Epoxy Boss

Directions Website Contact the business

Epoxy Boss Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Epoxy Boss, Concrete contractor, 56 pennsylvania Avenue, Vaughan, ON.

Epoxy Boss specializes in concrete preparation, coating science, surface correction, grinding, leveling, repairs, and flooring solutions for residential, commercial, and industrial spaces.

10/20/2026

A durable garage floor starts in the details.

Before a new coating goes down, cracks and damaged areas need the right attention. Here, the Epoxy Boss team is using a hand grinder to prepare the crack area, remove unstable material, and create a clean profile for repair.

This work is slower than simply covering the line with a new coating—but it is how a floor is built from the substrate up.

Crack repair. Surface preparation. Then the finished system.

10/20/2026

A failed garage coating needs more than a new top layer.

For this 420 sq. ft. Vaughan garage, the old coating was not a dependable base for another finish. Before choosing the new Raven flake colour, the real question was: can the existing coating—and concrete underneath—support a new system?

It could not.

We removed the failed material, exposed the concrete, addressed the crack line and damaged areas, mechanically prepared the surface, then rebuilt the floor with a full-broadcast Slate flake system and protective polyaspartic finish.

The lesson: peeling, lifting, cracking, or uneven coatings should be assessed before they are recoated. A beautiful finish is only as reliable as the preparation beneath it.

If your garage floor is failing, take photos of the whole floor, the worst area, and any loose edges or cracks before requesting an assessment.

PolyasparticFloor EpoxyFlooring ConcretePreparation FlakeFlooring GarageRenovation

A garage worth opening the door for. 🏍️Grey flake flooring, black cabinets, and everything in its place. This garage sho...
10/19/2026

A garage worth opening the door for. 🏍️

Grey flake flooring, black cabinets, and everything in its place. This garage shows how much the floor contributes to the finished space - bringing the parking area, storage, and workspace together.

Thinking about upgrading your garage floor?

📩 Send us 3 photos of your floor, your city, and the approximate size. The Epoxy Boss team will help you understand the next steps.

10/15/2026

Installed in 2023. Visited in October 2026. In excellent condition. This Epoxy Boss garage floor is at the Bell Air project near 6th Line in Innisfil, close to the planned Orbit community.

🏡 House built: 2019
🛠️ Garage floor completed: 2023
📍 Latest client check and walkthrough: October 2026

At our recent follow-up, the floor remained in excellent condition after serving this Innisfil home through multiple winters. And winter 2026 gave the region plenty to deal with. January brought snow-squall and extreme-cold warnings, followed by hazardous winter conditions that led Innisfil to declare a Significant Weather Event on February 18.

What does that mean for a garage floor? The challenge goes beyond cold air. Vehicles bring winter indoors: melting snow, road-salt residue and gritty debris. Water can collect near the entrance and joints, while grit gets carried through the tire paths.

That is why a useful follow-up looks beyond the shine:
• How does the entrance look?
• Are the tire paths holding up?
• Are there lifting edges, peeling areas or new cracks?
• Where does meltwater collect?

A finished-floor video shows the appearance on installation day. 🔜 Before the winter, remove accumulated grit, clean salt residue using your coating manufacturer’s care instructions, and check the doorway and joints. A coated floor still deserves regular care.

Planning a garage floor coating?
Send Epoxy Boss photos of your floor and your approximate garage size to request an assessment.

10/13/2026

A new-build garage in Vaughan may look clean and ready for a floor coating - but appearance alone does not tell us whether the concrete is ready.

Smooth builder-finished concrete, curing compounds, construction dust, small shrinkage cracks, weak surface paste, and moisture conditions can all affect how a coating system bonds to the slab.

Before installing a full-flake or other garage floor system, we assess the concrete and mechanically prepare it to create the proper surface profile. This helps us identify conditions that should be addressed before the finished floor goes down.

Your garage-floor colour is the final detail. Long-term performance starts with the concrete underneath.

Moving into a new Vaughan home? Send us photos of your garage or request an assessment to discuss the right preparation and coating system for your space.

EpoxyBossCanada

Your new garage slab can look spotless, and still need preparation before coating. A clean appearance does not tell you ...
10/13/2026

Your new garage slab can look spotless, and still need preparation before coating. A clean appearance does not tell you whether the surface has the right profile, whether curing residues are present or whether the concrete meets the selected coating’s moisture requirements.

That is why Epoxy Boss starts with the slab.

We assess the concrete and how the garage will be used. We plan mechanical preparation, identify repairs or moisture measures where required and select the system around traffic, exposure, traction and the project schedule.

Swipe through the on-site crew, preparation equipment and finished flake floor. The finished surface is the result. Assessment and preparation are part of the service behind it.

For homeowners and general contractors, Epoxy Boss coordinates the garage floor scope, from assessment and planning to installation, care guidance, applicable warranty and customer support.

