Fraser Coast Concrete Sawing

29/04/2026

Shopping centre night works. Nearly finished 5m x 3m opening cut thru core filled block wall to extend a shop tenancy. A lot of work goes into setting up a new shop at night, the public only see temporary wall and a new store magically appear.

18/03/2026

Something we do from time to time.
Concrete grind to remove surface (this time it was exposed concrete our client was struggling to get clean) and sealed with coloured sealer and non slip incorporated between coats.

11/03/2026

Did you know we don’t just cut concrete, we also do Tile lifts and Bedding removals then grind concrete floors to remove glues ready for new floor coverings.

04/03/2026

And just like that the concrete crane base is gone. Due to our network of contractors if we don’t have the machinery ourselves we can arrange subcontractors to complete the works. Big thanks to Horne’s Haulage for assisting on this job.

27/02/2026

The crane is down, now to cut thru the steel reinforcing in the 100ton concrete base, ready for the rock breaker.

13/02/2026

Saturday morning wet weather job, just a small job to start the day while we wait to see what the weather does.

13/02/2026

12/02/2026

Tricky little job today, cutting around the top of stormwater pit so top can be lowered.

06/02/2026

500mm diameter core holes thru 250mm thick concrete slabs in preparation for concrete piles to be instillation

04/02/2026

Interesting job last week, drilling inverted core holes in stormwater pipe for core sampling. Core hole locations were 100m from either end of pipes.