Tectum Roofing

Tectum Roofing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Tectum Roofing, Roofing service, 770 Wooten Road SUITE 105, Colorado Springs, CO.
(9)

07/24/2026

Walkway pads are one of the simplest ways to protect your roof from foot traffic damage.

These are typically installed near:

access doors
HVAC units
maintenance areas

Why? Because this is where people are constantly walking, dropping tools, and causing wear over time.

They’re not always required — but they’re one of the best upgrades you can recommend to building owners for long-term protection.

There is one situation where walkway pads are required…

👇 Drop it in the comments if you know.

07/24/2026

If your panels aren’t symmetrical, the problem started before installation.

Proper layout means:

finding your center line
planning your starter panel
making sure your finish panel matches

When you don’t do this, you end up with uneven panels — like a 3-inch piece on one side and a 9-inch piece on the other.

That’s not just a visual issue… it’s a sign of poor planning and ex*****on.

Clean layout = clean finis

07/24/2026

Not all drain components are created equal.

This plastic drain basket shouldn’t come off like this — but with cheaper materials, it happens all the time.

Proper drain baskets are designed to lock into place and stay secure.

If they don’t, you risk:

debris getting in
clogged drains
water backup on the roof

This is why material choice matters — because small details like this can turn into bigger issues over time.

07/24/2026

If your contract doesn’t clearly state that other trades are responsible for protecting the roof, you’re setting yourself up to lose money.

Damage happens — but if it’s not documented and marked, you can end up spending hours trying to track it down and fix it.

That turns into unpaid labor, back charges, and frustration.

Your contract should:

make other trades responsible for protection
require them to mark any damage immediately
protect your time and your profit

Because if you don’t control this upfront, it will cost you later.

07/14/2026

One of the biggest problems on commercial jobs is other trades not protecting the roof.

These metal burrs from cutting and threading pipes may look small — but they are sharp enough to puncture the membrane.

On top of that, they leave behind rust marks that can lead to long-term issues.

All it takes is one of these to create a weak point… and eventually, a leak.

This is why jobsite coordination and cleanup matter — because damage like this leads to repairs, callbacks, and finger-pointing.

07/14/2026

Before this gets poured and closed up, it has to pass an open hole inspection.

This is where structural elements like beams are set, and the building department needs to verify everything is correct before it’s covered.

If you skip this step and move forward, you risk failing inspection and having to tear it back out.

It’s one of those processes that might seem small — but it’s critical to the entire build.

07/14/2026

If you’re not breaking your job into zones, you’re already behind.

On large commercial projects, everything should be mapped out:

landing zones

production targets

timelines per section

When you divide the job into sections, you can track progress and adjust crews in real time.

If one area falls behind, you shift resources and keep production moving.

No plan means no control — and that’s how jobs run late and lose money.

07/11/2026

Insulation layout isn’t random — it directly affects the strength of the roof system.

Insulation should always run perpendicular to the deck.

If you run it the same direction as the deck flutes, the edges can hang over unsupported areas, creating weak spots.

That’s why systems are installed in a perpendicular pattern, especially in high-wind zones.

Do it wrong, and you risk failing inspections and compromising the system.

07/11/2026

Pipe boot installation is one of the details that separates rookie installs from professional work.

If the boot isn’t cut, marked, sealed, and welded correctly, you can end up with fish mouths and weak seams that lead to leaks later.

A simple process like marking the top, applying water block, and welding properly around the boot makes a huge difference in how the system performs long-term.

Small details like this are what prevent callbacks and failures.

07/11/2026

If your screws keep popping or not setting right, you’re probably fastening too deep into the structure.

On commercial decks, you’re supposed to fasten into the top rib, not into the bar joists below.

If your screws are too long, you’ll hit steel, struggle to set them, and waste time trying to adjust.

That’s why we only use screws long enough to catch the top rib — not the structure underneath.

Small detail… but it makes a huge difference in install quality and efficiency. Visit our website for more roofing tips and business insights. executiveroofcoach.com

Address

770 Wooten Road SUITE 105
Colorado Springs, CO
80915

Website

Alerts

Be the first to know and let us send you an email when Tectum Roofing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category