Total Ag Control

Total Ag Control Total AG Control is your expert in precision farming, specialising in spreaders and sprayers.

With a brand-agnostic approach, we seamlessly integrate precision solutions from reputable companies for new builds or retrofit.

The yard’s spawning spreader trucks left, right and centre at the moment — 19 + new trucks we believe! 👀🚛Looks like it’s...
27/05/2026

The yard’s spawning spreader trucks left, right and centre at the moment — 19 + new trucks we believe! 👀🚛

Looks like it’s going to be a busy season ahead for Tony, Nev and Bradley. Bring it on! 💪

11/05/2026

Another tidy install completed by Total Ag Control 👌

This spreader truck for Frews Transport Oxford is now running the JWE V3+ control paired with TiroTech Guidance & Job Management — giving the operator accurate rate control, precision GPS guidance, live job tracking, variable rate mapping, and seamless job management all from the cab.

The setup also features a quality bin built by our mates at Engineering Repairs 2012 Ltd , alongside SI Lodec load cells for accurate onboard weighing — helping maximise every load, improve spreading accuracy, and keep operations running efficiently day in, day out.

A smart setup built for modern spreading. 🚜

10/05/2026

Bit of an upgrade job we knocked over recently for Dairy Holdings 👌
We swapped out the old Topcon Agriculture X20 for the new X25 setup in this Isuzu spray truck, bringing the guidance and control system right up to date. This truck’s also running Tabula proof of placement, giving accurate tracking and confidence the job’s being done right every pass.
To make things easier for the operator out in the paddock, we also custom-built an external switch panel so sections can be turned off without having to muck around on the screen.
Simple, tidy and built to make the job easier where it counts 🚜

07/05/2026

Workshop’s been flat out lately with new spreader builds rolling in left, right and centre — so here’s one we knocked over last month for Stubbs Groundspreading.

We fitted out their new Scania Group 45-P XT with the full works, including a rebuilt centre console, JWE Whitehead controller, Tabula for precision placement, tyre inflator, work lights and scales. We also custom-built a joystick setup to make the master switch a bit more operator-friendly in the cab.

While we were at it, we gave the second-hand Engineering Repairs 2012 Ltd bin a tidy-up too — sorted the wiring, replaced sensors and fitted a new main cable so she’s ready to get stuck into it.

Plenty more builds coming through the workshop yet 👌

24/03/2026

We’ve just fitted a CHC Navigation NX612 to this harvester — and it’s a game changer.

Super accurate right through from crawling speeds (0.1 km/h) up to 30 km/h 🚜
Able to run GNSS + RTK for pinpoint precision, plus heaps of guidance patterns to suit whatever job you’re on.

Packed with features and ready to handle it all 💪

⛽️ Fuel prices creeping up again? Yeah… we’re all feeling it.But here’s a bit of good news 👇Smart guidance isn’t just fl...
24/03/2026

⛽️ Fuel prices creeping up again? Yeah… we’re all feeling it.

But here’s a bit of good news 👇
Smart guidance isn’t just flash tech — it actually saves you money where it counts.

By tightening up your runs and cutting out overlaps, you can:
✔️ Use less fuel (up to 15% savings)
✔️ Reduce wasted fert & spray
✔️ Get the job done quicker with less stress on the gear

It’s all about working smarter, not harder — especially when every litre counts.

If you’re already on guidance, you’ll know the difference. If not, now’s a pretty good time to start thinking about it 👍

The boys have been back at it in Rangiora, fitting a Topcon Agriculture X25 with a light bar and an ISO conversion to r...
13/03/2026

The boys have been back at it in Rangiora, fitting a Topcon Agriculture X25 with a light bar and an ISO conversion to run the SAM spreader. 🚜

This setup gives the driver clear guidance across the paddock while running the spreader, helping keep lines straight and avoid those annoying skips and overlaps. Means better coverage, less waste, and a tidy job done right the first time. 🌱

The team’s been up at the Rakaia Mouth fitting a CHC Navigation Guide 10 and an ISO conversion to this Massey 8240. 🚜Thi...
10/03/2026

The team’s been up at the Rakaia Mouth fitting a CHC Navigation Guide 10 and an ISO conversion to this Massey 8240. 🚜

This setup gives you solid accuracy in the paddock, helping keep the tractor running straight so you cut down on skips and overlaps. That means better coverage, less wasted gear, and a better result for crop yield and quality. 🌾

Best part? This cost-effective system is only $3,000+GST, making precision guidance a no-brainer for a lot of setups.

12/02/2026

Last day to come yarn with us at the Southern Field Days - Waimumu – we’ve got live demos running all day! 👌

Check out the CHC Navigation steering systems in action with auto-mapped, self-guiding runs across a full paddock. Makes life easy!

Systems are only $11,000 + GST 💰

We’ve also got heaps of other retrofit options on display, so make sure you swing by and see us before we head back to Canterbury! 🚜🌾

11/02/2026

Another CHC Navigation steering system dialled into this 520hp New Holland combine! 💪
Customer reckons they “could never go back to manual steering” — and we hear that a lot 👌
Happy customers all round. Systems from just $11,000 + GST.
Come see us at the Southern Field Days - Waimumu and have a yarn to find out more!

Address

187 Alford Forest Road
Ashburton
7700

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+64274552272

Website

Alerts

Be the first to know and let us send you an email when Total Ag Control posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Total Ag Control:

Shortcuts

Share