Vantage Aluminium Oamaru Ltd

13/03/2026

13/03/2026

The historic Kurow hotel has undergone a major refurbishment, blending earthquake strengthening with careful restoration of its 1880 heritage charm. Owners Trish Paton and Ross Paton have transformed the upstairs accommodation with refreshed rooms, restored timber ceilings, and stunning exposed Oamaru stone features.

Located along the Alps 2 Ocean Cycle Trail, the beloved “top pub” remains a welcoming stop for cyclists, travellers, and locals alike.

Level Electrical Oamaru Vantage Aluminium Oamaru Ltd

Full Story👇

25/08/2025

It’s nearly time to start the spring cleaning!

Here's what we recommend for cleaning your aluminium windows & doors

Cleaning once every three months is recommended for windows and doors. In coastal or industrial environments more
frequent washing will be required.

We recommend cleaning with a soft brush with warm water and some mild household detergent before rinsing with fresh water

Do not use abrasive steel wool, scrapers, scouring liquids, aggressive solvents or thinners as these are likely to damage
the surface finish.

The cleaning cycle should include the removal of build-up in door tracks to ensure the maintenance of drainage paths,
and continued smooth operation of rollers.

Regular maintenance of hardware is recommended.

Powder coated hardware should be cleaned regularly with a wet sponge or soft brush, warm water and a mild detergent
then rinsed with fresh water. Plated product should be cleaned with a wet sponge without the use of detergent as the latter can damage plating.

Stainless steel hardware needs to be cleaned regularly and care needs to be taken when rust spots occur. Even the highest grades of stainless steel can develop rust spots and these can be removed with a mildly abrasive cleaner and rinsed with fresh water. In cases of heavy corrosion a Scotch-Brite" hand pad can be used. Specialised 3M®
Stainless Steel Cleaner and Polish is also available as an alternative cleaning compound.

TAKE CARE WITH GLASS

Glass is a very delicate product that can easily be damaged. Care is needed to ensure that scratching does not occur.

Only detergents and cleaning solutions which are recommended for glass should be used. Commence cleaning by soaking the glass to loosen dirt. Using a mild, non-abrasive solution, uniformly apply to the glass surfaces. Ensure that the solution is removed by rinsing with water as cleaning residue can permanently mark glass.

11/08/2025

Be in to WIN a Vantage Motorsport and Ben Hunt Prize Pack 🏁 🏆Ben Hunt is gearing up for the North Island rally stages and we want to see YOUR support in the lead-up!

📸 How to enter:
Post in the comments your best fan photo, poster, or message of support and show us how you’re backing Ben!

Entries close 25 August

Let’s flood the feed with support and bring the energy to the North Island stages! 💥




T&C's apply
For Full Terms and Conditions please visit - www.vantage.co.nz/Sponsorship

09/08/2023

Congratulations to the team at Vantage Aluminium Oamaru Ltd, you're this week's winners of the Laser Electrical Oamaru Workplace Shout! 🥳
Morning tea from Taste Cafe is on us tomorrow - enjoy!
See the team at Taste Cafe today for a tasty treat with their selection of delicious sweet and savoury cabinet goodies plus their fantastic all day menu! 🤤
Keep an eye out next Tuesday for your chance to WIN!!

26/07/2023

For all our builders out there … ❤️

14/07/2022

Calling all builders ….

CALLING ALL BUILDERS! Thanks for your hard work through the winter chill.
To say thanks and to help you stay warm while you work on tomorrow’s thermally efficient homes, we have a huge Swanndri winter warmer clothing pack (valued at RRP $690) to give away. Get your entry in before 11:59pm 17th July 2022 and it could be yours!
https://bit.ly/win_Swanndri
T&Cs apply. This competition is not associated with Facebook or Swanndri.

09/01/2022

Hi, we have 2 positions available for a junior and senior aluminium fabricator. Message us for more details.

09/01/2022

2 positions available to start in the new year (date to be discussed with successful applicants)

Looking for a young motivated person who would like to learn a trade in a busy industry.
You will need to be
•physically fit,
•have a great work ethic, honesty & reliability,
•able to work as part of a team,
•pride in work,
•able to follow health & safety guidelines
•NZ residency or a valid NZ work Visa

Looking for a fabricator with at least 2 years experience (more would be an advantage)
You will need
•experience working in the aluminium joinery business,
•excellent attention to detail,
•problem solving skills,
•physically fit,
•able to follow health & safety guidelines
•NZ residency or a valid NZ work Visa

Send a message to learn more

23/12/2021

Thank you so much to everyone that has supported us over the past year. It has been a bit of a crazy one!Have a Merry Christmas. See you in 2022!

02/12/2021

Some internal residential doors we completed recently to replicate the steel ones that have come back in style.