Architectural 3D and CAD

Architectural 3D and CAD Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Architectural 3D and CAD, Architectural Designer, 2446A Coles Mill Road, Franklinville, NJ.

As-builts -Floor plans-Existing conditions
Custom Millwork and cabinet drafting and design
We install what we draw locally

We draw Locally and anywhere in the USA
Based in Franklinville, NJ 08322

This building was a Barn converted to a small workshop (Industrial space) and now drawn as a residential project.Picture...
05/17/2026

This building was a Barn converted to a small workshop (Industrial space) and now drawn as a residential project.

Pictures are low level design renderings.
Not fully rendered yet.
Keith Rhoda
(856) 373-3430

Start of another project. I drew these renderings as a start for some folks in Bernardsville, NJThis is the first render...
01/11/2026

Start of another project. I drew these renderings as a start for some folks in Bernardsville, NJ
This is the first render and floor plan out. It's rough till I get more feedback from the Designer I collaborated with and the
The 2D drawings are rough as this is only being used by myself in the design phase.

Our scope: Draw the Kitchen and Floor plan layout. Provide Cabinets and Millwork Install provided products.

Homeowners.
Dura Supreme Cabinetry

Gaggenau and Thermador appliances. Both of these companies offer a great product, but I hate to see appliances mixed.

We draw what we build, and we build what we draw if our clients are local to us.

We also draw for anyone in the USA. We are located in the United States (Franklinville, NJ)

Project I, drew, supplied cabinets for and installed in Marlton NJ.The room is a converted bedroom for a boy named Killi...
12/03/2025

Project I, drew, supplied cabinets for and installed in Marlton NJ.
The room is a converted bedroom for a boy named Killian who needs round the clock medical care.

His mother redid the room with some bright colors and amenities (Not shown as the room is not complete) as hid special place when he is home.

The cabinets provided a space for his clothes and shoes, The upper cabinets will hold his Disney plushies and the left-hand side pantry has a room for a special plushie named Ralph. I will be doing a post on that later when it is complete.

The cabinet sizing was more for function as opposed to appearance, but they did look really nice upon installation.
A custom "Rocket style shelf" is in the design works now and the drawings for that will be in a custom cabinet shop this week.

Cabinets - Dura Supreme Cabinetry (One of the lines I carry)
KTR Millwork and Home remodeling (Owned by us)
CAD work In House
Installation (Me, Keith Rhoda)

I posted some of my CAD work on this Barn dominium project awhile back, and I stated I would add some progress pictures....
05/09/2025

I posted some of my CAD work on this Barn dominium project awhile back, and I stated I would add some progress pictures.
My part of the work was to work with the timber framer to create a visualization for his client to review before committing to a design. The 3D renders were not meant to be photo quality and the colors and finishes were to be close. Just to get them into the ballpark.
I first created the beams in my Software (Chief architect X16) which utilizes DWG and DXF file formats (File formats mean nothing to the post, just makes me sound like some sort of CAD guru or something like that) and then we went to roof configurations. From there after several revisions and changes, we got to windows sizes, configurations as well as placements on all for walls. I have been done my part of the project for a couple months now, but it has now been just over a year since the timber framer and myself started working on this.
My software is not really geared towards timber framing, but I was able to make it work. This is not really a major feat as plenty of others have done the same thing, but this was my first time doing so.
Side note: I have done none of the hands on work on this project. My specialty is fine finish carpentry and CAD for architectural design and Condocs.

My website for CAD
www.KTRCADservices.com

Timber framing by : Chris Zobel
Chris Zobel, LEED, AP

484-645-5969

[email protected]

Www.Chriszobelcarpentry.com

Basic floor plan drawn of one floor of a church built in the mid 1800's. Floor plan drawn shows how it looks today.Drawn...
03/09/2025

Basic floor plan drawn of one floor of a church built in the mid 1800's. Floor plan drawn shows how it looks today.

Drawn for the local BCE office to have on record.

Another project I drew for one of my Architects in northern PA.3D render shows a proposed addition to a house.I did not ...
02/22/2025

Another project I drew for one of my Architects in northern PA.
3D render shows a proposed addition to a house.
I did not do any design work on this. I just rendered what he designed. Picture at end was taken online of the actual house (Ariel shot)
Design credit goes to David Barger Architects.

Need Architectural drafting or renders? (856) 373-3430

Project that I am winding down on. I drew a concept drawing with 3D renders for a Timber framer in PA.I went and saw wha...
02/13/2025

Project that I am winding down on. I drew a concept drawing with 3D renders for a Timber framer in PA.
I went and saw what was left of a barn that was well over 200 years old (See pics) From there I took pictures, measured some of the existing beams and used some hand drawn plans that were prepared by the Timber framer.

We worked together on this via phone calls and Emails, and we brought it to this point.

I did all the computer work, and the framer is building the actual building.

CAD work (Me) Keith Rhoda
(856) 373-3430
www.KTRCADservices.com

Timber Framer: Chris Zobel
Www.Chriszobelcarpentry.co

We also install the Millwork projects we draw.Drawn and installed or just drawn for your own installer.Att: Builders and...
10/26/2024

We also install the Millwork projects we draw.
Drawn and installed or just drawn for your own installer.

Att: Builders and designers looking for Millwork layouts and design.
If you are a builder with heavy Millwork projects and want to show and sell comprehensive millwork details, I draw those.
***********************************
They are to scale, use local production run profiles and I can also draw custom profiles. These drawings are also detailed to be used as working shop drawings for your installers. And to my builder friends who know me, I have installed these projects for over 35 years and have been doing CAD for over 5.
***********************************
I am a 30 plus year Millwork carpenter and just over 5 yrs experience in CAD for any type of Millwork and kitchen project.
Kitchen layouts using Custom and Standard sizes
Floor layouts to full blown as-built of existing buildings. Call outs can include structural members and utilities as well.
3-D rendering of projects
Anything you need drawn architecturally
All millwork and cabinetry utilize materials available from places like Kuiken Bros, Garden state lumber and most major cabinet manufacturers. Custom cabinetry and Millwork can be drawn to spec.
I also install Millwork and cabinetry- Fine furniture quality installations of cabinets, built-in’s and interior or exterior millwork. (South Jersey and Jersey shore area)
I have hundreds of pictures to share to any potential client
I work for Architects, Designers, Builders, Homeowners and Investors.
I am NOT a lic architect.
Keith Rhoda
Blackwood, NJ
(856) 373-3430

*As-builts-Floor plans-Modified floor plans*We draw as-builts-Floor plans-Shop drawings-Anything you need for any buildi...
03/12/2024

*As-builts-Floor plans-Modified floor plans*

We draw as-builts-Floor plans-Shop drawings-Anything you need for any building.

From a simple existing floor plan to a complete schedule of all components of a building put on paper.

We draw on site.

We also do photo documentation of any building we survey.
(856) 373-3430
WWW.KTRCADservices.com

Sometimes the jobs are quick and easy. This is a dance studio that just needed a basic floor plan drawn up. Just dimensi...
02/10/2024

Sometimes the jobs are quick and easy. This is a dance studio that just needed a basic floor plan drawn up. Just dimensions and floor plan with some labeling.
Call 856-373-3430 for your floor plan or as-built.

Address

2446A Coles Mill Road
Franklinville, NJ
08322

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 9pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 4pm
Saturday 7am - 5pm

Telephone

+18563733430

Website

Alerts

Be the first to know and let us send you an email when Architectural 3D and CAD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Architectural 3D and CAD:

Shortcuts

Share

Category