West Coast Pavers, Inc.

10/20/2026

Blot wet paint on pavers instead of using a hose or rag, which can spread the splatter. Start gently, and test any remover first, especially on colored concrete, natural stone, or sealed patios.

https://wcpavers.com/remove-paint-from-pavers/

10/19/2026

A pressure washer is not the first step for gum on pavers.

Freeze the spot with bagged ice, then lift the gum with a plastic scraper. Wash away residue gently. This approach limits exposure to chemicals and high pressure while helping protect the surface and joints.

https://wcpavers.com/remove-gum-from-pavers/

10/17/2026

After a Florida storm, wait until the patio is safe to enter, then inspect before cleanup hides signs of damage. Check for uneven pavers, washed-out joints, loose borders, and changes in drainage. Pavers can look intact even when heavy rain has exposed a problem with the support beneath them.

10/15/2026

Harder scrubbing will not lift most leaf stains on pavers.

Wet leaves can leave brown marks below the surface. Start with a gentle wash and a cleaner compatible with the paver and any sealer. Check the surface once it is dry before trying anything stronger.

See the full method.

10/13/2026

An oil spill on brick pavers needs attention before it soaks farther into the surface.

Start by using an absorbent to lift fresh oil, then clean gently. Results depend on the stain's age and paver material, so identify the material before choosing a cleaner. Older stains may need repeated treatment, and some discoloration can remain.

See the full step-by-step guide.

10/12/2026

Heavy rain can wash sand out of brick paver joints before the surface looks damaged.

In Southwest Florida, check the joints after storms, even if the pavers still look fine. See the year-round maintenance schedule.

https://wcpavers.com/brick-paver-maintenance-2/

10/10/2026

Sunken pavers may look like a brick problem, but the trouble often sits underneath.

If the same spot settles again after leveling, another reset may not hold. Check what has moved and where storm water goes before deciding whether to reset a few pavers or rebuild the support.

10/10/2026

Green growth can make pavers slippery before they look heavily stained.

In Southwest Florida, humidity, shade, rain, and irrigation overspray can keep the surface damp and encourage regrowth. Start with a nylon-bristle brush and controlled rinsing, then check the joints and drainage.

https://wcpavers.com/algae-on-pavers/

10/09/2026

A paver project can stall before work starts if the HOA application leaves materials, intended use, property boundaries, or drainage unclear.

We recommend confirming written approval before ordering materials or scheduling work. HOA approval and any required government permits are separate approvals.

Use our HOA paver approval checklist to prepare clear plans, confirm separate permits, address drainage, and keep your Southwest Florida project on schedule.

10/08/2026

Check brick pavers and joint sand before cleaning. Start with mild soap and water, gentle scrubbing, and a controlled rinse. Stronger cleaners or higher pressure can create more maintenance work.

We show you how to clean brick pavers gently, protect joint sand, treat stains carefully, and spot issues that need professional attention.