Structural Engineers

Structural Engineers Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Structural Engineers, Structural Engineer, Kathmandu.
(1)

🚨Nobody told me in college that IS 456 and ACI 318 were basically saying the same thing in two different accents. 😅Both ...
15/08/2026

🚨Nobody told me in college that IS 456 and ACI 318 were basically saying the same thing in two different accents. 😅

Both give you a safe RC beam.
But the logic behind each formula is completely different.

I broke it down in 7 slides:
✅ Effective depth
✅ Flexural design
✅ Min & max steel
✅ Shear design
✅ Bar spacing
✅ Final verdict

Swipe, save, and thank yourself later. 👉

Working with ACI code in ETABS? DM or comment "ETABS"

💡From theory to reality: explore how a simply supported beam deflects under load with the Mola Structural Kit. Engineeri...
02/08/2026

💡From theory to reality: explore how a simply supported beam deflects under load with the Mola Structural Kit. Engineering made tangible.
Mola Structural Model

🟠A pinned connection prevents translation but allows rotation, enabling the beam to develop its natural deflected shape ...
30/07/2026

🟠A pinned connection prevents translation but allows rotation, enabling the beam to develop its natural deflected shape under loading.

Understanding this concept is essential for beam analysis, connection detailing, and structural design.

💡 Did you know? For a simply supported beam with a central point load, the maximum rotation occurs at the supports, while the slope at midspan is zero due to symmetry.🟠
Structural Engineering | 80k+ Community

When the load is heavy, you need Erling Braut Haaland level strength 😎🔥...Tag Erling Haaland in the comment
21/07/2026

When the load is heavy, you need Erling Braut Haaland level strength 😎🔥...
Tag Erling Haaland in the comment

🔩A single M20 bolt in shear can carry nearly 90 kN, but the governing capacity depends heavily on threads, shear planes,...
18/07/2026

🔩A single M20 bolt in shear can carry nearly 90 kN, but the governing capacity depends heavily on threads, shear planes, and design code provisions.

In this carousel, you can see the comparison between bolt shear strength using AISC 360 & IS 800 and interestingly, both codes produce almost identical results.

Visit Structural Engineering | 80k+ Community for more 💡⚽

Every failure leaves a lesson. Every lesson builds a safer future. 🏗️...Structural Engineering | 80k+ Community
15/07/2026

Every failure leaves a lesson. Every lesson builds a safer future. 🏗️...
Structural Engineering | 80k+ Community

🟠 In seismic design, a building does not fail only due to a lack of strength; very often, it fails due to uncontrolled t...
13/07/2026

🟠 In seismic design, a building does not fail only due to a lack of strength; very often, it fails due to uncontrolled torsion.

🔹 Centre of Mass (CM) is where the seismic inertia forces act.
🔹 Centre of Stiffness (CS) is where the lateral resistance of the structure concentrates.

When CM ≠ CS ➝ eccentricity (e) is introduced ➝ torsional moment develops.

This torsion amplifies:
• Column forces
• Storey drifts
• Edge member demands
• Local damage in earthquakes

Note:
👉 Even in perfectly symmetric buildings, torsion must still be considered.
Structural Engineering | 70k+ Community

🟠Fixed ends aren't free strength. They're a K-factor you have to earn. 🔩Swipe through a full AISC 360 buckling check on ...
11/07/2026

🟠Fixed ends aren't free strength. They're a K-factor you have to earn. 🔩
Swipe through a full AISC 360 buckling check on a W12×65 column, fixed at both ends. Same section, pinned instead of fixed, and you lose 16% of your capacity. That's the power of end restraint.
📐 K = 0.65, not 0.5. Real connections aren't perfectly rigid, and AISC accounts for it.🟠...
visit Structural Engineering | 70k+ Community for more 💡

🔩Steel connections are only as strong as their bolts. Here we see two formulas and factors which help us to calculate th...
06/07/2026

🔩Steel connections are only as strong as their bolts. Here we see two formulas and factors which help us to calculate the shear strength of the bolt.🟠...
visit Structural Engineering | 70k+ Community for more 💡

05/07/2026

Ever wonder how engineers decide if a building is safe after a massive earthquake? 🏗️🏠

Following the 2026 Venezuela doublet, experts are using a "traffic light" system to grade structural safety and help families know when it’s safe to go home. 🚦
🟢 Green: Structurally stable and safe for occupancy.
🟡 Yellow: Moderate damage; needs repairs before anyone can move back in.
🔴 Red: Critical damage or total loss.
It's not just about what’s still standing; engineers look closely at the beams and columns to identify hidden risks....
visit Structural Engineering | 70k+ Community for more 💡

Address

Kathmandu
44600

Website

,

Alerts

Be the first to know and let us send you an email when Structural Engineers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category