Woodhams Carpentry, LLC

Woodhams Carpentry, LLC Custom Frame to Finish Custom Carpentry based out of Andover, NH.

Frame to Finish

- Siding
- Roofing
- Decks
- Interior/Exterior Trim
- Additions & Remodeling
- New Structures

05/29/2026

We finished another room in the media center at NHMS, the EJ Prescott suite is just about ready for paint aswell! This room was a fast 2-3 day project we hung shiplap and did the trim and enclosed a metal locker for the photographers to keep their cameras and things in. The artwork always makes these rooms look great in my opinion so kudos to whoever does that! As always Erich Petty Painting made out work look great!

04/16/2026

We revamped the restaurant at NHMS over the winter, we are also doing a suite for EJ Prescott, and we did another area in the media center over aswell!

I've had many customers ask how Cody Griffin  is, what he's doing or even where's he's been, Cody has been working at hi...
03/21/2026

I've had many customers ask how Cody Griffin is, what he's doing or even where's he's been, Cody has been working at his EMS/fire career for quite some time. He originally would work 40 hrs with me during the day and go to school multiple nights a week while juggling his family life in there aswell. Even with all that pressure and stress, Cody kept his positive attitude and just got it done. Some days he'd look exhausted but he was still on time to work and still did his job as good as always. Beyond proud of him even though I can't pick on him as frequently anymore!

Sneak peak of the EJ Prescott suite at NHMS, this will be the third suite we've done. Very grateful to be back at the tr...
02/17/2026

Sneak peak of the EJ Prescott suite at NHMS, this will be the third suite we've done. Very grateful to be back at the track again leaving our mark! Ill do my best to keep up with photos but I seem to forget every time haha

We've been as busy as ever, we finished the shower on the hill job before Christmas, but are holding off on the remainin...
01/21/2026

We've been as busy as ever, we finished the shower on the hill job before Christmas, but are holding off on the remaining trim work for now, we also are framing a house in Alexandria in combination with a few jobs we have going at NHMS! I'll try to make sure Tyler and I do better about posting our work on here!

11/21/2025

We’re working on the interior of the garage/home we built in Hill. A lot of builders charge an extra cost to pre build trim kits and pocket screw them togther, we pretty much do this method any time we can it ensures a good tight joint and helps make our painters jobs easier aswell, now they can pre paint a coat ahead of time without the hassle of cutting in etc, if you are interested in the tools needed for this you can buy a cheap Kreg jig at the box stores and get started!

New Andersen e series slider, this is a 6’ unit with an added 3’ fixed pane. New pvc trim on the exterior and new pine i...
11/12/2025

New Andersen e series slider, this is a 6’ unit with an added 3’ fixed pane. New pvc trim on the exterior and new pine inside. Hopefully the next slider we get to do is not as heavy haha

New kitchen cabinets we installed in Tilton, we removed the old kitchen took down the drywall to have new outlets instal...
10/29/2025

New kitchen cabinets we installed in Tilton, we removed the old kitchen took down the drywall to have new outlets installed, installed blocking for the cabinets, new drywall, home owners are priming/painting. Cabinets and the recommendation of us installing came from Cyr lumber in Tilton, if you have a kitchen or bath project go in and chat with the designers they have and get the ball rolling!

09/22/2025

Home I’ve done a lot of work to, for repeat customers. The garage door is being replaced in the next few weeks so the old trim needed to be upgraded to PVC, the contractor that built the home just sucked for lack of better terms. They nailed down through the j-channel into the trim that was wrapped with coil stock. This creates a leak point that over the past 20 years has completely destroyed the header beam. This is the danger with using the cheapest bid or contractors without references and an established business. A simple retrim would have been a half day and like 8-900$ with materials, this now is unfortunately multiple days and much more money due to an inexperienced contractor making a mistake. Or perhaps an as***le who doesn’t care…either way if you’re going to do it try to do it properly, people work hard for their money and deserve to have a good product

We just finished up this garage door upgrade for one of a favorite clients, He had 9x9 doors and wanted to upgrade to 10...
08/07/2025

We just finished up this garage door upgrade for one of a favorite clients, He had 9x9 doors and wanted to upgrade to 10’, one door grew in width as well to become a 10’x10’, we re-insulated and installed 3/4 plywood on the inside wall to allow him to hang tools and whatnot wherever he desires! We will be residing this home in the future so the exterior lights will be centered once we get to that stage

Address

331 Flaghole Road
Andover, NH
03231

Telephone

+16037079306

Website

Alerts

Be the first to know and let us send you an email when Woodhams Carpentry, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Woodhams Carpentry, LLC:

Share

Category