Surface Repair Solutions

11/08/2026

Damaged kitchen or bathroom surfaces?

This laminate kitchen worktop had been chipped,I used a range of materials and colour matched the worktop to blend the repair with the surrounding area.

I also repair quartz,ceramics,baths,basins and some shower trays.

Save time and money by repairing not replacing,prices from £95 I cover most of Norfolk call 07881 922217 for a quote or visit
www.surfacerepairsolutions.co.uk

26/07/2026

This bath had been repaired by another company and unfortunately rust began to re appear after a year, I removed the repair materials and rusted areas and applied a rust preventer treatment.
Next the area was filled,sanded smooth and a surface primer applied before the bath colour was matched and a high gloss paint applied specifically for baths.

If you have damaged bathroom surfaces in Norfolk get in touch for a free quote today!
Call 07881 922217 www.surfacerepairsolutions.co.uk

07/05/2026

This laminate worktop in a matt white finish had a couple of small dents to the edge,replacing the worktop would have involved a lot of hassle and expense of removing and fitting a new worktop.

Within a few hours I had repaired the damage using the latest range of fillers,pigments,paints and lacquers blending the repair into the surrounding area leaving a hardwearing surface again.

For kitchen or bathroom hard surface repairs across Norfolk why not get in touch for advice or a quote?call 07881 922217 or visit
www.surfacerepairsolutions.co.uk

04/05/2026

04/05/2026

Chipped,scratched,dented or holed kitchen or bathroom surfaces?
We can repair most damaged surfaces including:

WORKTOPS QUARTZ GRANITE CERAMICS KITCHEN DOORS BATHS BASINS SHOWER TRAYS WINDOW FRAMES UPVC

Using a range of fillers,resins and colour matching on site so the repair blends with the surrounding area.

Take a a look at www.surfacerepairsolutions.co.uk or call 07881 922217 for more information or a quote.

20/04/2026

I've just reached 100 followers! Thank you for continuing support. I could never have made it without each and every one of you. 🙏🤗🎉

19/04/2026

This worktop had a large hole,where the carpenter fitting the new worktop had set the router depth stop a bit too deep causing a blow out on the face side.Faced with having to replace the worktop he gave me a call to see if anything could be done.

After assessing the damage I filled the hole using a selection of fibre fill and fine surface filler,this was sanded smooth and flat I then colour matched the worktop and applied several light coats of paint using an airbrush to the repaired area followed by a clear lacquer to match the sheen level.

The carpenter was really pleased at how well the colour matched and also thankfull he did not have to replace the worktop after all!

Repairing kitchen and bathroom surfaces in Norwich call 07881 922217 or visit www.surfacerepairsolutions.co.uk