What are the opening hours?

Monday 8am - 8pm Tuesday 8am - 8pm Wednesday 8am - 8pm Thursday 8am - 8pm Friday 8am - 8pm Saturday 8am - 8pm

Damp-Out Ltd

Home
United Kingdom
Bolton
Damp-Out Ltd

Call Directions Website Contact the business

Damp proofing and remedial works

30/10/2026

Condensation season is here now, if you have problems with condensation/mould re occurring yearly we can provide the solutions to finally do something about it, from thermal imaging and temperature analysis, to years of experience in all aspects of damp,mould and condensation problems, we have you covered

Call us on the number below or email at [email protected] to arrange an initial visit

20/05/2026

A recent job we had Been contracted to do by a local council, ground floor suspended timber floor had gradually dropped, we cut a hole out to inspect the condition of the sub floor and discovered a 3.6 meter drop underneath! This was filled with water and the central beam taking the load had rotten on the end causing the floor to sag, we pumped out the water to gain access then removed the old floor and joists, installed a steel in replacement of the timber central beam, installed a sump pump in a pit with perforated drainage pipes, this pumps the water from under the floor into a drain above.

14/03/2026

A recent inspection on an old pub converted to flats for an estate agent.

The tenant has had issues with mould in the bathroom since moving in, the room was freezing even with the heating on.

Relative humidity was high and surface temperatures below dew point, creating ideal conditions for condensation and mould growth.

We inspected this with thermal imaging and a hygrometer, to confirm

The extractor was also inadequate, coming on when the light turns on, and going off when light it turned off, we have recommended this be replaced with a DMEV extraction unit and correct flow rates set.

26/11/2025

A recent job we got asked to carry out for a local council, tenant had been suffering with a few damp issues, after investigations had been carried out the source of the problem was narrowed down to under the floor in the hallway, after stripping back we encountered a tiny pinhole in the copper piping that had been in contact with the concrete, this had eroded and the pinhole in the pipe let out a small continuous stream of hot water, we stripped all the pipework back and replaced in plastic, cleared out the pipe channels and renewed the timber capping, this will be left to dry out to acceptable levels before being screeded and new floor coverings fitted

15/11/2025

A job we are just finishing up on for a local council, full skim in kitchen and bathroom, followed by fitting the kitchen and installing the bathroom suite and tiling

08/11/2025

Condensation season is here now.

Do you suffer from humid air?
Condensation on windows?
Mould growth?

A lot of jobs we go to can be avoided by correctly ventilating your home properly.

During this colder weather when we turn to drying clothes inside, whacking the heating up, boiling pans, taking hotter showers ,draught proofing doors, windows etc, all this creates the perfect environment to trap moisture in the home and create ideal conditions for mould to thrive.

I am a firm believer in ventilation, I've created a ritual in my own home,even if it's freezing outside, I throw the windows open for 10 minutes,not only does it keep the home cleaner, it brings in fresh air, and most importantly gets rid of all that stale moisture laden air.

In Germany they swear by this, it's called Stoßlüften

🌬️ Stoßlüften: The Simple Trick for Fresh, Healthy Air! 🌿

Did you know that a few minutes of proper ventilation can make a huge difference in your home’s air quality? “Stoßlüften” — or shock ventilation — is a quick, effective way to refresh indoor air, reduce humidity, and prevent mold growth.

✅ How to do it:

Open all your windows wide for 5–10 minutes (don’t just tilt them!).

Do this 2–3 times a day, especially after cooking, showering, or waking up.

In winter, it’s even more efficient — the cold air pushes out stale, humid air fast!

💡 Benefits:

Lowers CO₂ levels and improves concentration

Prevents condensation and mold

Saves energy compared to keeping windows tilted for hours

Keeps your home fresh and comfortable

06/11/2025

A recent job we got asked to inspect for a local council, the tenant had reported perished plaster and salt staining on the inside of the reveals of this window a while back, someone had then come in and hacked off the reveals, and re plastered with salt resistant plaster, fast forward to the rain coming back and the same issue has arisen again, after a brief inspection by us, we noticed the small gaps in the mortar on the outside of the window, even though these are only small, when coupled with the sheer amount of wind driven rain this building gets, water soon found it's way inside, we proposed getting the mortar repaired and once dry treating with a salt neutraliser internally before painting

01/11/2025

🏡 Awaab’s Law – What You Need to Know

From 27 October 2025, new rules will require social housing landlords to act fast on damp and mould issues to keep tenants safe.

⏱ Key Timeframes

Emergency hazards: Investigate and make safe within 24 hours

Serious hazards: Investigate within 10 working days, fix issues within 5 days of the inspection

Written report: Tenants must be updated within 3 working days

🏠 For Landlords & Tenants

Landlords must take all reports of damp or mould seriously — no more blaming “lifestyle.”

Failure to act quickly could lead to legal action.

Tenants now have stronger rights to demand safe, healthy homes.

💧 At Damp-Out Ltd, we’re here to help landlords and tenants meet these new standards — with fast inspections, effective remediation, and professional reports to keep your property safe, compliant, and mould-free.

👉 Contact us today to stay ahead of Awaab’s Law and protect your homes and tenants

27/08/2025

A job we started on yesterday, client asked us to fix issues with damp throughout the property, once the tenant had left whilst works are carried out we began stripping off wet bonding plaster to the affected areas to help dry out the walls, we installed fans and dehumidifiers and removed pipe boxings and part of the water/mould damaged kitchen, we removed the wet carpets in the affected areas too, once stripped down we discovered 3 separate leaks within the flat, Inlet pipe for the washing machine had a very small leak, the inlet for the toilet had a quick, consistent leak, and a small weep was also found on the plumbing leading up to the water meter, these 3 over time, have saturated the slab and as a consequence, the porous clinker blocks have soaked up moisture, in places right up to the ceiling, now that the leaks have been stopped and the walls stripped back they can now begin to dry out, we have also applied a liquid dpm to the floor.

Address

Bolton

Opening Hours

Monday	8am - 8pm
Tuesday	8am - 8pm
Wednesday	8am - 8pm
Thursday	8am - 8pm
Friday	8am - 8pm
Saturday	8am - 8pm

Telephone

+447903040282

Website

http://www.bjpd.co.uk/

Alerts

Be the first to know and let us send you an email when Damp-Out Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.