31/05/2022
Garbage Chute:
Product Description
linen chute, trash chute, rubbish chute, garbage chute
Chute
Our Linen Chutes are fully factory fabricated with all joints welded or lock seamed. There is one slip joint per floor. All chutes have a flush interior and are assembled without bolts, rivets or clips protruding into the chute opening. Chutes are equipped with chute support clips pre-positioned at the factory to insure proper chute alignment. The adjustable intake door and frame are securely fastened to the intake throat. If required, off-sets will be reinforced and supported in impact areas.
Material
Our chutes are constructed of 16 gauge standard stainless steel, SS316, SS304
Sizes
Chutes are available in 36″, 30″, and 24″ diameters. The standard chute size is 24″ per NFPA recommendations.
Intake Doors
Our self-closing intake doors are constructed of 16 gauge polished stainless steel fronts and backs. Each door is equipped with a chrome plated T-handle with lock & two keys, fire rated latching mechanism and stainless steel pivot hinge, and L handle is available, ADA compliance with.
Discharge Doors
Two types of fire discharge doors are available from QDCHUTE. The standard sliding discharge is spring loaded and help open with a 155° U.L. approved fusible link.
The sliding discharge is used for both trash & linen chutes when the material drops directly into a container. Hopper type discharge doors consist of a stainless steel "B" label constructed type door held open by a 155° U.L. approved fusible link. Hopper type discharge doors are used when a 90° offset is required to go thru a wall.
Vents
The vents are made the same diameter as the chute and extend above the finished roof per NFPA recommendations. Vents are constructed of 16 gauge stainless steel and are complete with roof flashing and metal weather cap.
Sprinkler System
We furnish one U.L. approved 1/2″, 155° automatic brass sprinkler head above the top intake door of each chute complete with a fitting for connection by a plumber. Depending on the number of floors and local fire codes, additional sprinkler heads are furnished on alternate lower floors.
Flushing Head
We furnish one 1/2″ brass spray head, above the intake door of each chute, complete with a fitting for connection by plumber.
Optional Equipment
When required, optional equipment are available:
1. Intake door can be opened by Password, S-card, Fingerprint, etc.
2. Sprinklers
3. Exhaust Ventilation fan with user-defined control, Lockouts for specific hours of the day.
4. Electric door interlocks, interlocking for providing access to single user at a time.
5. User warning systems
6. Automatic Brush System,
7. Sound insulation,
8. Isolator pads,
9. Sanitizing units,
10. Smoke detectors with Fire linkage.
Contact us for specific information.
[email protected]
Mobile +97455995512 / whatsapp
