Photon Energy Electrical Systems Kenya

17/06/2025

01/11/2024

https://www.aihr.com/blog/insubordination/

Struggling to manage insubordination in the workplace? Learn how to prevent and address insubordinate behavior in a swift and effective way!

13/09/2024

27/08/2024

Ongoing electrical conduitwork in kitengela , contracted to do all electricalelectricals

14/07/2024

Rresults of our work in sotik 5kva system using lithium

14/07/2024

https://www.tbbpowermobile.com/blog/low-frequency-inverter-vs-high-frequency-inverter. Difference between high and low frequency innverters

Whether you want to set up the ultimate off-grid solar power system or ensure reliable backup power at home, a key component will always be an inverter. Without one, using the energy inside our battery to power AC equipments would be impossible. They are a crucial piece of equipment for whoever want...

01/04/2024

Installation that we carried out in kamakis 5kva system

10/02/2024

Overview of our electrical work in kakamega eshisiru

08/02/2024

Connecting 2 inverters in parallel

14/08/2023

Salt and charcoal are added in earthing pits to improve the conductivity of the earth electrode.

Salt is added to the earthing pit as it is a good conductor of electricity. When salt is dissolved in water, it dissociates into ions which easily allow the flow of electrical current. This helps in reducing the resistance between the earth electrode and the surrounding soil, thus enhancing the efficiency of earthing.

Charcoal, on the other hand, is a good conductor of electricity due to its high carbon content. It has the ability to absorb moisture, which further improves the conductivity between the earth electrode and the ground. Charcoal also acts as a protective layer against corrosion, preventing the earthing electrode from deteriorating over time.

Therefore, by adding salt and charcoal in the earthing pit, the conductivity of the earthing system is improved, resulting in a more effective and reliable earthing system for electrical safety.