Gasking

21/06/2024

Thinking about replacing your door handle? 🤔 It’s easier than you think!

If your old handle is worn out, broken, or you just want a fresh look, fitting a new one is a straightforward DIY job. With just a few basic tools, you can do it yourself!

# # # What You’ll Need:
- Screwdriver
- Tape measure
- Chisel (if needed)
- New door handle

# # # Steps to Replace:
1. **Remove the Old Handle**:
- Take out visible screws.
- Gently pry off any decorative cover.
2. **Prepare the Door**:
- Clean the handle hole.
- Use a chisel for any old paint or gunk buildup.
3. **Install the New Handle**:
- Thread the spindle through the hole.
- Secure with set screws or a faceplate.
4. **Test It Out**:
- Ensure smooth operation with a few test swings.

🎯 Fun Fact: DIY projects like this one increased by 25% during the pandemic! Want more home improvement tips? Check out our full guide.

Got questions? Drop them in the comments below! 📲

21/06/2024

🚨 Has your Worcester boiler shown fault code 227? Let's decode it and fix the issue! 🚨

Fault code 227 means low water pressure in your boiler. This can be caused by:
- Leaks in the system
- Recent radiator bleeding
- Expansion vessel issues
- Faulty pressure relief valve

🔍 How to troubleshoot:
1. *Check the pressure gauge*: Less than 1 bar? You have low pressure.
2. *Inspect for leaks*: Look for damp spots, puddles, or drips.
3. *Assess the expansion vessel*: Look for corrosion or damage.
4. *Test the pressure relief valve*: Make sure it doesn’t leak.

💡 Fixing the issue:
- *Repressurize the system*: Open valves until pressure reaches 1.5 bar.
- *Repair leaks*: Fix or replace damaged parts.
- *Replace faulty components*: Like the expansion vessel or pressure relief valve.

📞 Sometimes, it's best to call a professional. If you're unsure or facing a complex issue, seek expert help. Safety first!

Need a trustworthy engineer? Contact us at 0800 368 9457 or visit our website. Let's get your heat back on!

🛠️

20/06/2024

🌟 "Can Power Flushing Damage Your Pipes? 🌟

Power flushing is a powerful method to clean your heating system, but it’s not without risks. Done improperly, it can damage pipes by using high water pressure or inexperienced technicians. 🚰

✔️ **What is Power Flushing?**
Power flushing uses high-pressure water and chemicals to remove sludge, rust, and debris from your heating system, ensuring it runs efficiently.

🛠️ **Potential Risks:**
1. **High Water Pressure:** Excessive pressure can cause weak pipes to burst or leak.
2. **Inexperienced Technicians:** Skilled technicians are crucial. Inexperienced ones may cause more harm than good.

🔧 **Prevention:**
Regular maintenance like bleeding radiators, adding inhibitors, and annual boiler servicing can reduce the need for power flushing.

💡 **Takeaway:**
When performed by qualified professionals, power flushing is generally safe and can extend your heating system's lifespan.

👷‍♂️ **Question:** When was the last time you had your heating system checked? Comment below!👇

25/10/2021

25/10/2021

Thanks Rosa

★★★★★ "A Great Service"

25/10/2021

Thanks Jan

★★★★★ "I would highly recomend GasKing to everyone!"

25/10/2021

Thanks for the review

★★★★★ "New boiler in Hornchurch"

25/10/2021

Thanks Will

★★★★★ "Great personal service from the…"

25/10/2021

Great review for one of our engineers Jamie. Always happy when people take the time to leave feedback.

★★★★★ "Gasking is a royal service"

25/10/2021

GasKing Offer fantastic New Boiler Deals. Amazing finance available 0% APR and No Deposit or Buy Now Pay Later. Plus free extended warranties from manufacturer approved engineers and £100s of free gifts.

Call 08003688543 or visit www.gasking.co.uk

25/10/2021

GasKing Offer fantastic New Boiler Deals. Amazing finance available 0% APR and No Deposit or Buy Now Pay Later. Plus free extended warranties from manufacturer approved engineers and £100s of free gifts.