Ask about Signature Garage™ full-flake systems with a UV-stable topcoat and Elite Shield™ polyaspartic / polyurea options. Installation from one day is available on qualifying projects; the slab, selected system and site conditions determine the schedule. Applicable systems include a five-year limited warranty under the written terms.

Planning a new-build garage in Vaughan? DM “NEW BUILD” with your floor area, project timeline and current slab photos. Start with a preparation and system plan.

Epoxy Boss - Advanced Concrete Floor Coating Systems & Surface Protection Services.



Your garage is new. That doesn’t mean the concrete is ready for coating. A slab can look clean while still having surface residues, a weak surface layer or a finish that needs mechanical preparation. Moisture conditions also need to meet the selected system’s requirements.

At Epoxy Boss, we start by assessing the concrete, not choosing a flake colour.

We plan the preparation, identify treatments where required and recommend a system around how you’ll use your garage.

Planning a new-build garage in Vaughan?
👉 DM “NEW BUILD” with your slab photos and project timeline.

10/13/2026

Precision starts beneath the surface.

Epoxy Boss repairs concrete cracks across the Greater Toronto Area. We assess the damage, prepare repairable cracks, apply suitable repair materials, and finish the surface for its intended use.

The repair method depends on the cause, condition, and movement of the crack. Structural concerns require further evaluation.

📍 Serving the GTA
DM “REPAIR” to discuss your concrete project.

10/09/2026

From worn coating to a clean Slate flake finish. 👏 This before-and-after shows the automotive service-bay floor renewal at ProColor Collision Toronto Junction. Epoxy Boss removed the old coating and stubborn residue, diamond-ground the concrete, and installed a full-broadcast Slate flake system with detailed perimeter finishing. 444 sq ft transformed - with preparation behind every finished detail.

📍 Toronto Junction, Ontario
📩 DM “FLOOR” with photos of your space to discuss your project.

Same service bay. A completely different finish.Swipe through the preparation, installation, and finished views of this ...
10/09/2026

Same service bay. A completely different finish.

Swipe through the preparation, installation, and finished views of this 444 sq ft floor renewal at ProColor Collision Toronto Junction. The final Slate flake finish brings a consistent grey palette across the bay, with attention to the perimeter, entrance step, and existing floor openings. The transformation is visible. These progress photos show the work behind it.

📍 Toronto Junction
📩 DM “FLOOR” to discuss a renewal for your workspace.

How is a full-flake garage floor built in Innisfil? The colour is only one part of the process. At Epoxy Boss, the insta...
10/07/2026

How is a full-flake garage floor built in Innisfil? The colour is only one part of the process. At Epoxy Boss, the installation starts with the concrete:

→ Inspect the slab and existing surface.
→ Diamond grind to create the specified bonding profile.
→ Repair cracks and damaged areas where required.
→ Assess moisture concerns before finalizing the system.
→ Apply the compatible resinous receiving coat.
→ Broadcast decorative flakes to full coverage.
→ Scrape and vacuum the cured flake layer.
→ Apply the selected protective topcoat.

Every layer depends on the work beneath it. That matters in a garage exposed to snowmelt, road grit, tire traffic, and everyday use. Planning a garage floor upgrade in Innisfil? Send us photos of your floor to start the conversation.



What does “full-flake” mean when you’re choosing a garage floor?

It describes the coverage - not just the colour blend. Decorative flakes are broadcast into the wet receiving coat until the resin is completely covered and excess flakes remain on the surface. After curing, the loose material is removed, the floor is scraped and vacuumed, and a compatible clear topcoat finishes the assembly. That process creates the layered, multi-tone appearance of a full-broadcast flake floor. When comparing garage flooring quotes, ask whether the proposed system includes full flake coverage, mechanical preparation, repairs, and the specified protective topcoat.

Epoxy Boss • Garage floor coating in Innisfil, ON
EPOXYBOSS.CA



A garage floor can look clean and still need substantial preparation. Old sealer, tire residue, weak surface material, and failed coatings can interfere with the new system’s bond. Sweeping the floor does not tell you whether the concrete is ready to receive resin. Diamond grinding prepares the surface by removing unsuitable material and creating the profile required by the selected coating system. Damaged areas and contamination may require additional work. For an Innisfil garage that has seen years of salt, slush, and vehicle traffic, this is where the install

Address

56 Pennsylvania Avenue
Vaughan, ON
L4K3V9

Opening Hours

Monday 8am - 7pm
Tuesday 8am - 7pm
Wednesday 8am - 7pm
Thursday 8am - 7pm
Friday 8am - 7pm
Saturday 10am - 5:30pm
Sunday 12pm - 3pm

Website

, , ,

Alerts

Be the first to know and let us send you an email when Epoxy Boss posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Epoxy Boss:

Shortcuts

Share

Category