Nextgen Mining Maintenance

02/02/2025

Need to try this one out 🔥🔥

20/01/2025

Bucket cylinder snapped eye👁️

On site repairs to a bucket cylinder see photos below on how we did it 🔥🔥✅✅

20/01/2025

Small underground loader boom has had more blokes touch it inappropriately causing the boom to be all Methed up… soo now we being with NDT crack inspections highlighting a lot more defects then what it appeared to be. After gouging out some of the “repairs” it was very clear be have lack of fusion and slag inclusions throughout all old repairs. I then removed two sections of the boom to repair any defects from inside and out that could cause any issue in the future. Cut out two new plates to suit the side window and bottom of the boom will full pe*******on welds, correct wire and pre heats had the boom back in action in 2 shifts. Giving the boom a lovely CAT yellow paint job to complete the job had people scratching heads😂😂✅✅.. not it will last longer being Yellow..

20/01/2025

Toyota Land Cruiser front sway bar mount completely rusted away, causing the front diff to let go and smash into the engine sump.

Removed the whole mounting system of this Ute and off the spare parts Ute that will never run. Both bars and mounts had a good mount on each side so I had to make 1 good one out of the two bars. Both had very bad rust damage that I cleaned and pad welded up back to normal. The Ute was about to be a complete ride off until I said I will and can fix it.

Clients very happy they didn’t need to replace a Ute and the Ute has been at work for over a months time with no issue ✅

19/01/2025

140M Graders x2 blade skin replacements.

In and out in the shift each Grader, including removal of G.E.T replace wear skin and reinstall the G.E.T 🔥🔥

19/01/2025

Been busy over the last few months will update the page with jobs that have been in the completed recently so let’s start of with a daily inspection on a M14 ✅

M14 Grader cracked a frame 🔥

26/10/2024

26/10/2024

Summers starting to kick in for the Pilbara, Ensure you have your beers after work to stay well hydrated 🍻

16/09/2024

12/08/2024

The old trailer set up is getting a blood workout at the new site and it bloody loves it 🔥🔥 6x heel block, 3x strips, adaptors plates and chocky blocks on weld on gums in the shift and the welding set up had me sweating trying to keep up with it. Bloody beer o’clock 🍺🍺

20/07/2024

NEXTGEN’S Plow Bolt Clamp in action, Video sent in from one of our happy client’s doing some maintenance repairs on a loader bucket. The client is super impressed with the tooling preventing hand injuries, awkward body positioning/ under a load and allowing the maintenance crew to have two hand’s on the impact rattle gun. Our G.E.T tool speaks for itself so get in contact with our team to see how you can get your hand’s on the latest safety equipment. [email protected] for any injuries.

17/07/2024

Scroll backwards through the photos to see how we overhauled this 1250 bucket for one our valued clients 🔥🔥
•New Cast Lip✅
•New Side Cutters✅
•New Heel Bands & Heel Blocks ✅
•New Floor✅
•New Sidewalls ✅
•New Wear Package✅
•New Lifting Lug ✅
•All Weld On Locking Retainers ✅
•Plug Welds Flush/Proud ✅