Infrared Heating UK

05/05/2026

Heatmiser Thermostat Setup & Max Floor Temp Guide

When installing an infrared underfloor heating system, the thermostat setup is just as important as the installation itself.

In this video, we walk through how to set up a Heatmiser thermostat and explain how to correctly set the maximum floor temperature. This is particularly important when using infrared heating film under floating floors such as laminate or engineered wood.

A properly configured thermostat ensures your system runs efficiently, safely, and within the limits of your floor covering.

If you’re planning a project and need help with system design, layout or product selection, feel free to get in touch.

In this video, we show you how to correctly set up your Heatmiser Thermostat neoStat-e V3 and configure it for your infrared heating system.We also explain h...

04/05/2026

FlexelTouch Thermostat Setup & Floor Temperature Guide

Learn how to set up the FlexelTouch thermostat and adjust minimum and maximum floor temperature for safe and efficient underfloor heating systems.

How to Set Up FlexelTouch Thermostat | Floor Temperature Settings Explained

01/05/2026

Many people assume all underfloor heating systems work the same way, but there are important differences between electric heating mats and carbon infrared heating film.

In this video, Bert explains the key differences between electric underfloor heating mats and carbon infrared heating film, including how they operate, where they should be installed, and why choosing the correct underfloor heating system is important for performance, floor protection and energy efficiency.

Heating Mat vs Carbon Heating Film | Which Underfloor Heating Is Better?

26/04/2026

Why You Don’t Need 220W/m² Underfloor Heating Carbon Film

Bert explains why 220W/m² underfloor heating carbon film can overheat floating floors and why lower wattage infrared underfloor heating systems are safer and more efficient.

https://youtu.be/BAUniocLOrU?si=YvpUJ-K_bXOr2ahJ

Why You Don’t Need 220W/m² Underfloor Heating Carbon Film

22/04/2026

We’ve just tested the new Heatvis 350W infrared heating panel (60x60) and in this video we take you through the full unboxing, setup and real heat performance test.

Infrared heating panels work differently from traditional convection heaters. Instead of mainly heating the air, they radiate heat directly to people and surfaces, helping create a comfortable and energy efficient heating environment.

In this review we cover:
• What comes in the box
• Build quality and finish
• Real heat test results
• Where this type of infrared heating panel can be used

These panels can be suitable for:
• homes
• offices
• garden rooms
• churches
• workspaces
• renovation heating projects

If you are looking for a modern electric heating system or want to learn more about infrared heating panels, feel free to contact us.

🌐 www.infraredheatinguk.co.uk



https://youtu.be/71a11scMNrc?si=u7CrRKXfjbUMsrw8

Heatvis 350W Infrared Panel 60x60 | Unboxing & Real Heat Test Review

01/04/2026

Where can carbon infrared underfloor heating film actually be used?

This is one of the most common questions we get.

Carbon infrared underfloor heating film is specifically designed for underfloor heating and works best with floating floor systems such as laminate and engineered wood. Because it’s a dry underfloor heating system, there’s no need for screed or wet trades, which makes it ideal for renovation projects.

It can also be used with carpet and vinyl, but only when installed with a 7mm MDF baseboard system above the heating film. This protects the system and ensures even heat distribution.

One important factor many people overlook is the tog value of carpet and underlay. To allow efficient heat transfer, the combined tog value should not exceed 2.5.

Carbon infrared underfloor heating film is not suitable for tiles or screed-based systems, where alternative electric underfloor heating systems are more appropriate.

If you’re planning a project and want advice on the right system, feel free to get in touch. We design and supply complete infrared heating systems tailored to your floor build-up and layout.

23/03/2026

How do you install infrared underfloor heating?

In this video, we walk through the full installation process of an infrared heating film system, including insulation boards, film layout, electrical connections, testing and final preparation before laying the floor.

This type of electric underfloor heating is a dry system, meaning there is no screed or wet work involved. It is ideal for renovation projects where build-up height is limited and where a fast installation is required.

Infrared underfloor heating works particularly well with laminate floors, engineered wood and other floating floor systems, providing an energy efficient and modern heating solution.

If you are planning a project and would like advice or a quote, feel free to get in touch or leave your questions in the comments.

In this video, we show you how to install infrared underfloor heating film step by step. This ultra thin underfloor heating system is ideal for renovation pr...

08/03/2026

In this video, Bert explains the products and services we provide and how our infrared heating systems are used in homes, commercial buildings and renovation projects.

We specialise in infrared heating. Our carbon heating film systems are designed for laminate floors, engineered wood and LVT flooring and provide an energy efficient heating solution without concrete or other wet floor construction.

Infrared Heating UK supplies a wide range of heating equipment including infrared heating panels, electric underfloor heating systems, church heating systems and patio heaters. We also offer flooring that is specifically designed to work with infrared heating film systems.

Our team can design complete heating systems for your project. We calculate the required wattage, design the heating layout and specify the correct equipment for each space. This includes heating solutions for homes, renovation projects, churches, warehouses and commercial buildings.

We can also install infrared heating panels, electric underfloor heating systems, church heating systems and warehouse heating systems.

Our heating systems can be controlled using modern thermostats and smart control equipment, allowing you to control the heating from one place or directly from your phone.

If you are planning a renovation or building project and are looking for an energy efficient heating solution, infrared heating could be the right option.

Learn more at
www.infraredheatinguk.co.uk

11/02/2026

https://youtube.com/shorts/o63gM-vi204

Carbon Infrared Underfloor Heating Film installation in a living room, showing the main steps of the process from preparation to final layout.

18/08/2025

A Toasty Transformation 🔥 Underfloor Heating Installed!