Kruger Construction

Kruger Construction Construction and Tools
You can also check us out on
Instagram
YouTube
TikTok

06/02/2026

Ok so I showed that magnetic stud finder with the laser last week
•
Here it is on a finished wall finding the stud for the top nail on this baseboard
•
I just got this Brand New Makita 18v 18g Brad Nailer. Just pulled it out of the box today and this is the first time using it.

If it’s anything like the 16g they just released we are in business!
•
Using the ControlTouch Nite Eye tape measure to find the next stud at 16”
ca

06/01/2026

My first time trying out the Drywall Sander with the ring light
•
First off I noticed the weight reduction with the carbon fiber shaft and brushless motor, they keep the weight off the top which makes it feel really light
•
The head swivels really smooth and has great maneuverability.
•
This one has the ring light that uses a battery, it comes with 2 batteries that plug straight into a USB C cable.
They have another version that’s the same but without the ring light
•
The trigger can be pressed and has a lock on it to keep it running
•
One of the big things was how well it seals to the drywall, I had to turn my vacuum down to 1/4 suction because this sander will stick to the wall if it’s turned up higher.
You can see at that lower of suction how it gets the drywall wall dust off the floor from when they were boarding the walls.

05/31/2026

Will 35” tires fit on a 4th Gen Tacoma with No Lift or Level?
•
After a lot of research I settled for this setup to start off my build 35x12.50 Tamarock M/T on 17” +25mm offset Mojave
•
The backs fit no problem at all.
The front I had to remove the mudflap, crash bar and I’ll have to trim about 1/2-1” off the bottom of the front bumper, sorta like a mini viper cut
•
Now once I do my 3” lift I’ll be moving up to 37” tires but I can confirm that this setup I just put on does fit with the tiniest bit of trimming
•
If you own a 3rd gen Tacoma you know how much work goes into fitting a 35” tire
•
The new turbo engine with hybrid paired with the 8 speed transmission handle these big wheels with no effort. Mileage got a bit worse but better than I thought it would be
•
This was the first project using the New MegaMod setup.
This has taken more organization to the next level

05/30/2026

Always fun watching doing his thing on the Hunter Revolution
•
I’m putting the Mojave’s on the M/T
•
Let’s see if these 35x12.50 tires will fit on the 4th Gen Tacoma at stock height

05/28/2026

I have been using magnets to find studs in finished walls for a long time now.
•
This is the magnetic stud finder with a laser
•
It also has a level on it to make sure that laser line is plumb, first thing I did was put a level on the laser line to make sure it was accurate and it is.
•
I’ve got it linked on my Amazon store in my Bio. I just started the Amazon store to help make things easier for you to find.

05/27/2026

This is a must for every impact I have
•
make these bit holders that come with the right size screw to fit onto the brand of impact you got.

•
They have a magnet in there to hold the bits in place and once on the side to hold fasteners
•
These are the 90° and 45° pack. They also have a couple other ones
•
I’m using the KRAFTFORM KOMPAKT 20 RA-R. It has the bit storage in the handle and extension but it also features a ratcheting mechanism

05/26/2026

Check out this Cultivator attachment for the Multi-Head system.
•
This is great for flowerbeds or smaller gardens.
Though you could do a big garden if you wanted to.
•
It’s 9.5” and has a carbon fiber shaft
•
Stay tuned because I’ve got some more cool attachments to show for this Multi-Head system.

05/24/2026

Part 2 of the MEGAMOD 1858
•
These are all the EVA Foam trays that come with this set
•
Everything is labeled and has its place
•
Still doesn’t guarantee the 10mm won’t get lost but it must lessen the chances right?
•
Stay tuned for Part 3 because there is a lot more to show from the set

05/23/2026

Hands down the easiest system for loading line into your line trimmer
•
This is the Powerload.

Just take your line and push it through.

Make sure it’s even on both side, put the battery on and push the button.

That’s it’s!
•
They also have Line IQ which eliminates having to pump the head on the ground to feed more line.
It automatically senses to always keep the line at the optimal length.

05/22/2026

I feel like compact bandsaws are an underrated tool, especially the compact ones
•
We had to cut back the tbar for a wall going up and this was easily the cleanest and quickest way to do it.
Plus the control you have and little mess
ca

Address

Saskatoon, SK

Website

Alerts

Be the first to know and let us send you an email when Kruger Construction posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category