Specialist High Level Glazing

Home
United Kingdom
Newmarket
Specialist High Level Glazing

Commercial and industrial glazing experts. access anywhere, install anywhere - at height specialists. UK based - DM for more information.

27/08/2026

Specialist Access. Heavy Lifting. Precision Glazing.

Another project where careful planning and specialist equipment were essential to deliver a safe and efficient glazing replacement.

Our team was tasked with replacing an oversized defective DGU, measuring over 3 metres in length and weighing in excess of 400kg. Due to the size and weight of the unit, a conventional replacement method simply wasn’t an option.
The works required a carefully coordinated lifting operation, including:
A specialist crane, selected specifically to operate safely within the restricted space available.

A dedicated 6 in-line vacuum-powered lifting system to securely handle both the existing and replacement glazed units.

Our custom secondary safety device, providing additional support throughout the lifting and installation process.

A full contract lift, including lifting plans, flight path and radius drawings, a qualified Appointed Person, slinger/signaller and continuous communication throughout the operation.

A specialist ground-level glazing team to remove and reinstate the external pressure plates and cappings and ensure the vacuum lifting equipment was correctly positioned.

Full highways and public safety management, including a bus lane closure, pedestrian walkway closure and bus stop suspension.
Controlled removal, transportation and disposal of the defective oversized glazed unit.

Fully cordoned exclusion zones, with a dedicated ground marshal maintaining public safety throughout the works.

Projects of this scale are about far more than simply replacing a piece of glass. From the initial planning and permits through to the lifting operation and final installation, every stage requires coordination, specialist equipment and experienced personnel.

At Specialist High Level Glazing, we specialise in delivering complex glazing solutions where access, size, weight and logistics present a challenge.

29/06/2026

Our latest project saw the successful replacement of one oversized double glazed unit (DGU) at the Radisson RED Hotel, Greenwich, located on the 9th-floor façade. Due to the size of the unit, restricted access and operational constraints of a live hotel environment, the project required a carefully coordinated lifting and access strategy.

The Challenge

Replacing large façade glazing at height presents significant logistical and safety challenges. Traditional access equipment was not suitable for this location, necessitating a bespoke solution that maintained the highest safety standards while minimising disruption to the client and building occupants.
Our Solution

Following a comprehensive site survey, engineering assessment and lift planning process, our team developed a specialist installation methodology incorporating:
• Mobile crane lifting operations
• IRATA-certified rope access technicians
• Powered vacuum lifting technology
• Internal glazing specialists
• Project-specific lifting plans, RAMS and exclusion zone management

Working in complete coordination, the replacement unit was lifted by mobile crane along a predetermined flight path before being received by our rope access technicians. The glazing was then expertly manoeuvred into position while our internal installation team completed the alignment, fixing, sealing and final quality checks.

Throughout the operation, continuous communication was maintained between the appointed person, crane operator, slinger/signaller, rope access technicians and glazing operatives, ensuring every stage of the lift was completed safely, efficiently and in accordance with the approved lifting plan.

Project Outcome
✔ Successful replacement of one oversized insulated glass unit
✔ Completed safely within a single working shift
✔ Zero incidents or safety observations
✔ Minimal disruption to hotel operations and surrounding public areas
✔ Fully sealed, weatherproofed and handed back to the client on programme

Why Specialist High Level Glazing?

Complex glazing replacements demand far more than simply replacing glass. They require detailed planning, specialist access expertise and experienced personnel capable of delivering high-risk operations safely and efficiently.
Whether utilising rope access, cranes, MEWPs or bespoke lifting solutions, our team has the experience, equipment and technical capability to deliver specialist glazing projects across the UK—regardless of complexity.
If you're planning a high-level glazing replacement or façade maintenance project, we'd be pleased to discuss how our specialist team can support your requirements.
📞 Get in touch to discuss your next project.
0208 175 7009

$⚠️ How do you replace a fractured glass roof panel above a busy shopping centre without disrupting the public below?At B...$

22/06/2026

⚠️ How do you replace a fractured glass roof panel above a busy shopping centre without disrupting the public below?

At Brunel Shopping Centre, Swindon, our team recently completed the replacement of a damaged laminated glass panel within the central atrium roof.

Using a combination of IRATA rope access technicians and IPAF-operated MEWPs, we safely accessed the defective panel at height while maintaining a fully controlled exclusion zone below.

The project involved:

✅ Specialist rope access operations
✅ Removal of external cappings and pressure plates
✅ Installation of a replacement laminated glass panel
✅ Full weatherproof reinstatement
✅ Ground-level marshalling and exclusion zones
✅ Completion within a single shift

Projects like this demonstrate why rope access can often provide a safer, faster and more cost-effective alternative to traditional access methods.

