What are the opening hours?

Monday 8am - 8pm Tuesday 8am - 8pm Wednesday 8am - 8pm Thursday 8am - 8pm Friday 8am - 8pm Saturday 8:30am - 12pm

REDSS

Electrical & Data Services

24/09/2026

Definitely not what we expected to find in this loft… 😳

A quick look into the loft turned into quite the surprise

Before carrying out any electrical work, it’s always worth checking the space properly. Lofts can hide all sorts of unexpected hazards, and this is a good reminder that safety comes first.

Needless to say, this one will be dealt with before any work continues!

UnexpectedFind

22/09/2026

Making room for a flush-mounted socket. 🔌🧱

For this installation, we’re chasing the wall ready for a new flush-mounted socket.

We’re using the Metabo wall chaser to create a neat, controlled channel for the wiring and back box, helping us achieve a clean finish once everything is installed and the wall is made good.

Using the right tools makes a big difference when it comes to accuracy and consistency — especially when you're chasing into walls.

A bit of dust now for a much cleaner finish later. 👌

15/09/2026

21 years old and finally getting a makeover! ✨

We’ve replaced these 21-year-old white plastic sockets and switches with new brushed satin chrome accessories.

A simple change, but what a difference it makes. 👌

The new finish gives the room a much more modern and premium look, while replacing the older accessories at the same time helps keep everything looking fresh and consistent.

From dated white plastic ➡️ modern brushed satin chrome.

Sometimes you don’t need to change the whole room — just the finishing touches. 🔌✨

27/08/2026

A simple loft lighting upgrade that makes a big difference. 💡

We’ve installed a new 5ft LED batten in this loft to provide much better coverage, making it easier to see throughout the space.

We’ve also relocated the pull cord so it’s positioned right by the loft hatch.

No more climbing into a dark loft and trying to find the light switch! 😅

Sometimes the best improvements aren’t complicated — they’re about making something more practical and easier to use.

Better coverage ✅
Easier to find the light ✅
A much more usable loft ✅

26/08/2026

Sometimes a refurbishment isn’t just about installing something new — it’s about putting right what’s already there. 🔧

As part of an ongoing refurbishment project, we’ve been working on the cabling running from the main building to a container.

Over time, additional cables had been installed and secured to the catenary wire using a mixture of plastic cable ties and even rope. As you can see in the video, some of those plastic ties had become brittle and weak over time, with the cables able to be pulled away by hand.

We removed all the redundant cabling, re-fixed and tensioned the catenary wire, and then re-secured the cables that were still required.

This time using metallic cable ties and a dedicated metal tie tensioning tool, ensuring the cables are properly secured.

The difference at the end speaks for itself. 👌

A cleaner installation, redundant cables removed and the remaining cabling properly supported.

It’s not always about what you can see at the end — it’s about doing the work properly underneath it too.

25/08/2026

A small upgrade with a big difference. 💡

We’re replacing existing spotlights with new LED fittings to improve energy efficiency and give the lighting a fresh, modern finish.

The new spotlights are slightly larger in circumference than the existing ones, so we needed to carefully enlarge the existing cut-outs.

To minimise the chance of making the holes too large, we’re using the Hole Enlarging Arbor, allowing us to use two hole saws on the same arbor. This gives us much more control when enlarging an existing hole.

And because drilling into plaster can create plenty of dust and debris, we’re also using the (Dust And Debris Elimination) system to capture the mess as we drill.

Better lighting, improved efficiency and — importantly — a cleaner installation process. 👌

SuperRod DADE ElectricalInstallation LightingUpgrade

24/08/2026

12 years without a service… and this is why alarm maintenance matters. 🚨

This Texecom Veritas alarm system is receiving its first service since it was installed 12 years ago.

Following a power cut in the local area, the alarm was unable to rely on its battery backup — highlighting an important issue that can easily go unnoticed until you actually need it.

As you can see in the second picture, the original battery has deteriorated over time, with cracks appearing in the casing. 🔋

The battery has now been replaced and the system is being fully serviced.

Regular alarm servicing is important because it allows potential issues to be identified before they become a problem, including:

🔹 Battery condition and backup performance
🔹 Signs of component deterioration
🔹 Faults that may not be immediately obvious
🔹 System operation following a power failure
🔹 Ensuring the alarm continues to provide the protection it was designed for

An alarm system can sit quietly for years — but when something happens, you need to know it’s going to work.

12 years is a long time to go without a service. Don't wait for a power cut or fault to find out your backup battery has failed.

20/08/2026

A small detail that makes a big difference. 👌

When it comes to labelling a fuse board, why settle for a marker pen when you can have a clean, professional, bespoke label?

Using a label machine means we can create labels to suit the exact equipment — including different sizes for the main switch, MCBs and RCBOs — rather than trying to make one size fit everything.

The result? A much cleaner, more professional finish that’s easier to read and looks like it belongs there.

And it’s not just fuse boards. Bespoke labelling can be used on things like server racks, control panels, distribution equipment and much more.

It’s a simple upgrade, but one that can really improve the finished installation.

19/08/2026

⚡ Another home EV charger installation completed!

We’ve installed a Simpson & Partners tethered home EV charger, providing the customer with a smart, convenient and future-ready charging solution. 🔌🚗

For this installation, we used EV Ultra SWA cable, selected to meet the environmental requirements of the installation while providing a robust and reliable connection.

A neat installation, quality equipment and a charger that looks right at home on the property. 👌

Thinking about having an EV charger installed at home? Get in touch with us to discuss your requirements.

11/03/2026

We’re proud to share that REDSS has successfully passed our latest NICEIC Approved Contractor assessment ✔️

The NICEIC assessment involves a detailed review of our installations, certification, and overall compliance with current electrical regulations.
It’s an important part of ensuring the work we deliver continues to meet the standards expected within the industry.
Maintaining our Approved Contractor status reflects our ongoing commitment to quality workmanship, safe installations, and professional standards across every project we undertake.

📧 [email protected]
📞 0121 517 0868
🌐 www.redss.uk⁠�

Address

Solihull
B91

Opening Hours

Monday	8am - 8pm
Tuesday	8am - 8pm
Wednesday	8am - 8pm
Thursday	8am - 8pm
Friday	8am - 8pm
Saturday	8:30am - 12pm

Website

http://redss.uk/

Alerts

Be the first to know and let us send you an email when REDSS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to REDSS:

Want your business to be the top-listed contractor in Solihull?