R.Carr Electrical Ltd

R.Carr Electrical Ltd We are a local family run electrical company in Herne Bay, Kent. Providing a fairly priced and reliable service whilst maintaining a high level of quality.

We undertake all aspects of electrical work from replacing a broken socket to a complete rewire.

We had recently been tasked with tidying up the Wiring that passed through this larder along with installing lighting th...
01/04/2024

We had recently been tasked with tidying up the Wiring that passed through this larder along with installing lighting that we thought was best off on a contact switch.

It was safe to sat that both us and the client were impressed

!!!!SPRING OFFERS!!!! - ends May 30th 2024 (subject to free survey)POWERReplace any non- USB socket facia or light switc...
31/03/2024

!!!!SPRING OFFERS!!!! - ends May 30th 2024
(subject to free survey)

POWER

Replace any non- USB socket facia or light switch for an equivalent finish to freshen up the look - all prices are supplied and fitted

1-5 - £25 each
6-9 - £22.50 each (free upgrade of 1 of the sockets being replaced to USB)
10+ - £20.00 each (free upgrade of 2 of the sockets being replaced to USB)

LIGHTING

Upgrade a Halogen spotlight (up to 70mm) to a Fire rated, IP65 rated, dimmable fitting with switchable colours between warm and cool white.

1-3 spotlights - £40 each supplied & fitted
4-9 spotlights - £36 each supplied & fitted
10+ spotlights - £32 each supplied & fitted

These spotlights are available with a variety of different colour bezels.

Converting to LED will save you typically 75% energy on a like for like Halogen, yet LED fittings tend to have a longer life span of up to 5x along with typically being brighter

Start saving on energy usage today

A selection of photos from a house we recently completed a re-wire on.
03/10/2021

A selection of photos from a house we recently completed a re-wire on.

Energy bills are rising!!!Free advice - Read BelowWith the average kWh costing 17.2p in 2020 the typical room with a 60w...
02/10/2021

Energy bills are rising!!!

Free advice - Read Below

With the average kWh costing 17.2p in 2020 the typical room with a 60w lamp in being on for 1hr a day for 365 days a year would cost the bill payer £3.77. Now change that lamp for the equivalent light output LED lamp (typically a 10w LED lamp), this 1 hr a day for 365 days a year costs the bill payer £0.63. Thats a £3.14 saving, not much over a year I know, but now let's say that your bedroom light is on for an hour per day, the kitchen light 2 hours per day, the hall way light for 5 hours a day, the lounge light for 5 hours a day. You are now saving £40.81 per year. This is just an example the reality may be more lights are on and for longer hours. A typical LED lamp has a life span of 30,000 hours so that living room light that is on 5 hrs a day, will last approximately 16 years. The first 2 years saving will cover the cost of your lamps and every year on is now money saved

As Tesco say "every little helps"

We are a local family run electrical company in Herne Bay, Kent. We undertake all aspects of electrical work from replacing a broken socket to a complete rewire.

Providing a fairly priced and reliable service whilst maintaining a high level of quality.

Additional sockets added in to a clients summer house/home office as additional works post a full re-wire for them as pa...
02/10/2021

Additional sockets added in to a clients summer house/home office as additional works post a full re-wire for them as part of a full property renovation.

Trunking was the cheapest option as it cut down time carrying out the works but as the sockets are within shelving, it will mostly be covered. However, even with this in mind, our aim was to keep it looking as discreet as possible.

The circuit was of ring type and these additional sockets were incorporated into the ring circuit rather than just spurring off a local point. This was achieved by disconnecting one leg out of a local socket and using approved crimps to extend to the first of the new points then carrying on in the ring circuit method. This means all sockets create equal load onto the circuit rather than potentially overloading a spurred leg.

The same was carried out with 2 additional sockets beneath the desk but all wiring was contained within the plasterboard wall, this was from a recommendation i made to them regarding the amount of electrical appliances plugged into extension leads (2 further extension leads up on the desk). We placed the 2 new sockets below as again it was the neatest and quickest option as the existing sat central between 2 wall studs.

Announcement!!We have finally got round to arranging and ordering our first set of business cards. We are also looking i...
21/08/2021

Announcement!!

We have finally got round to arranging and ordering our first set of business cards.

We are also looking into expanding what we offer in the direction of smart homes so you can control the heating and lighting in individual rooms.

Independent room heating control Saves on wasting energy heating rooms you may not want heated at that time (for example a bedroom in the middle of the day. But you may want the living room or another area heated at that time). It will also allow heating control of different temperatures in different rooms.

This could expand with us further down the line with changing heating control to temperature control by means of the addition of varying cooling technology including natural ventilation of automated window opening and Air Conditioning.

Feel free to get in touch if you are interested in the above or have any other electrical queries or quotes you would like carried out

08/08/2021
Note: Please excuse the blurry image, Facebook has somehow done this when uploading.So getting company logos and designs...
08/08/2021

Note: Please excuse the blurry image, Facebook has somehow done this when uploading.

So getting company logos and designs just right is a difficult task, we are looking at one last chamge that will see us into the foreseeable future, that stands out. We have this evening approached Herne Bay Embroidery to create a one off polo top so we can see how sizes and colours are working.

New 13 way fuseboard with surge protection and 25mm tails(feed) prepped to be installed on Tuesday.Remember to test your...
01/11/2020

New 13 way fuseboard with surge protection and 25mm tails(feed) prepped to be installed on Tuesday.

Remember to test your RCD's every 3 months, it takes less than a minute and is there to protect you. If you are unsure on how to test your RCD or yours has failed your quarterly test, then give us a call/e-mail/Facebook message to arrange a free no-obligations quote.

15/08/2020

We at R.Carr Electrical Ltd hope that all our previous, current and future customers have managed to stay safe during the lock down.

As many of you may know as I can be a little chatty, we were isolating as best as we could as we were due a baby mid July. Our little lady has arrived (4weeks ago today) and mum and baby are well.

Due to this and the way the pandemic has taken shape, I would like to announce that we will be looking to start taking work on again.

As before, we are trying to stick to evenings and weekends as this is something we wanted to concentrate on by providing electrical work at a time that is more convenient for a customer without the extra cost that can be incurred by not being during "normal working hours".

We would also like to mention that if you have had work done by us. We would appreciate if you could leave us an honest review as this may help us do things differently if you have some constructive criticism or know to carry on the way we are if it's positive.

Stay safe all and we look forward to providing you with an honest and reliable service.

I felt a freshen up was required and used some spare time to re-design. We are still here to provide advice and estimate...
25/03/2020

I felt a freshen up was required and used some spare time to re-design. We are still here to provide advice and estimates/quotes for all works but will not be able to carry out non-essential jobs at the present time, we will keep you updated as and when this changes

30/11/2019

All our quotes are free of charge and are no obligation. However we do prefer to come and have a look at a job to give you a quote that is as accurate as possible. This is to prevent any unwanted additional costs mid works.

If you would like to go over or amend a quote we have supplied then feel free to get in touch. We are more than happy to discuss/amend a quote or even suggest alternative ideas and designs.

Address

Herne Bay

Telephone

+447512616349

Website

Alerts

Be the first to know and let us send you an email when R.Carr Electrical Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to R.Carr Electrical Ltd:

Share

Category