrock below the site, local building codes, and environmental conditions.

For tall buildings, especially skyscrapers, deeper foundations are usually required to ensure the structure can distribute the weight of the building safely to the ground. There are different types of foundations used for skyscrapers, including shallow foundations like spread footings or mat foundations, as well as deep foundations like piles or caissons.

In some cases, skyscrapers are built on sites with challenging soil conditions, such as soft clay or loose sand, which may necessitate even deeper foundations to reach more stable soil or bedrock layers. Engineers and architects work together to conduct thorough geotechnical investigations to determine the optimal foundation design for the specific site conditions.

The foundation depth of a skyscraper is a crucial consideration during the planning and construction phases to ensure the building's long-term stability and safety. Deep foundations are designed to transfer the loads from the building to the ground in a way that prevents settlement or excessive movement, thereby ensuring the structural integrity of the skyscraper.

Shout out to my newest followers! Excited to have you onboard! Osabuohien Endurance Airuoyuwa, Rosemary Cliffords, Lukma...
29/05/2024

Shout out to my newest followers! Excited to have you onboard! Osabuohien Endurance Airuoyuwa, Rosemary Cliffords, Lukman Kadiri, Kingdom Udoh, Jacobson Agughara, Peace Akpan, Confidence Stephen

25/05/2024

TO BE A GREAT CEO

1. You must show Competence. Competence is if they give you work you get it done within the time & cost. Not just getting it done, get it done in time & within the expected expense because if you miss those you can do a job but you are less efficient. If you achieve a goal at a higher cost you've achieved a goal but you are less efficient but if you achieve a goal at a lower cost that you have budgeted you are more efficient.

2. You must have character - As you grow in business in a company, you'll get to a position of TRUST, where you get to know company secret, formula etc. The company can't put you in a position if they dont trust you.

NLNG seeks to engage suitably qualified candidates for employment into the following position on Fixed Term Contract bas...
09/05/2024

NLNG seeks to engage suitably qualified candidates for employment into the following position on Fixed Term Contract basis:

SHIFT NURSE (CMO/2024)

The Job: To conduct health prevention and screening activities of patients in the Residential Area Clinic to ensure proper monitoring of health conditions and maintain maximum hospital hygiene.

The position is domiciled in the NLNG Production Plant, Bonny, Rivers State.

To be eligible to apply for the Shift Nurse position, the right candidate must have: Registered nurse (RN) and Registered midwife (RM) qualifications
Or
Registered nurse (RN) qualification and any other registered specialties such as but not limited to the following:

a) Intensive Care Unit (ICU)
b) Accident and Emergency
c) Trauma Nurse
d) Burns
e) Psychiatry

In addition, candidate should have a minimum of 5 years post-qualification working experience. The candidate should be skilled at Medical Emergency Services and Clinical Patient Care and, be able to demonstrate proficiency in Information Technology. Further details on the requirements for the jobs listed above can be found on our Careers Page.

All interested candidates should log on to www.nigerialng.com,
- Click on "Careers",
- Click on "Register with Us" to register,
- Click on "Login to Job Portal",
- Click on the position to access the details and apply, and
- Attach /upload copies of relevant certificates along with application - on the Job Portal.

Application deadline is 15th May 2024.

Retaining walls are structures that are built to hold back soil or other materials and prevent them from sliding or erod...
29/02/2024

Retaining walls are structures that are built to hold back soil or other materials and prevent them from sliding or eroding. There are many reasons why retaining walls may be necessary, such as:
- To prevent a slope from collapsing.
- To create level ground for a building or other structure.
- To create a raised garden bed or other landscape feature.
- To divert water away from a structure or area.
- To support a driveway or other paved surface.
- To create a barrier between two different types of soil.


Inem Vick

17/11/2023

A wise man is not cowed by knowledge instead he uses it to guide it

I take much pride to introduce to you one of the pioneers in the construction industry, IV Construction Limited. Our com...
15/11/2023

I take much pride to introduce to you one of the pioneers in the construction industry, IV Construction Limited. Our company has been in the business of construction for years now and still going well.

Our company has already built many modern and top of the art buildings here in Nigeria. The company’s services include innovative ideas, engineering design, procurement, construction and maintenance in the construction industry.

It is our goal to modernize the construction industry. Thus we use modern technologies, and design is one of our concerns. All of our services are safe because we are licensed.

It would be an honour for us if you will allow us to work with you in some future ventures. For this, I am going to give you a ring one of these days for us to be able to make a formal offer of our services that you might be needing.

Best Regards,
IV ENGINEERING LIMITED

Address

Port Harcourt

Opening Hours

Monday 08:00 - 17:00
Saturday 09:00 - 16:00

Website

Alerts

Be the first to know and let us send you an email when IV Engineering Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share