Site-Survey

16/05/2026

🔧 New Site-Survey video is live!

In this tutorial, I explain the **Close Traverse Method** and how to check control points properly before starting setting out works on site.

A wrong control point can create serious problems later: wrong grid lines, wrong foundations, wrong anchor bolts, wrong steel position — and expensive rework.

In this video, I cover:
✅ how to verify control points
✅ why closing the traverse matters
✅ how to spot mistakes before they affect the job
✅ practical site engineering checks for real construction projects

If you work in **site engineering, surveying, setting out, or construction layout**, this is a method worth understanding.

Watch the full video here 👇
https://youtu.be/tdX687moO4o

The close traverse method is one of the most important techniques used by site engineers and surveyors to check control points, verify site accuracy, and red...

09/05/2026

🚧 New article now live: Best Total Stations in 2026

Choosing the right total station is not just about brand or price. It depends on the task, required accuracy, site conditions, software workflow and long-term reliability.

In this guide, we cover:

✅ Best total stations for surveying and construction layout
✅ Manual vs robotic total stations
✅ Accuracy requirements by task
✅ Roadworks, drainage, monitoring and BIM workflows
✅ Practical advice for contractors, site engineers and surveyors

Read the full guide here:
🚧

Read the full guide here:
https://site-survey.co.uk/best-total-stations-in-2026-top-picks-by-task-accuracy/

Discover the best total stations in 2026 for surveying, construction layout, roadworks, monitoring and BIM, with accuracy guidance by task.

12/02/2026

🔵 How to Be a Good Site Engineer – The Right Way from Day One
by Site-Survey

Being a good Site Engineer is not just about setting out lines and levels. It’s about precision, responsibility, and understanding the full picture before touching the ground.

Here’s what makes the difference:

✅ 1. Start with an Initial Site Survey

When arriving on a new site, never rush into setting out.

Walk the site carefully

Understand boundaries and access

Identify existing benchmarks and control points

Check for potential obstacles or risks

A proper initial survey saves time, money, and prevents costly mistakes later.

✅ 2. Gather All Information from the Client

Before starting any work, make sure you have:

Latest approved drawings

Project specifications

Construction details

Design revisions

Tolerances and requirements

Never assume. Always verify that you are working with the latest issue drawings.

✅ 3. Verify Control Points – Use a Closed Traverse

Your setting out is only as good as your control.

Check primary control points

Run a closed traverse

Adjust and confirm accuracy

Record results properly

If the control is wrong, everything built on top of it will be wrong.

✅ 4. Accurate Setting Out

Once everything is verified:

Set out grid lines

Check offsets

Confirm levels

Mark clearly and protect your points

Take your time. Precision defines professionalism.

✅ 5. Always Check Your Work

Never leave site without:

Independent re-check

Cross-checking dimensions

Confirming coordinates

Verifying levels

Double-checking is not a weakness. It’s a professional habit.

🎯 A good Site Engineer combines technical knowledge with discipline and attention to detail.

Measure twice. Build once.