Underground Machine Works

03/18/2026

Homemade rust removal solution works like magic! And it’s super cheap to make compared to commercial versions.

Comment recipe and I’ll send the instructions how to make it.

03/18/2026

Home made evaporust solution is like magic!!! And it costs pennies on the dollar compared to the commercial versions.

Comment recipe and I’ll send you over the all the instructions to make the solution.

03/11/2026

Removed a shed for someone that just sold their house and the new owners didn’t want it.

03/06/2026

1973 T50B forklift has right under 8,000 hours. The main engine harness went up in smoke from a rub through at one of the isolator’s. I had to remake the whole harness.Went a little heavier than original. And added some appropriately sized circuit breaker so it won’t melt down again if anything happens. .

02/27/2026

Building some miter wrap floating shelves for

02/24/2026

02/15/2026

Re leveling the 13x40.
I get it roughed in with construction levels and then use a cast iron precision machinist level across the ways at the headstock and tailstock to ensure the bed is not twisted at all. Next I’ll use a dial indicator to center the tailstock. And finally I’ll turn a shaft between centers and take measurements to make sure there is no taper in the shaft. It’s time consuming but it makes it so you can trust your machine and make better quality parts.

08/13/2025

Getting this overgrown lot ready for seed. They were fighting with brush and stumps for years. All taken care of. Client is super happy!

05/10/2025