Designed Surfaces

Designed Surfaces Solid Surface Fabricator based in Saltash England. We make products ranging from Kitchen Worktops in

16/08/2026

Just another calm, relaxing week in the workshop… said absolutely no one ever. 😂🥵

This week has mostly consisted of doing lots and lots of bits…

Fitting tops ✔️
Making vanity tops ✔️
Making up white Soild surface stair strings ready for their walnut treads ✔️
A bit of lathe work ✔️
Stopping for a VERY necessary coffee ✔️☕
Sweating approximately 14 times my own body weight ✔️🥵

Basically, if it can be made, fitted, sanded, turned or sworn at… we’ve probably done it this week. 😂

And did I mention IT’S TOO BLOODY HOT?! ☀️🔥

Productivity is currently being powered by caffeine, questionable language and the occasional standing-in-front-of-a-fan break.

Roll on a nice cool workshop… sometime around November. 🤣

05/08/2026

Seamless from workshop to installation. 🤍

This beautiful Tristone Snow Range worktop was fabricated with full-height coved splashbacks, then lifted into place in two sections with the splashbacks already attached. Once on site, the joins were seamlessly bonded together to create one continuous finish.

Finished with a Corian moulded sink, this installation is exactly why we love solid surface. No visible joins, smooth flowing lines, hygienic, practical, and built to last.

Sometimes the hardest part is getting it into the room… but the end result is always worth it! 👌

30/07/2026

THE TOP IS FITTED!! 🙌🔥

And what a day it’s been… 😂

As much as we love a nice tall coved splashback (because let’s be honest, that’s what makes a solid surface worktop look 👌), we definitely don’t love plastered walls that have other ideas!

This corner decided to curve out by 6mm at the top… SIX MILLIMETRES! 🤦‍♀️ Enough to make any fabricator question their life choices for a minute! 😂

But… we worked our magic, the HI-MACS Pavia top is in, and just as expected, it looks absolutely spot on. 😍

And of course… that recessed drainer I temporarily forgot how to make? 😅 Worth the panic, because it finishes the whole top perfectly! 💪

Another happy customer and another reminder that no wall is ever actually straight! 🤣

29/07/2026

UPDATE… THE YORKSHIREMAN IS BACK! 😂

The workshop can finally function again.

After a mid-job recap from the Yorkshireman, the recessed drainer is officially done! 💪

Turns out I hadn’t forgotten how to do it after all… I just needed someone to reboot my brain for five minutes! 🤦‍♀️🤣

Who knew the boss still needed technical support every now and then? 😅

24/07/2026

Here on my own at Designed Surfaces, achieving absolutely f**k all while I wait for the Yorkshireman to get back from holiday and give me the motivational kick up the arse I desperately need 😂

Apparently he’s taken my last remaining brain cell on holiday with him, because I’ve now forgotten how to do a recessed drainer… something I’ve done approximately 947 times before 😩🤦‍♀️

At this point I’m basically just wandering around the workshop looking busy and hoping muscle memory kicks in before Monday 😂

COME BACK, I’M UNSUPERVISED AND IT’S NOT GOING WELL! 🤣

19/07/2026

From raw Corian sheets to a beautifully crafted seamless vanity unit.

This bespoke solid surface vanity features:
✔️ Premium Corian construction
✔️ Two soft-close Blum drawers
✔️ Seamless integrated design
✔️ Built to last and made to measure

Every detail is carefully fabricated, assembled and hand-finished in our workshop to deliver a high-end finish that’s as durable as it is stylish.

What do you think of this minimalist design? 👇

13/07/2026

🥵 30°C outside…

“Let’s put the oven on!” 🤦‍♀️😂

Completely normal decision when you work with solid surface!

Today’s job was heating up an old sheet of Corian® Beach Glass to thermoform a bespoke curved floating shelf and finish off a kitchen transformation.

The best bit? This sheet had been sat in the yard waiting for a second chance. Waste not, want not! ♻️

Some people cool off with ice cream… we crank the oven up to bend worktops. 🔥😅

08/07/2026

Saving another solid surface top! ♻️🙌

So, after carefully explaining to a fellow tradesperson how to remove a Corian worktop — nice sharp blades, a clean straight cut, and keeping the gap as small as possible so we could put this beautiful grained White Onyx top back together with a discreet joint — he listened intently, took it all on board… and then did the complete opposite. 😂🤦‍♀️

I can only assume the chosen technique involved a blunt multi-tool, one eye closed and absolutely no fear. 😳😂

So, on an already hot and stressful day, off we went to sort out the situation. And, being the highly skilled professionals we are 😏, we managed to pull it back together.

To be fair… it’s worked out pretty bloody well! 👌

Another solid surface top saved from waste, ready to carry on its life in its new home. That’s one of the great things about solid surface — with the right skills, even when things don’t quite go to plan, it can be repaired, reworked and reused. ♻️

06/07/2026

Started the day feeling all productive… gym done 💪, headed to the workshop, went into the toilet to get changed ready for work… and then the door decided I wasn’t leaving. 😂🚪

Yep. Locked in the workshop toilet. What a start to the day. 🤦‍♀️

Thank f**k for all the random stuff that gets stored in there, because after a bit of rummaging around I managed to find some upholstery tools and break myself free. 😂🔧

Who needs a locksmith when you work in a workshop? 🤣

Anyway… gym done, escape room completed. Suppose I’d better actually do some work now. 😂

Address

Saltash

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+447912614950

Website

Alerts

Be the first to know and let us send you an email when Designed Surfaces posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share