Pure Plumbing & Heating

Home
Canada
Mississauga, ON
Pure Plumbing & Heating

Your local licensed Plumbing & Heating Contractors. Specializing in repair, renovation, custom housing, and more! we does it all.

Servicing both commercial and residential, Pures experience and versatility is second to none!

05/30/2026

Shoutout to for helping us lift this duplex sewage ejector into the basement! 💪

Big renovation underway for and we’re excited to be part of the project.

04/25/2026

A new and improved sump pump drainage system 💧

Our clients in Port Credit were experiencing ongoing issues with their existing sump discharge. We proposed and installed a more effective solution using a properly designed French drain system.

Our team handled the entire project from start to finish, including:
• Excavation
• Coring
• Plumbing
• Backfill
• Sod repair
• Interlock installation

A clean, efficient system designed to manage water the right way and help protect the property long-term.

04/13/2026

Our team was hired to complete the plumbing and HVAC 🔧🌬️ for a 6,500 sq ft custom home in Vaughan.

One of the most challenging — and rewarding — parts of this project was designing the second-floor mechanical room. With a space of roughly 4 ft wide by 5 ft deep, we had to fit a significant amount of equipment into a very tight area 📏

This required precise planning of both the equipment layout and sheet metal design 🧰📐 The roof truss configuration added another layer of complexity, making the ductwork routing especially challenging 🌪️

But seeing it all come together exactly as planned made it worth it 🙌 This one is definitely for the books 📘

04/10/2026

Laundry sink leak in Mississauga.
Out with the old, in with the new — good as new again. 💧🔧

04/06/2026

Family Day weekend call 🚨
Failed sewage ejector in Oakville.

✔️ Pump replaced
✔️ Discharge piping simplified
✔️ Cover plate cleaned up

Back up and running — the right way.

03/25/2026

We recently completed a renovation on a luxury home in Oakville. During the rough-in stage, we were required to install drainage for both a new kitchen sink and an existing one.

To accommodate the new sink, we had to get creative with how we routed the drainage due to limitations and accessibility of the existing drain lines.

Kitchen island sinks typically only require a 1 1/2” drain line, however we almost always upsize to 2”. Waste flows more efficiently, and if the line ever needs to be snaked, it’s significantly easier to work with a 2” drain compared to a 1 1/2”.

Given the length of the new 2” drain run before tying into the existing 3” line, we installed multiple cleanout locations to allow for easier servicing of both the new and existing sinks in the future.

These cleanouts wouldn’t be easily visible to a technician, so we came up with an idea:

What if we captured photos of the exposed drainage at rough-in, then laminated them and placed them inside the vanity for future reference?

This way, any technician servicing the system can quickly understand the drain layout and locate the cleanouts, making their job much easier.

One of the biggest challenges with clearing stubborn drains is not knowing the layout. When you can see how the system runs, everything becomes more efficient.

Would you want this level of detail in your home?

03/11/2026

Another Oakville custom home in the books! 🏡

Our team completed the entire plumbing scope of work on this project — from the underground rough-in all the way through to the final fixture installations. It’s always rewarding to see a project come together after months of planning and coordination with the builder and trades.

Our favourite part of this home? Honestly… all of it 😄 But if we had to pick, the showers turned out beautiful. The tiler did an incredible job, and the accent lighting on the short niches really makes the space stand out. The clean lines, lighting, and finishes all came together perfectly.

Great teamwork by everyone involved in bringing this custom home to life.

03/09/2026

Customer accidentally clipped their hose bib with a car tire in the garage, causing damage to the existing valve.

We replaced the damaged hose bib with a new frost-free hose bib to help prevent freezing during the winter months. While completing the repair, we also discovered the seasonal shut-off valve inside the house had been installed incorrectly, so we replaced that as well to ensure the system operates properly.

✔ New frost-free hose bib
✔ Properly installed interior shut-off valve
✔ Ready for summer

If your hose bib is leaking, damaged, or not shutting off properly, feel free to reach out.

📞 Pure Plumbing & Heating Inc. @ 416 998 5243

03/07/2026

⚠️ Kitec Removal Project

Kitec plumbing was commonly installed in homes between 1995–2007, but it’s now known to corrode and fail over time, which can lead to leaks and significant water damage.

In this project, we removed the existing Kitec piping and upgraded the home with a high-quality Uponor PEX system, providing a more reliable and long-term plumbing solution.

👉 Kitec in your home? Don’t wait for a leak.

We specialize in Kitec inspections and full system replacements.

📩 Send us a DM or contact Pure Plumbing & Heating to schedule an assessment.

BurlingtonPlumber

01/28/2026

We were brought in by a design firm in Oakville to handle the plumbing for a small kitchen renovation.
With a tight timeline over the Christmas break, we completed the plumbing rough-in and provided in-house drywall repairs as well.
Finished just in time for the client to kick off the new year with a brand new office kitchen!

Happy client ✅

Address

2779 Gananoque Drive
Mississauga, ON
L5N2E4

Telephone

+14169985243

Website

http://www.pureph.ca/

Alerts

Be the first to know and let us send you an email when Pure Plumbing & Heating posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pure Plumbing & Heating:

Shortcuts

Want your business to be the top-listed Contractor in Mississauga?