WB Logging and Timber Management

04/14/2026

Basal area is one of the most important measurements in forest management—it tells you how crowded your forest is and how much of the ground is occupied by tree stems.

So let’s break down exactly what it is and why it matters.

🌲 What basal area actually means

Basal area is the cross-sectional area of tree trunks at breast height (4.5 feet above the ground), measured over a given area—usually square feet per acre.

Think of it like this:
If you cut every tree at 4.5 ft and looked straight down at the stumps, basal area is the total area those circles would cover.

⸻

📏 Why it matters

Basal area helps you understand:
• Stocking (density): Is your forest overcrowded or too open?
• Growth potential: Trees compete for sunlight, water, and nutrients
• When to thin: High basal area = too much competition
• Timber value: More basal area often means more wood volume (up to a point)

⸻

🌿 Simple example
• A young pine stand might be around 60–80 sq ft/acre
• A dense, overcrowded stand might be 120–150+ sq ft/acre
• Many managers in East Texas aim for:
• 70–90 sq ft/acre after thinning for healthy growth

⸻

⚖️ The balance
• Too low basal area:
You’re understocked → wasted growing space
• Too high basal area:
Trees compete heavily → slower growth, more stress, higher risk of:
• Disease
• Insects
• Fire

⸻

🔧 How it’s measured

Foresters usually use:
• A prism (angle gauge) for quick estimates in the field
• Or measure tree diameters and calculate it mathematically

⸻

🌲 In practical terms (what you’d see)

In a pine stand:
• High basal area: crowded canopy, little sunlight hitting the ground, slower growth
• After thinning to proper basal area: more spacing, healthier crowns, faster diameter growth

⸻

🧠 Bottom line

Basal area is basically your forest’s “crowding gauge.”
Managing it properly is what keeps your timber:
• Growing faster
• Healthier
• More valuable

Think your forest might be over crowded? Call us today at 936-523-0033.
Check out our website for more information www.WBLogging.com

04/09/2026

Let’s Talk Before and After

Every logging job looks different beforehand, so it only makes sense that each one will look different afterward. The outcome largely depends on the current condition of your timber.

When harvesting pine, the tops and branches typically settle closer to the ground. In contrast, older, more mature hardwoods tend to leave behind more visible debris due to their larger limbs and heavier branching.

It’s important to remember that this leftover material—often called slash—serves a purpose. It helps protect the soil from erosion and gradually returns valuable nutrients back into the ground.

Keep in mind, the appearance of logging debris is temporary. With proper forest management, harvesting not only improves the long-term health of your timber but can also provide significant financial benefits.

For more information please visit our website at www.WBLogging.com or call us today 936-523-0033

04/08/2026

This is a great photo illustrating how pine growth rates change after harvest. The red highlights areas where the growth rings are closer together, indicating slower growth. The green highlights areas where the rings are spaced farther apart, indicating faster growth.

Don’t delay managing your timber, you could be missing out on valuable growth!

For more information check out our website at www.WBLogging.com or call us today at 936-523-0033

04/08/2026

Let’s talk about Prescribed Burns

A prescribed burn (controlled burn) is one of the most effective tools for managing forests in Texas—but it requires careful planning, the right conditions, and often legal compliance. Here’s a clear, practical breakdown of what you need to know:

⸻

🔥 What a Prescribed Burn Does
• Reduces fuel buildup (dead leaves, pine needles, brush)
• Lowers risk of wildfire
• Controls invasive species
• Improves wildlife habitat
• Promotes healthy growth of native grasses and trees (especially pine ecosystems common in East Texas)

⸻

📋 Legal & Regulatory Basics (Texas)
• You’re responsible for the fire—even if it spreads.
• Must comply with the Texas Commission on Environmental Quality rules on outdoor burning.
• Notify:
• Local county officials (sometimes required)
• Nearby neighbors (strongly recommended)
• Burn bans: Always check with your county before burning.
• If you’re unsure, consider working with a certified burn manager through the Texas Prescribed Burn Board.

⸻

🌦️ Ideal Weather Conditions

You want predictable, mild conditions:
• Wind: 5–15 mph (steady direction)
• Humidity: 30–55%
• Temperature: Typically 50–80°F
• Soil moisture: Not too dry (helps prevent deep burning)
• Avoid:
• High winds
• Drought conditions
• Incoming cold fronts (winds can shift fast)

⸻

🧯 Preparation is Everything

1. Firebreaks
• Clear lines (10–20+ feet wide) around the burn area
• Can be disked soil, roads, or natural barriers

2. Equipment
• Water source (tank, ATV sprayer, or truck)
• Drip torch
• Hand tools (rakes, flappers, shovels)
• Communication (radios or phones)

3. Crew
• Never burn alone
• Have enough people to monitor all sides

⸻

🔥 Types of Fire You’ll Use
• Backing fire (slow, against the wind): safest, most controlled
• Flanking fire (along sides): moderate intensity
• Head fire (with wind): fast, intense—use carefully and only when planned

⸻

⚠️ Risks to Watch
• Escape due to wind shifts
• Spot fires (embers blowing outside lines)
• Smoke hazards (roads, neighbors)
• Tree damage if fire gets too hot

⸻

🌲 Timing for East Texas Forests
• Late winter to early spring is most common
• Some burns done in growing season for specific vegetation control
• Pine forests respond especially well to periodic burning every 2–5 years

⸻

🧠 Pro Tips
• Start small if you’re new
• Burn in sections instead of all at once
• Watch smoke direction as much as flames
• Have a contingency plan (what if it jumps the line?)

