Ucplums

17/10/2026

Simple homeowner check
If your toilet water rises unusually high when you flush, stop flushing repeatedly. Check the situation before it becomes an overflow.

A toilet that keeps blocking is not always a “bad toilet.” Sometimes the real problem is underneath the floor.

Have you ever had a toilet that kept blocking again and again? What was eventually found to be the problem?

Drop your experience in the comments.

17/10/2026

Have you ever flushed your toilet and noticed that the cistern keeps filling without stopping? Or does it take too long for the tank to fill?

The problem could be a faulty fill valve!

Here’s how to replace it

✅ 1. Turn off the water supply. Close the isolation valve and flush the toilet to empty the cistern.

✅ 2. Remove the old fill valve. Disconnect the water supply hose and loosen the retaining nut beneath the cistern.

✅ 3. Install the new fill valve. Position the sealing washer correctly, fit the new valve, and secure it without overtightening.

✅ 4. Reconnect the water supply. Slowly turn the water back on and allow the cistern to fill.

✅ 5. Test your work. Check for leaks and confirm that the water stops at the correct level.

If your toilet continues running after replacing the fill valve, don't rush to buy another one! Check the flush valve seal and water level. The problem might be somewhere else.

⚠️ Always follow the new valve manufacturer's instructions and check for leaks before finishing the job.

understanding your plumbing helps you avoid unnecessary expenses and costly mistakes.

Have you ever replaced a toilet fill valve yourself, or would you prefer to call a plumber? Tell us in the comments!

Follow for more practical plumbing tips, maintenance advice, and professional solutions.

16/10/2026

Small checks today prevent big leaks tomorrow. 💧

Need a professional eye? Send me a DM.



Make it a habit: Check visible plumbing fixtures monthly and arrange a more thorough inspection periodically, especially in older homes.

15/10/2026

What do you think of this finishing? Drop your comment.

15/10/2026

get the drainage installation done properly from the beginning. Wrong pipe slope, poor connections or an unsuitable pipe arrangement can create recurring blockage problems.

15/10/2026

If your toilet keeps making a filling sound even when nobody has flushed it, water may be escaping from the tank into the bowl.

13/10/2026

Show mixer fix

Find local businesses, view maps and get driving directions in Google Maps.

12/10/2026

A small water leak can become a big building problem!

Some plumbing problems don't start with a burst pipe. Sometimes, they begin with one small drop of water that nobody takes seriously.

As a plumber, these are the places I recommend checking during your home maintenance routine:

1. Under the bathroom and kitchen sinks — check for moisture around the pipe connections.
2. Behind the toilet — inspect the water supply connection for dripping.
3. Around the toilet base — watch for unexplained water or dampness.
4. Bathroom walls and ceilings — look for fresh stains, peeling paint or damp patches.
5. Water storage and pump connections — check for visible leaks and loose fittings.

My professional advice: Don't wait until water starts damaging your tiles, cabinets or walls before investigating the problem.

Finding a leak early can save you unnecessary repair costs.

At UCPLUMS, we help homeowners with plumbing inspections, leak repairs, installations and plumbing support for new construction projects.

Let's talk!

Which plumbing problem have you experienced in your home: a leaking pipe, a running toilet or low water pressure?

Drop your answer in the comments. Let's learn from one another!

12/10/2026

Which plumbing problem have you experienced in your home: a leaking pipe, a running toilet or low water pressure?

11/10/2026

Let's fix this bottle trap under the kitchen sink Ucplums