Arlebrook Wood

Arlebrook Wood Thank you for visiting my page and any support would be greatly appreciated!

Hi I'm Archie I'm 17 and this is Arlebrook Wood my woodworking business, I mainly focus on using reclaimed timber to create a second life for materials that would have gone to waste and using as much as of it as I can . I will be making items that will be for sale on my Etsy store these will range from small tea light holders and jewellery boxes to larger items such as tables and other larger furn

iture and decorations. I can do bespoke commission pieces too working with you to design create and make your ideas come to life, if you are interested in this please email or message me on messenger.

31/10/2021

How about this for a table 😍
Could be yours for £175!

Beautiful live edge walnut slab for the top and oak trapezium shaped legs. These legs are made from the same piece of oak that is split down the middle so each leg has very similar grain pattern.

Dimensions:
38cm tall (15") X 84cm long (33") X 38cm wide (15") (at the narrowest point)

If you are interested in this table or would like a bespoke commission made please give me a message or email [email protected]

It may only be the beginning of October but I know some are thinking of Christmas already!As well as creating a stock of...
05/10/2021

It may only be the beginning of October but I know some are thinking of Christmas already!

As well as creating a stock of Chopping boards, serving boards and jewellery boxes over the next couple of weeks for Christmas I will start to make any commissions if you would like anything personal for yourself or as a present.

If you would like a bespoke commission, please message me or email me so we can design and create your piece in time for Christmas! As I am quite busy at the moment and needing to get the correct stock please don't leave it till the last minute 👍

-For Sale!-Just finished up the two oak chopping boards that I flattened the other day, these boards are 4cm thick and h...
07/08/2021

-For Sale!-

Just finished up the two oak chopping boards that I flattened the other day, these boards are 4cm thick and have been filled with epoxy and sanded to 240grit and finished with a food safe finish. Two boards available dimensions are:

L 40cm x W 30cm x T 4cm £42.50
L 30cm x W 30cm x T 4cm £35
If you are interested please private message me or buy through my Etsy page, thanks for looking!

-For Sale!-This is my first coffee table completed!Made from 2 solid reclaimed oak boards, I have designed and made this...
06/08/2021

-For Sale!-

This is my first coffee table completed!
Made from 2 solid reclaimed oak boards, I have designed and made this table, with half lap and dowel joinery on the legs, the dowels going through the half laps create a very strong and good looking joint. The table top has been joined together with buscuit joints and the of the cracks and knots have been filled with clear epoxy.
The table has been sanded up to 240 grit, wet the surface to raise grain then sanded back again before being finished with pure tung oil.

If you are interested in this coffee table please private message me, and as this is my first table it will come with 2 free coasters!
£245

Dimensions ( W 43cm X H 48cm X L 70cm)
( W 17" X H 19" X L 27.5")

😁😁 Just bolted together my first coffee table!I have used threaded inserts to attach the legs and the table top, this me...
06/08/2021

😁😁 Just bolted together my first coffee table!
I have used threaded inserts to attach the legs and the table top, this means that with a 10mm socket they can be separated and the table can be moved easier for the future owner... Is this you?

The palm router has taken a bit of a beasting this morning! This morning I have made a router sled to flatten a couple o...
05/08/2021

The palm router has taken a bit of a beasting this morning! This morning I have made a router sled to flatten a couple of chopping boards that warped a few months back. The router bit references off of the sled and cuts a parallel surface on the board to the sled taking the warp out out of the boards.

04/08/2021

To finish sand I sand to 240 grit then water the surface to raise the grain before sanding again so the grain doesn't raise when finish is applied... It also give a sleek peak of what it will look like finished and makes it possible to see down into the epoxy 😍

Today I finish sanded the coffee table top and got the the dowels in the legs and joined the leg components together rea...
04/08/2021

Today I finish sanded the coffee table top and got the the dowels in the legs and joined the leg components together ready for the final sand tomorrow.

Coffee table build-Today I planned back the excess epoxy that I filled all the cracks and knots with and joined the thre...
18/07/2021

Coffee table build-

Today I planned back the excess epoxy that I filled all the cracks and knots with and joined the three boards together, I have also cut and glued the half lap joinery for the legs to make to make two squares either end, I will then connect the two ends with the stretchers before finish sanding and assembly.

The first photo is a mock up of what the final piece will look like
Dimensions 70cm x 45cm x 45cm (31" x 18" x 18")

All glued up!Cut rebates in the main carcass of the jewellery box to accept the oak shelf to create a top tray and glued...
05/07/2021

All glued up!

Cut rebates in the main carcass of the jewellery box to accept the oak shelf to create a top tray and glued that up, also glued up another panel of oak to make a drawer bottom and then cut it to size and cut and joined all the sides of the drawer together.

Just the mitred lid and compartment dividers to go before finish sanding.

Address

Gloucester

Opening Hours

Monday 4pm - 6:30pm
Tuesday 4pm - 6:30pm
Wednesday 4pm - 6:30pm
Thursday 4pm - 6:30pm
Friday 4pm - 6:30pm
Saturday 8am - 6pm
Sunday 8am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Arlebrook Wood posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Arlebrook Wood:

Shortcuts

Share

Category