Michael's Wood Design

Michael's Wood Design Woodworking

Commission work...
03/05/2022

Commission work...

Mirror frame work in progress. Think it's much easier to stick the sides together with double sided tape and cut the mit...
12/30/2021

Mirror frame work in progress. Think it's much easier to stick the sides together with double sided tape and cut the mitres in one go...

Dewalt Tablesaw users - lots of threads on if and how you can use a dado stack  on a 10" - 5/8 arbor 744 or equivalent; ...
12/16/2021

Dewalt Tablesaw users - lots of threads on if and how you can use a dado stack on a 10" - 5/8 arbor 744 or equivalent; even if like me you are not a pro like . This is what I did, but best be guided by the manual.

1. Removed the inner plate and replaced it with the outer.
2. Used a 5/8 washer (hardware store) on the outer
3. I wouldn't go beyond 3/4" though manual says max 13/16"
4. Dado used here is Freud 8"
5. Test cut. The stack guide is not 100% accurate
6. As the saw is underpowered for this sort of thing take light successive cuts.
7. I used a shop made insert.

Refer manual for safety procedures and gear.

When your shop is just about wide enough 😀
12/15/2021

When your shop is just about wide enough 😀

Lights, Suction, Camera....Action. Thanks to advise from  and help from  (first 4") and    (next 4"). Flat tool support ...
11/30/2021

Lights, Suction, Camera....Action. Thanks to advise from and help from (first 4") and (next 4"). Flat tool support and masking tape from unknown sources.

Address

Toronto, ON
M1C4H1

Alerts

Be the first to know and let us send you an email when Michael's Wood Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category