ElectroTechnics Test and Tag

01/03/2023

Although there is no visual damage, this lead (straight from the factory!!) is a FAIL!

Besides a thorough visual inspection of all leads and appliances, we also test everything with a PAT-tester.

For a lead, we test
- the earth continuity, which resistance must be under 1 ohm,
- the insulation resistance, and
- the polarity.

In this case, the IEC lead failed on the polarity test as the Neutral and Active wires are crossed. This could 'lead' (pun intended) to a very dangerous situation: even when the appliance is turned off, the parts inside are still live.

If you have any questions about testing and tagging, please don't hesitate to contact us! Visit our website at https://electrotechnics.com.au

19/10/2022

We are hiring!
Driven and motivated Test & Tag Technician required for our growing company!
See the link for all details:
https://www.electrotechnics.com.au/careers
Please share 🙂

ElectroTechnics is a registered test and tag company. We use the latest PAT testers to give you detailed reports with minimal device downtime in your workplace.

08/05/2022

Are you working on a ? Make sure your tools are undamaged, safe and at least every 3 months tested and tagged. Testing and tagging is compulsory on and sites. For more information, visit our website https://electrotechnics.com.au or give us a call on 02 4063 1452

02/05/2022

Poorly maintained tools and appliances can cause injuries and creates a dangerous work environment!

Inspecting and testing your equipment on a regular basis is an important step in maintaining safety.

ElectroTechnics has the expertise and knowledge to keep your business, school or workplace safe!

For a free quote
visit https://electrotechnics.com.au
or call 02 4063 1452

11/04/2022

ElectroTechnics Test and Tag have all the right adapters and tools to test and tag your 3-phase equipment. Examples of 3ph machinery are lathes, dust extractors, sanders, ... but also, and very common, 3phase forklift battery chargers.

The ElectroTechnics Test and Tag crew comes onsite and makes sure your tools and equipment are safe and you are compliant.

Contact us via our website https://electrotechnics.com.au or give us a call on 02 4063 1452

23/03/2022

What is PAT testing?

PAT testing stands for Portable Appliance testing. There is no definition of what a ‘Portable Appliance’ is in the current legislation, however, the standard interpretation is “any appliance that has a plug attached to it and plugs into a wall outlet”.

Because of this, the word ‘portable’ is a bit misleading. There are actually a few categories of appliances that should be considered for PAT testing or, at least, visual inspections:
– Fixed appliances (E.g. airconditioning units)
– Stationary appliances and IT (E.g. printers, computers, sewing machines, ...)
– Cables and chargers (E.g. extension leads, power boards, power adapters, ...)
– Tools and appliances (E.g. tools: drill, angle grinder, kitchen appliances: blender, toaster ...)

Some industries have compulsory testing and tagging, such as construction and demolition, workshops and fabrication, ... and others don't have to... BUT the current legislation states that businesses must maintain electrical equipment in a safe condition. Because electrical testing and tagging is one of the most effective ways to do this, particularly for high risk or large, complex environments, it has become a standard way of meeting this legal obligation.

If you want to learn more about testing and tagging, visit our website https://electrotechnics.com.au

17/03/2022

Testing and tagging is an important part of any company's health and safety policy. Health and safety regulations require that electrical appliances are safe and maintained to prevent harm to workers and clients.

Book your safety now: https://electrotechnics.com.au

09/03/2022

Having your workshop and office tested and tagged is the easiest way to ensure that all your electrical equipment is safe.

It is your responsibility as a PCBU (person conducting a business or undertaking) to make sure all your tools, leads and appliances are safe and compliant. If not, you could be putting yourself, your employees, your customers and ultimately your business at risk.

Why choose ElectroTechnics Test & Tag for your testing requirements?

- Competitive pricing: We are one of the most cost-effective test-and-tag companies in the Illawarra and Sydney area,
- We are flexible in our appointments: We can provide after hour service to guarantee a minimum downtime of the workshop.
- We go above and beyond the minimal requirements: You are not only receiving a list with PASS or FAIL, but we provide a full detailed report with all the measurement results. Even more, a PDF with description, photos and outcome are produced separately when there is a fail or we do an onsite repair.
- We provide the same exceptional service, no matter the size of your business: We have experience of supplying PAT testing to multi-site companies, through to the smallest sole traders
- We offer a free reminder service: Don’t worry about forgetting to get your electrical equipment tested as we provide a courtesy reminder service
- We provide expert advice, any time you need it: We keep all of our customers up to date with the latest industry developments, so you are fully informed at all times

For more information, visit our website https://electrotechnics.com.au

07/03/2022

What is PAT testing?

PAT testing stands for Portable Appliance testing. There is no definition of what a ‘Portable Appliance’ is in the current legislation, however, the standard interpretation is “any appliance that has a plug attached to it and plugs into a wall outlet”.

Because of this, the word ‘portable’ is a bit misleading. There are actually a few categories of appliances that should be considered for PAT testing or, at least, visual inspections:
– Fixed appliances (E.g. airconditioning units)
– Stationary appliances and IT (E.g. printers, computers, sewing machines, ...)
– Cables and chargers (E.g. extension leads, power boards, power adapters, ...)
– Tools and appliances (E.g. tools: drill, angle grinder, kitchen appliances: blender, toaster ...)

Some industries have compulsory testing and tagging, such as construction and demolition, workshops and fabrication, ... and others don't have to... BUT the current legislation states that businesses must maintain electrical equipment in a safe condition. Because electrical testing and tagging is one of the most effective ways to do this, particularly for high risk or large, complex environments, it has become a standard way of meeting this legal obligation.

If you want to learn more about testing and tagging, visit our website https://electrotechnics.com.au

06/03/2022

Sometimes you come across these dangerous 'constructions'. Putting metal screws through a power board? Really?

What's the most absurd electrical fail you came across? Share yours in the comments if you dare :D

Visit our website https://electrotechnics.com.au for more information about testing and tagging.

04/03/2022

At ElectroTechnics Test and Tag, we believe that our electrical testing and inspection services are the best way of identifying existing faults so they can be fixed before becoming a hazard. Regular testing of your electrical tools and appliances is essential for a safe business.

We have a wealth of experience in PAT testing in Sydney, Wollongong and have been carrying out this service for years. Our experienced staff are fully trained and will always put safety first. That’s why we’ve built a reputation in the area for being an excellent electrical test and tag services provider and keeping your business, school or workplace safe!

For a free quote
visit https://electrotechnics.com.au

28/02/2022

Autumn! This means we start to use green tags on construction and demolition sites.

If you have any questions about your obligations and compliance, please don't hesitate to contact us! We are here to help!

For more information, pricing and contact, visit our website https://electrotechnics.com.au

Peace of mind is everything!