Custom Fitting Solutions Ltd.

12/03/2026

✨ Kitchen & Utility Room Installation

A recently completed kitchen and utility room installation, creating a clean and modern open-plan space for the customer to enjoy.

This project features a large central island along with extensive storage and worktop space, helping to make the kitchen both highly practical and visually striking within the room.

Kitchen designed and supplied by David @ Magnet Poole
Installation carried out by Custom Fitting Solutions Ltd

Magnet Poole

12/03/2026

✨ Kitchen Installation recently Completed.

Designed and supplied by Marco at Magnet Bournemouth.

This project involved extensive preparation works before the new kitchen could be installed, transforming the space into a bright and modern open-plan kitchen area.

Works carried out included:

▪ Removal of existing floor tiles
▪ Floor preparation and self-levelling
▪ Installation of glue-down LVT flooring throughout
▪ Complete electrical rewire of kitchen including new consumer unit
▪ Plumbing alterations
▪ Full plastering works
▪ Installation of the new kitchen and appliances

The end result is a clean, modern kitchen with improved lighting and layout, creating a much more functional and welcoming space for the customer.

Installation carried out by our team of specialists @ Custom Fitting Solutions Ltd

12/03/2026

✨ Kitchen & Utility Renovation – Completed Last Month

This project involved far more than simply installing a new kitchen. To improve the overall layout and flow of the space, an existing doorway was closed off and a new opening created to better connect the kitchen and utility areas.

Works carried out included:

▪ Closing off an existing doorway and forming a new opening
▪ Electrical alterations and upgrades
▪ Plumbing modifications
▪ Full plastering works throughout
▪ LVT flooring installation across both rooms
▪ Complete kitchen and utility room installation

The result is a clean, modern space with a far more practical layout, giving the customer a kitchen and utility area that works perfectly for everyday living.

Kitchen designed and supplied by Marco at Magnet Bournemouth, with full installation carried out by Custom Fitting Solutions Ltd.

📩 If you’re considering a kitchen renovation or home improvement project, feel free to get in touch at [email protected]

Custom Fitting Solutions Ltd

14/02/2026

Another en-suite completed for an existing client ✔️

Following their kitchen renovation and a previous en-suite installation last year, we’ve now completed a further upgrade within the same property.

Always appreciated when clients continue to trust us with the next phase of their home improvements.

Consistent detail. Clean finish. Built to last.

14/02/2026

🔹 Craft-Focused

Not all joinery comes out of a box.

This utility room included on-site adaptations and hand-built internals to make the space work properly — including a custom airing rack and bespoke storage.

When it needs doing right, we build it.

14/02/2026

Another kitchen completed ✔️

A full transformation bringing warmth and functionality back into the space.

Natural woodgrain doors paired with clean white worktops and a central island to improve flow, storage and everyday use.

Designed properly. Installed properly. Built to last.

If you’re considering a kitchen renovation in Dorset, feel free to get in touch.

22/08/2025

Our current job:

Few upgrades to an existing kitchen in Bournemouth. This week we are installing electric underfloor heating complete with thermal insulation. perfect timing as the cooler months are just around the corner!

Never to be seen again because next is levelling compound then it’s ready for Karndean LVT flooring.

09/07/2025

01/07/2025

Another kitchen installation completed on behalf of Kutchenhaus Bournemouth.

We stepped in at short notice to complete the project after the original installer sadly had to withdraw due to a health issue. Always happy to help where we can.

(📸 Swipe to see the full transformation.)

20/08/2023

Works completed for a friend of the family to assist with the sale of house. Surveyors report stated that damp proof course had failed which was not the case but was due to rising damp coming up through concrete hearth of old chimney and debris in cavity. Base removed from chimney and cavities cleared. Sleeper wall reinstated with new wall plates and joists. Chemical dpc used as a precautionary measure and damp proof membrane used to allow immediate dry-lining and decorating to take place and to inhibit salts passing through into decorative surface.

Whilst we were at it we decided to smarten up kitchen by removing the old then installing a recycled kitchen that we had removed from another job which was in a much better condition then existing. Rewired electrics which included finding and fixing of many faults (standard practice nowadays 🙄), plastered all walls then decorated, floor levelled then installed LVT flooring.

Pleased to say that plenty of viewings took place during works with an increased offer placed on day of us completing works. 👌🏼

22/06/2023

Did you know that we are now registered with Gas Safe and have our own in house Gas engineer.