Chris Watson Plumber

Chris Watson Plumber Full plumbing service. Specialising in toilet repairs. Tap fitting. Showers. Leak detection. cylinders. radiators

Grohe pneumatic flush cistern. I find the push button a vague action on a pneumatic flush I much prefer a cable connecti...
12/06/2026

Grohe pneumatic flush cistern. I find the push button a vague action on a pneumatic flush I much prefer a cable connection. This cistern was crammed in with a boiler on top zone valves beneath. I could tell it was an architects house. If you have a toilet that needs fixing give me a call 07836264583

Landlord Legionnaires Disease risk Assessment. I was asked to do a risk assessment at a property on inspection I found 2...
01/06/2026

Landlord Legionnaires Disease risk Assessment. I was asked to do a risk assessment at a property on inspection I found 2 dead legs behind boiler going into roof space of extension capped off 15mm pipes. The water does not flow through the pipes so the water can stagnate.
I have removed the dead legs and now the property passes the risk assessment.

Level 10 tap fitting. I had to take the built in dishwasher out to fit this sink tap. The fixing nut had to be cut off a...
15/05/2026

Level 10 tap fitting. I had to take the built in dishwasher out to fit this sink tap. The fixing nut had to be cut off aswell. I planned for a tricky job and it was successful. If you need a tap changed give me a call 07836264583

High end basin unit install. This very expensive unit is designed to be fitted with a first fix of pipework. I was given...
29/04/2026

High end basin unit install. This very expensive unit is designed to be fitted with a first fix of pipework. I was given the task to use existing pipework. Expensive brass chrome waste pipe fitted. Complex tap which needs to cut to fit basin. A good skill test with a good result.

Reseating £300 basin taps. This customer really wanted to keep the old traditional taps the washers were changed by a pr...
23/04/2026

Reseating £300 basin taps. This customer really wanted to keep the old traditional taps the washers were changed by a previous plumber but it didnt work. I used my quality reseating tool to cut and clean the washer surface and it worked. I put silicone grease in the tap jumper new washers and got a great result. Fixing taps doesn't always go smoothly but it is satisfying when it does. Customer is happy.

Basin tap and waste change. There is a bit of skill needed to change a basin waste. You have to move the pedestal for ac...
15/04/2026

Basin tap and waste change. There is a bit of skill needed to change a basin waste. You have to move the pedestal for access and hold the basin with your shoulder. This waste was stuck solid I had to cut it out with a muti tool. All fitted within an hour.

Exciting rimless toilet install. I love fitting toilets and this is the new toilet to go from Screwfix. It costs £110 an...
09/04/2026

Exciting rimless toilet install. I love fitting toilets and this is the new toilet to go from Screwfix. It costs £110 and is good quality for the money. The rimless design helps keep the toilet clean. The water goes round the pan then out. It looks like a good flush from only 4.5 litres of water. If you want a toilet installed give me a call 07836264583

High level toilet cistern install. I enjoyed fitting this cistern sadly the old one had small leaks in the cast iron. Am...
26/03/2026

High level toilet cistern install. I enjoyed fitting this cistern sadly the old one had small leaks in the cast iron. Amazing to see how strong the old cistern and flushing mechanism was made. If you have a old toilet that needs fixing give me a call 07836264583

Basin toilet tap change. A bit unusual to change a basin tap that is connected to the toilet fill valve. It helps save s...
24/03/2026

Basin toilet tap change. A bit unusual to change a basin tap that is connected to the toilet fill valve. It helps save space to have a basin on top of the toilet. The waste water goes into the cistern. Interesting job.

Sink unit at a children's farm. I don't do much carpentry but this was a nice job to keep my skills up. I took out the o...
06/03/2026

Sink unit at a children's farm. I don't do much carpentry but this was a nice job to keep my skills up. I took out the old unit which had a rats nest in it and fitted new. Great improvement the customer is very happy.

Address

79 Arrowsmith Drive Stonehouse
Gloucester
GL102QS

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Telephone

+447836264583

Website

Alerts

Be the first to know and let us send you an email when Chris Watson Plumber posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Chris Watson Plumber:

Shortcuts

Share

Category