Mike's Performance Engineering - MPE

Mike's Performance Engineering - MPE Full Restoration, Fabrication, Electrical, Welding, Body, Dustless Blasting, Custom Coatings, etc.

Mazda mini truck we finished up last winter. We Built a custom frame, custom bed and custom wiring harness and air ride...
02/11/2026

Mazda mini truck we finished up last winter. We Built a custom frame, custom bed and custom wiring harness and air ride system. We also frenched the rear lights and tailgate. We did a new gauge panel and fuel system also. The customer will finish the rest of the build. We are so lucky to have good customers that allow us to build these wild cars!

1956 Cadillac we've been restoring and updating for a couple years. We got all the metal repair work done on the body a...
02/01/2026

1956 Cadillac we've been restoring and updating for a couple years. We got all the metal repair work done on the body and frame. We built a mild 6.0 LS for it attached to the previously installed th350. We added vintage air and aftermarket fuel injection. We built a custom front belt system. We are now starting to do a full custom wiring harness. We also had the coils behind the air cleaner and ran a stock looking plug wire setup. Will post more on this soon.

Build pictures from the truck in the video yesterday.
01/28/2026

Build pictures from the truck in the video yesterday.

01/27/2026

89 c1500 we just delivered. We did a cammed LS3 with Holley efi and 6l80. We also installed new front and rear suspension. Built a full new custom wiring harness for the entire truck and some other trick fabrication. I'll post more pictures of the build process soon. Thanks again to all our great customers who keep us busy doing what we love!

Some intake and exhaust tubing work we did on a good friend's SBC twin turbo race car. Can't wait to see this one rip! ...
08/26/2025

Some intake and exhaust tubing work we did on a good friend's SBC twin turbo race car. Can't wait to see this one rip!

Here is the 69 Mustang! We completely re-bodied it. The only original panel is the roof. The engine is a 408W with Hol...
08/12/2025

Here is the 69 Mustang! We completely re-bodied it. The only original panel is the roof. The engine is a 408W with Holley EFI and the suspension is full coil over from Street Or Track. We are really proud of this build and so happy to have such great customers who allow us to help them bring these beauties back to life!

Two beautiful cars we had the pleasure of working on this summer. Buick Roadmaster and Corvette. We have factory assem...
09/04/2024

Two beautiful cars we had the pleasure of working on this summer. Buick Roadmaster and Corvette. We have factory assembly manuals and repair manuals and any stock vehicles we work on get returned to stock settings. Modified cars like the Roadmaster get set to best performing specs set with modern tools and equipment such as air fuel gauges. Our goal is to always return the vehicle exceeding your expectation of drivabilty and quality! Our winter and early spring schedule is almost full so give us a call to discuss any projects you may have for that time period.

74 Camaro Drag Car Build. We installed a crate 496 BBC, did full Holley Terminator fuel injection and Ignition control....
08/28/2024

74 Camaro Drag Car Build. We installed a crate 496 BBC, did full Holley Terminator fuel injection and Ignition control. Wired up the rest of the car for track and limited street use, built a full four link and narrowed 9" rearend and minitubbed it. We also completley re-plumbed the car and added a vacuum pump for more reliable street braking, along with fabbing alot of fluid coolers to stay happy on the streets. I'll post more pictures soon!

65 GTO We finished up awhile back. This Car came to us in boxes and we got it all put back together and drivable. Beau...
08/27/2024

65 GTO We finished up awhile back. This Car came to us in boxes and we got it all put back together and drivable. Beautiful car and a great customer to work with. Looking forward to ironing out the last few small things over winter so he can enjoy this car all of next season without any worries.

1969 Mustang We did a full re-body on over this spring. It's currently getting fully gapped and primed. This week shou...
08/26/2024

1969 Mustang We did a full re-body on over this spring. It's currently getting fully gapped and primed. This week should start any minimal filler work. We added 2" to the rear inner fenders to mini tub it for when we go to a larger rear tire in the future.

Address

870 Hartlot Street
Elbridge, NY
13060

Opening Hours

Monday 10am - 9pm
Tuesday 10am - 9pm
Wednesday 10am - 7pm
Saturday 10am - 8pm
Sunday 11am - 7pm

Website

Alerts

Be the first to know and let us send you an email when Mike's Performance Engineering - MPE posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mike's Performance Engineering - MPE:

Shortcuts

Share

Category