https://www.facebook.com/720254397836032/

Hilton Electrical Group LTD

Home
United Kingdom
London
Hilton Electrical Group LTD

Directions

Hilton Electrical Group LTD is a brand new company based in South East London, established in June 2025.

19/10/2026

⚡ ELECTRICAL INSTALLATION CONDITION REPORTS (EICRs) ⚡

When was the last time your property’s electrics were inspected?

At Hilton Electrical Group Ltd, we provide professional Electrical Installation Condition Reports (EICRs) for homeowners, landlords and businesses, helping to identify electrical defects, potential hazards and areas of non-compliance.

Whether you’re a landlord requiring an electrical safety report, a homeowner looking for peace of mind, or a business needing to meet its electrical safety obligations, we’re here to help.

✅ Thorough electrical inspections & testing
✅ Clear, detailed reports
✅ Honest, professional advice
✅ Remedial works available where required
✅ Domestic & commercial properties

📍 Covering London, Kent, Essex & Surrey

📩 Get in touch today

[email protected]

07545703884

07/08/2026

Small addition, big difference 💡

“Like night & day”, literally!

Client requested additional lighting as had been reported that specific area was too dark and shadowy.

The Pepsi drinks counter was noticeably darker than the surrounding concession areas, with the illuminated signage providing very little light to the timber frontage, unlike the others with sufficient back lighting.

Rather than simply adding fixed downlights, I installed two adjustable tilt LED fittings, positioned and angled specifically to throw the available beam across the darker areas surrounding the signage.

A relatively simple installation, but one where fitting selection and positioning made the difference. Using adjustable fittings allowed the light output to be directed where it was actually needed rather than losing a large proportion of the beam directly below the fittings.

Swipe 👉 to see results

31/07/2026

𝗦𝘁𝗼𝗿𝗮𝗴𝗲 𝗛𝗲𝗮𝘁𝗲𝗿 𝗨𝗽𝗴𝗿𝗮𝗱𝗲 & 𝗖𝗶𝗿𝗰𝘂𝗶𝘁 𝗔𝗹𝘁𝗲𝗿𝗮𝘁𝗶𝗼𝗻 ⚡

This job started as a fault investigation on an existing storage heater. Through testing and diagnosis, the fault was traced to a failed heating element.

Rather than replacing the element, the client decided to move away from Economy 7 heating and upgrade to a fully electric panel heater.

Works carried out included:

🔹 Isolation and removal of the existing storage heater.
🔹 Responsible disposal of the redundant unit.
🔹 Economy 7 circuit ready for a standard 24-hour supply once the electricity tariff is changed by the provider, allowing user control locally & via online app.
🔹 Installation of a new electric panel heater.
🔹 Replacement of the damaged local isolator and heat-affected cable with the correct isolation arrangement.
🔹 Full inspection, testing and certification on completion, including continuity, insulation resistance, earth fault loop impedance and RCD testing.

Another installation completed with safety, compliance and attention to detail from fault diagnosis through to final commissioning.

31/07/2026

⚡️🔥 Sometimes the job isn’t finished just because the fault has gone.

This week we attended a fault on an immersion heater where the local isolator switch had failed. We then found the flex cable coming from the element to the switch was undersized and not heat resistant, this created thermal damage on the load terminals which resulted in melting the internal mechanism for the switch.

The damaged components were replaced and the heater was back up and running, but something about the installation still didn’t feel right for a 3kW heater.

Rather than walk away, we took the time to revisit the job, review the circuit arrangement and make further improvements to ensure the local isolation was more appropriate for the way the circuit was installed.

We changed over the 13A switched fused spur, the the correct accessory and we put in a 20A Double Pole switch.

Following the final visit:
✅ Correct isolator installed.
✅ Heat-damaged cable replaced.
✅ Full verification testing completed, including continuity, insulation resistance, Zs and RCD testing.
✅ Temperatures monitored under load, confirming the circuit is operating normally.

As electricians, it’s easy to focus on getting equipment working again. For me, it’s equally important to leave knowing the installation is safe and up to standard.

That’s the standard we aim to deliver on every job. It’s usually those quick “5 minute” jobs that uncover deeper issues.

14/07/2026

A simple upgrade that makes a big difference. ✨

We recently upgraded an outdoor garden light from a candlelight lamped fitting to a new LED fog/security wall light with built in PIR, giving the rear garden a cleaner look, improved security, and plenty of light for those summer evenings. Even during the lighter evenings, you can see how much coverage this single light gives 🌙💡

Looking to upgrade your outdoor lighting? Get in touch.

☎️ - +44 7545 703884
📧 - [email protected]

13/07/2026

📖 A first look at our brand-new bespoke Brochure & Welcome Pack.

We’ve been working behind the scenes to create a professional brochure that showcases who we are, the services we provide, and how we can support our clients with tailored electrical maintenance solutions.

Inside you’ll find an overview of our maintenance packages:

⭐️🥇 Tier 1 – Gold Signature
🥇 Tier 2 – Gold
🥈 Tier 3 – Silver
🥉 Tier 4 – Bronze

Whether you’re looking for complete planned preventative maintenance, compliance support, reactive call-outs or ongoing electrical services, we have a package to suit every property and business.

This is just a small glimpse of what’s inside, with the full brochure detailing our services, response times, package benefits and much more.

We’d love to hear your thoughts! 👀

⚡ Hilton Electrical Group LTD
Delivering safe, smart and reliable electrical solutions.

20/04/2026

✅⚡️

Some essential repairs carried out today on loading dock vehicle power stations. Around 18 damaged at this location of one of the UK’s leading supermarket chains in Aylesford, Kent.

Repairs consisted of, full changeovers, faceplates, replacement RCD’s & neons. Returning tomorrow to finish off, but a productive nonetheless to ensure a fully efficient area.

18/04/2026

Was contacted to replace a wall-mounted towel rail heater in Medway, Kent.

On arrival, although the customer had supplied a new unit, it became clear the existing installation had underlying issues. The flex had been disconnected from the Switched Fused Connection Unit, which itself had been installed outside of permitted bathroom zones following recent works.

Further inspection identified thermal damage within the FCU, along with an over-rated 13A fuse. This indicated a fault within the existing heating element, with the incorrect fuse rating allowing the fault condition to persist longer than it should have.

Due to access limitations and to avoid unnecessary disruption, the decision was made to install a Unswitched Fused Connection Unit in a compliant configuration. Fuse changed to a 3A.

We will be returning to complete the installation with a new thermostatically controlled element, providing safe operation along with user control and improved energy efficiency.

Another example of why proper inspection and testing is critical — not all issues are visible at first glance.

📍 Hilton Electrical Group LTD
Inspection | Testing | Compliance | Upgrades

18/04/2026

Tivoli step lighting at a popular Cinema 💡 🎥

Regular maintenance visits + remedial services ✅

18/04/2026

EICR Saturdays ✅

Pollards Wood 📍

Address

Mayfair London
London
W1J 7QU

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Hilton Electrical Group LTD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.