A great effort from the team and another successful high-level glazing project completed safely.

08/05/2026

Recently completed a challenging oversized DGU replacement project involving the removal and replacement of a defective unit with new like-for-like glass to exactly match the existing specification, performance requirements, and appearance of the façade.

The replacement unit measured over 4m long and weighed in excess of 145kg, so detailed planning and specialist lifting equipment were essential from the outset.

To carry out the works safely within the restricted working area, we utilised a specialist spider mini-crane complete with a dedicated 6 in-line vacuum suction lifter to safely manoeuvre both the defective and replacement glass during the lifting operation. Alongside this, we also used our own secondary safety retention system throughout mobilisation and installation for additional protection and control.

Externally, access was achieved using a MEWP/scissor lift to allow safe removal and reinstatement of pressure plates and cappings, as well as accurate positioning of the power sucker during installation.

Due to the size of the defective DGU, specialist preparation was required to safely remove, transport, and dispose of the unit from site. All ground level areas below the works were fully cordoned off and controlled at all times by a dedicated ground marshal to ensure safety for the building and its tenants throughout the works.

A great example of how the right planning, equipment, and team can deliver complex glazing replacements safely and with minimal disruption on occupied buildings.

29/04/2026

Specialist High-Level Glazing Project – Central London

We recently completed a complex high-level glazing project involving the replacement of an oversized glass canopy panel at a commercial property in Central London.

The panel featured a detailed, bespoke design with no original manufacturer markings, requiring a tailored solution. Our team coordinated closely with a graphic designer to accurately reproduce the design, ensuring the replacement film matched the original aesthetic.

Using a specialist mini crane and scissor lift, our high-level glazing technicians safely installed the new panel and applied the custom film with precision. The result is a fully restored canopy, delivering both structural integrity and a high-quality visual finish.

This project highlights our capability to manage technically demanding glazing installations, combining design coordination, specialist access equipment, and expert installation.

10/04/2026

We recently delivered a specialist oversized glazing replacement at NatWest Bank, Thanet. The works involved the removal and installation of a large structural glass canopy panel above the main entrance, within a live commercial environment.

The scope required a controlled and highly coordinated approach due to restricted access, the scale of the unit, and the need to maintain safe public operation throughout the works.

A MINI crane and vacuum lifting system were utilised to facilitate precise handling and placement. Installation was carried out under strict safety controls, including work-at-height systems and exclusion zones to ensure full compliance.

The project was completed efficiently, with minimal disruption to the client’s operations. The new installation restores both the visual quality and structural performance of the entrance canopy.

This project reflects our capability in delivering complex glazing solutions where planning, safety, and ex*****on are critical.

31/03/2026

Case Study: Glazing Replacement & Ventilation Upgrade – Parliament View, Lambeth High Street

This project involved a comprehensive glazing and ventilation upgrade at Parliament View, located on Lambeth High Street in London. The works were designed to enhance façade performance, improve ventilation, and maintain the building’s architectural integrity. Due to restricted access and the scale of the glazed units, the project utilised a combination of a large mobile crane and IRATA-trained rope access technicians to ensure safe and efficient completion of works.

The works included the Removal of vents above fixed windows, boarding up of redundant vent openings for safety and weatherproofing, Installation and commissioning of new ventilation units and the Replacement of 2 large, glazed façade units using crane-assisted lifting

A hybrid approach was adopted, combining a large mobile crane for heavy lifting and IRATA-trained rope access technicians for installation and detailed works at height. This reduced the need for extensive scaffolding and minimised disruption.

The crane was used to lift and position the two large façade glazing units safely into place. Detailed lift planning and coordination ensured smooth ex*****on within restricted site conditions. IRATA-certified technicians carried out the installation and sealing of glazing units, as well as vent removal and replacement works. Their expertise allowed precise work in hard-to-reach areas while maintaining high safety standards.

This project demonstrates the effectiveness of combining modern access techniques with specialist lifting solutions. The integration of a large mobile crane and IRATA-trained technicians enabled the safe, efficient, and high-quality delivery of complex façade works in a constrained urban environment.

Address

32 Kirtling Road
Newmarket
CB89RR

Telephone

+447765877247

Website

https://shlg.co.uk/

Alerts

Be the first to know and let us send you an email when Specialist High Level Glazing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Specialist High Level Glazing:

Want your business to be the top-listed Contractor in Newmarket?