DGF Control Systems Ltd

DGF Control Systems Ltd Based in Northants but covers the UK. For more info email [email protected]

DGF Control Systems Ltd specialises in:
• Build & Design of Electrical Control Systems.
• Electrical & Mechanical Breakdowns.
• Machinery Maintenence & Servicing.

As the year draws to a close we would like to thank our customers for their support this year. The photos below show the...
30/12/2024

As the year draws to a close we would like to thank our customers for their support this year.

The photos below show the last set of panels for 2024.

Happy New Year everyone!

Runi SK120a polystyrene screw compactor installed today in Essex for PRM Waste Systems We also carried out on site train...
03/12/2024

Runi SK120a polystyrene screw compactor installed today in Essex for PRM Waste Systems

We also carried out on site training for the operators ensuring safety and working of the machine.

Busy week in the factory secondary panel for Whitworths flour mill. The second panel is for a Conveyor in Corby.
22/09/2024

Busy week in the factory secondary panel for Whitworths flour mill.

The second panel is for a Conveyor in Corby.

Here’s a peek at what’s been going on lately. The big control panel for Whitworths flour mill in Wellingborough will be ...
30/08/2024

Here’s a peek at what’s been going on lately.
The big control panel for Whitworths flour mill in Wellingborough will be heading to site next week.

33 Safety control boxes went out to a customer in Corby last week.

Some panel modifications made in Croydon.

Junction boxes made ready for modifications next week.

We’ve also made the most of the school holidays and have taught DGF jnr how to mark out and drill gland holes.

Nice new job for a local company in Wellingborough. Whitworth Flour Mill. Watch this space for progress updates.
22/07/2024

Nice new job for a local company in Wellingborough. Whitworth Flour Mill. Watch this space for progress updates.

Busy few days working with Rob  from PRM Waste Systems at an oil filter recycling plant in Newark. We discovered the fau...
19/06/2024

Busy few days working with Rob from PRM Waste Systems at an oil filter recycling plant in Newark.

We discovered the fault was the sealing ring on this shredder had come adrift. After further investigation it was found that the sealing ring had worn down and was pushing material past the rings and forcing the plates off the drum.

After an awkward few days, with only having a 10cm gap to work, we had the machine up and running in a timely manner

Lots of mechanical work over the the past few weeks. Been working with a long standing customer PRM Waste Systems pullin...
16/06/2024

Lots of mechanical work over the the past few weeks. Been working with a long standing customer PRM Waste Systems pulling apart balers and compactors to be sent off or cleaning and painting.

Servicing Bio processing machines

We have been working at Rookery South power Station in Stewartby assisting with a 50m shaker deck installing new bed plates.

After some long days last week we also went to install a new shaft in a shredder.

Busy few week unfortunately can’t show all the work we have been doing due to being under NDA. The photos below are 2 pa...
15/05/2024

Busy few week unfortunately can’t show all the work we have been doing due to being under NDA.

The photos below are 2 panels heading to Bahrain this week to be connected to some 55kw hydraulic power packs.

Big thanks to Terra projects for coming to help with these and getting them out the door.

28/04/2024
Runi SK200 twin screw polystyrene compactor.  After an early start down to Harlow to investigate an issue with this mach...
08/04/2024

Runi SK200 twin screw polystyrene compactor.

After an early start down to Harlow to investigate an issue with this machine we found that it had melted down inside the existing chambers.

Due the job being quite involved we decided to get the machine shipped back up to our workshop where could take it apart.

Like to thank Bosworth's Couriers & Haulage Ltd for there quick response on getting someone down to Harlow quickly and getting back to us.

Thanks to DGF Jr for helping me get the machine apart and back together in a quick turnaround.

The machine will be heading back to site in the morning.

Prewiring conveyors for Caterpillar plant install on Monday.Here you see a pre-built junction box that we have built in ...
20/03/2024

Prewiring conveyors for Caterpillar plant install on Monday.

Here you see a pre-built junction box that we have built in advance, to save the time spent onsite working.

Address

Walgrave

Telephone

+447905336261

Website

Alerts

Be the first to know and let us send you an email when DGF Control Systems Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DGF Control Systems Ltd:

Share

Category