Emloh Electric

02/17/2026

Now a Licensed Master Electrician in the Great State of Iowa.

02/03/2026

We had some time to kill on a job so we played around with our new Fluke iSee thermal imager. It didn't take long to see problem spots that we couldn't.

We found a 20a breaker running at 19.2a [should be 16a (80%) or less for continuous duty (3hrs or more)].

We also found a 3 ph breaker that is running one leg hotter than the other 2 legs while pulling the same amperage.

Thermal imagers are a huge help when trying to predict problems before they happen rather than react to them after they happen.

01/27/2026

The previous electrician said their system was getting full. Rather than guessing we can know for sure using our Fluke 1734 logger. The logger measures a number of aspects (amperage, voltage, power factor, ect) of an electrical system over time.

For this project we are looking at the system for a two week period to know the impact of multiple UPSs (power factor) and system utilization (power available versus used).

With the information we gather, we can make informed decisions on facility upgrades and building power distribution, rather than poorly informed guesses.

10/10/2025

Now Licensed In the Great State of Wisconsin!!!

08/25/2025

Take a look at a recent project now in our portfolio lighting up the area.

New Billboard Lights up the Sky: When time is literally money, we worked extra hours to electrify a 2-sided digital billboard. Working from ground level and heights, we aimed to for a clean and expedient installation that could weather both time and the elements.

08/18/2025

July was a busy month. Take a look at a massive service upgrade we completed at a near by stamping plant.

600a Service Upgrade: From 200a to 600a service, a stamping plant gets the power it needs to move forward

08/14/2025

You want the Electrician that worries about the small details.

In this picture we are running conduit to a 45 ton press. Notice how the conduit runs along the angled edge of the building steel. The cross over at the top is level with the floor and orthogonal to the left side of the beam...And to top it all of bottom has a box offset so the junction box isn't at an angle.

This may be trivial to an outside observer, but if we are stressing this level of detail then you know we are also making sure it is safe and reliable!

And also, its a damn sexy run of conduit!

06/30/2025

A big thank you to Mars Electric of Westlake for these amazing Guardians tickets! We won them during the grand reopening of their store. They have the best stock and prices of electrical supplies and Jake is the best manager to work with.

The whole family went and had an absolute blast! We were also already showing the next generation how to spot good conduit runs at baseball fields.

06/20/2025

Live power on the ground is often the result of strong storms and needs fixed promptly. We got you covered for all your electrical emergencies, even after hours.

Please don't hesitate to call or text us!

06/19/2025

There's a severe weather and tornado warning so stay safe out there! If you should need after hours emergency electrical help, feel free to give us a call.

06/18/2025

Always trying to upgrade our kit. Gone are the days of driving ground rods by hand.

With the Bosch Brute we can send ground rods to China with ease!

We can also use the brute to chip away overpour on concrete slabs for a clean conduit installation. We looked at, and tested, smaller demolition hammers. In the end the Brute offered the best bang for the buck, and we went with what we know an love.

Now we need to keep it clean.