⸻

🤝 Consider Professional Help

If it’s your first burn, hiring or consulting a certified burn manager or contacting the Texas A&M Forest Service is highly recommended—they can help with burn plans and safety.

04/08/2026

East Texas has a rich and fascinating logging history shaped by its vast pine forests and the growth of the timber industry. Here are some interesting facts:

🌲 1. The Piney Woods Region

East Texas is part of the Piney Woods, a dense forest dominated by loblolly, shortleaf, and longleaf pine. These forests made the region one of the most important timber-producing areas in the southern U.S.

🚂 2. Logging Railroads Were Everywhere

In the late 1800s and early 1900s, logging companies built temporary railroads deep into the जंगल to haul timber. Towns often sprang up around these rail lines—and disappeared once the timber was gone.

🪓 3. Boom-and-Bust Lumber Towns

Places like Diboll and Lufkin became major lumber centers. Entire communities depended on sawmills, and when timber ran out, many towns declined or vanished.

🏭 4. The Southern Pine Lumber Boom

From about 1880 to 1930, East Texas was at the heart of the Southern Pine Lumber Boom. Millions of acres of virgin pine were harvested during this time, supplying lumber across the U.S.

🔥 5. Fire Was a Constant Threat

Logging debris (called “slash”) left behind after cutting made forests highly flammable. Combined with overcrowded stands, this led to frequent and intense wildfires.

🌱 6. Reforestation Changed Everything

By the 1930s, most virgin timber was gone. That led to better forest management practices like replanting and thinning—turning East Texas into a model for sustainable forestry today.

🧑‍🌾 7. Timber Is Still Big Business

Forestry remains a major economic driver in East Texas, with companies growing, harvesting, and processing pine for paper, lumber, and plywood.

🏛️ 8. Logging History Is Preserved

You can explore this history at places like the Texas Forestry Museum, which showcases old logging equipment, tools, and stories from the timber boom era.

🐘 9. Giant Logs and Steam Power

Early logging used steam-powered skidders and massive sawmills. Some logs were so large they required specialized equipment just to move them.

🪵 10. “Cut-Out and Get-Out” Era

Early logging practices often cleared entire areas with little concern for regrowth. This “cut-out and get-out” approach is why sustainable forestry practices became necessary later on.

04/06/2026

Knowing when to thin your timber is essential for proper forest management. One clear sign that thinning is needed is the presence of fallen or dying trees on the forest floor, which often indicates overcrowding.

When a forest reaches this stage, it becomes more vulnerable to insect infestations and wildfires. In addition, overcrowding limits the growth potential of your remaining trees, reducing the overall productivity and health of your timber stand.

Check out our website www.WBLogging.com for more information or call us today at 936-523-0033

04/05/2026

04/01/2026

Attention Texas Landowners!!! Free Webinar on How to Create a Prescribed Burn Plan

Texas A&M AgriLife is hosting a free webinar series on how to create a prescribed burn plan. Learn how to turn your management goals into a written burn plan you can actually use in the field.

They’ll cover objectives, maps, weather and fuel parameters, smoke considerations, contingency planning, and documentation to support safety and liability needs. This will include reviewing a previous burn plan and opening up to Q&A.

This is a step-by-step workshop to cover all parts of writing. The webinar will be on Tuesday, April 14th, 2026 from 6pm-7:30pm. Visit

https://agriliferegister.tamu.edu/ereg/newreg.php?eventid=874130&

Benefits of a prescribed burn

Prescribed (controlled) burning is a widely used land management practice in East Texas forests—especially in ecosystems like the Piney Woods. When done correctly, it provides several important ecological and practical benefits:

1. Reduces Wildfire Risk

Prescribed burns remove built-up “fuel” like dead leaves, pine needles, and underbrush.

Without this, forests in East Texas can become dangerously overgrown, increasing the risk of severe wildfires—especially during dry periods.

2. Improves Forest Health

Fire helps:

• Recycle nutrients back into the soil

• Reduce disease and pest infestations

• Thin out overcrowded trees

This leads to stronger, more resilient forests over time.

3. Promotes Native Plant Growth

Many native species in East Texas are adapted to fire and actually depend on it. Burning:

• Encourages grasses and wildflowers

• Suppresses invasive species

• Helps fire-adapted trees like Longleaf Pine regenerate

4. Enhances Wildlife Habitat



After a burn, new plant growth provides high-quality food and cover for wildlife such as:

• Deer

• Turkey

• Quail

This improves biodiversity and supports healthier animal populations.

5. Controls Undergrowth

Prescribed fire clears thick brush that can:

• Limit movement for wildlife

• Block sunlight from reaching the forest floor

• Make land difficult to access for management or recreation

6. Improves Grazing and Land Use

For landowners, burns can:

• Increase forage quality for livestock

• Make pastures and forest edges more productive

• Reduce reliance on mechanical clearing or herbicides

7. Cost-Effective Land Management

Compared to heavy machinery or chemical treatments, prescribed fire is often:

• More affordable

• Faster over large areas

• More natural for the ecosystem

Important Considerations

Prescribed burns must be carefully planned:

• Weather conditions (wind, humidity) must be right

• Firebreaks are required

• Permits and trained personnel are often needed (e.g., through the Texas A&M Forest Service)

Bottom Line

In East Texas, fire isn’t just helpful—it’s part of the natural system. Prescribed burning restores balance, reduces danger, and keeps forests productive and healthy.

For more information on managing timber and available grants please visit our website at www.WBLogging.com or give us a call at 936-523-0033.

A full service logging company that caters to the timbering needs of East Texas

03/24/2026

03/23/2026