QC Hardwood Flooring

QC Hardwood Flooring Certified by the NWFA hardwood flooring company serving the Quad Cities and surrounding areas.

Here is a walnut project we recently finished up. This one we were tasked to install 5” walnut and make it look like the...
04/30/2026

Here is a walnut project we recently finished up. This one we were tasked to install 5” walnut and make it look like their existing floor. So to do so we have to hand scrape with deep grooves, stain, seal, and finished. It came out great and the customer were super happy considering their old floor they have was no longer available. So we just created it!

Wrapped up this one today in Moline. On this one we had to demo carpet, and particle board, then re sheet with plywood f...
03/13/2026

Wrapped up this one today in Moline. On this one we had to demo carpet, and particle board, then re sheet with plywood for stability and height. We then installed 5” red oak and stained to match their existing wood floors.

Here is a recent job we did in Moline. We stained this one Heritage Brown with Loba 2k in satin sheen.
03/07/2026

Here is a recent job we did in Moline. We stained this one Heritage Brown with Loba 2k in satin sheen.

We finished up a sand and ref finish this week in LeClaire. This one we stained warm gray and finished with a satin wate...
02/15/2026

We finished up a sand and ref finish this week in LeClaire. This one we stained warm gray and finished with a satin water finish.

Here is a red oak staircase we recently wrapped up. We prefinished the parts in our shop to match woodwork and floors we...
02/12/2026

Here is a red oak staircase we recently wrapped up. We prefinished the parts in our shop to match woodwork and floors we did last year.

Here is a recent sand and refinish in Davenport. This one is red oak stained Early American, finished with Loba easy fin...
02/12/2026

Here is a recent sand and refinish in Davenport. This one is red oak stained Early American, finished with Loba easy finish.

Today finished up a kitchen project in . We tore out many layers of old vinyl and tile, re sheeted a section to bring t...
01/24/2026

Today finished up a kitchen project in . We tore out many layers of old vinyl and tile, re sheeted a section to bring the height up to the same as the addition of this 1920s home. We installed 2 1/4” rift and quarter red oak to match the rest of the home. We used oil based Duraseal Plus to finish.

We recently finished up another section of this addition. We installed 1 1/2” red oak to match the rest of the house the...
10/24/2025

We recently finished up another section of this addition. We installed 1 1/2” red oak to match the rest of the house then did a custom stain to match the existing woodwork.

Here is a job we finished recently in . This one was a maintenance coating over an older oil based polyurethane where t...
10/12/2025

Here is a job we finished recently in . This one was a maintenance coating over an older oil based polyurethane where the customer wanted to have the finish toned down and the sheen to be consistent. We used contact solution in conjunction with their 2k duo (commercial finish) in a satin sheen.

Some before and afters of a recent job in Davenport, IA.
10/09/2025

Some before and afters of a recent job in Davenport, IA.

Recent sand and refinish in Silvis, IL. Hit us up if your floors are needing a refresh!
09/16/2025

Recent sand and refinish in Silvis, IL. Hit us up if your floors are needing a refresh!

Address

Bettendorf, IA

Website

Alerts

Be the first to know and let us send you an email when QC Hardwood Flooring posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category