Amp'd up électricité

Amp'd up électricité French qualified and insured electrician

Here we were working alongside the service provider. This was to minimise the inconvenience to the client. From power of...
17/10/2025

Here we were working alongside the service provider. This was to minimise the inconvenience to the client. From power off to back on again in under 4 hours!
From an old 3 phase overhead supply to a 60A single phase underground supply. The service provider took the new supply to the property boundary, and we pulled in a new 16mm supply cable, gave them a proper earthing system and even pulled in a garage supply at the same time.

It's always a nice treat getting the big drill bits out! Especially when it's sunny outside!
16/10/2025

It's always a nice treat getting the big drill bits out! Especially when it's sunny outside!

Another happy customer 😁So we had a 7 lights to change, a 6mm feed for a new electric hob/oven, an earthing system and s...
11/10/2025

Another happy customer 😁
So we had a 7 lights to change, a 6mm feed for a new electric hob/oven, an earthing system and some board work and a nice big 5g10mm supply to pull in.
One of the boards had an existing 3 phase supply, but only a single phase being used?!?! after testing the cable and finding out that it was fine to use we changed it back to a 3 phase system. Now the client can use all of her appliances and not have the entire place trip out 💪
The other (new) board is set up and future proofed for the project ahead, and ready for the 3 phase heating and Aircon system being installed next week.

More dodgy boards and lack of compliant earths!!! Don't let this be you guys and gals. It doesn't cost a lot to get you ...
30/09/2025

More dodgy boards and lack of compliant earths!!! Don't let this be you guys and gals.
It doesn't cost a lot to get you all electrically safe.
This client will be put right next week, a new three phase board, differential protection and a compliant earthing system amongst other jobs.
Feel free to contact me directly here, or email me at [email protected]

So, today was a testing and inspection day... And they are fun days! Before undertaking major works on your electrical i...
25/09/2025

So, today was a testing and inspection day... And they are fun days!
Before undertaking major works on your electrical installation, or just for peace of mind, it's worthwhile getting a mapping and testing service. It will show whether or not your installation is safe and compliant. You'll even know where to isolate circuits in your accurately labelled board!

Today's tests showed that over 90% of the clients cable is still in great condition, and 2 out of the 5 boards are up to the current NFC 15-100 regulation standards. I even found an absolutely fabulous old installation which was definitely worthy of a photo... However, this old boy doesn't confirm to today's safety standards and has to be changed.

If you have an installation like this, don't hesitate to contact me. Better safe than sorry 💪👍

Did you know that 80% of properties in France don't have a compliant earthing system!Let me help you be one of the 20%.Y...
25/09/2025

Did you know that 80% of properties in France don't have a compliant earthing system!
Let me help you be one of the 20%.
Yesterday's installation was a 3 phase board change, and an installation of a compliant earthing system, making the clients house electrically safe.

Adresse

5 La Telardiere
Oradour-Fanais
16500

Site Web

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque Amp'd up électricité publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.

Partager