Alpenglow Electric

08/31/2026

Time for a safety post everyone!
I was called out to take a look at a receptacle that burnt up for a client of mine. Upon diagnosing, I noticed a couple things that raised my suspicions.

You know those cheaply made LED plug in signs that look like a Neon sign. Those usually are not listed. Meaning the manufacturer did not spend the money to have their product tested and certified by UL, ETL, or CSA. These are nationally accredited testing laboratories that certify and approve eligible products. Oftentimes, the manufacturer will claim the product was certified with a UL Listed or recognized power supply, but the product can be physically plugged into any USB port it will physically fit into. RED FLAG.

This fixture called for a 5 Volt 2 Amp power supply. The power adapter that was used was a 5 Volt 1 Amp power supply. Doesn't sound like much, but this fixture is drawing double the amount of amperage (rate of electrical flow) that the power adapter is rated for. This is a problem because it will generate heat. A quality power adapter should shut off when it overheats but repeatingly ignoring this sign can lead to further damage, a poor quality/knock off power adapter could lack this feature for all I know. After they cool back down, they will typically work again.

This receptacle also was worn and likely due for replacement pre-failure. Worn receptacles that no longer have a tight connection can make a small issue, into a big one.

I have a few big takeways from this

- Be careful when choosing your light
fixtures, look for UL, ETL, or CSA stamps/stickers

- Do not purchase light fixtures from websites like Amazon or Temu

- Make sure you are using quality USB power adapters for your gadgets

- Regularly test your smoke detectors and have them replaced if they're older than 10 years. If you don't have smoke detectors there's always options to add them!

- Consider having Alpenglow Electric do a thorough safety inspection of your property. Not all safety issues are as dramatic or obvious as a burnt receptacle. It can take a long time for signs to visibly appear!

08/12/2026

08/12/2026

Wafer lights might be the easiest option, but often times not the correct option. Sloped ceilings should have adjustable gimbal recessed trims or sloped trims. Not to mention wafers have glare and defeat the purpose of actual recessed lighting. Make sure your electrician understands lighting!

08/11/2026

We love your punchlists! A good way to save money with your electrician is to make a list of what you need done, and have it taken care of with one estimate. This was apart of a punchlist in a 1980s home. I'll be installing the switch for the radon fan once it's ready.

08/02/2026

🔥 Another Happy Customer! ❄️

Another successful HVAC installation completed by the team at Denary Plumbing, Heating & Cooling!

✅ Brand-new furnace
✅ New central air conditioning system
✅ Professionally installed for years of reliable comfort

We’d also like to give a big shout-out to Matt Hebert with Alpenglow Electric for their excellent electrical work on this project. It’s always a pleasure working alongside quality professionals!

Whether you’re replacing an aging system or planning an upgrade before the next heating or cooling season, we’d be happy to help you find the right solution for your home.

📞 603-661-2300
🌐 www.denaryplumbing.com

Serving homeowners throughout Southern New Hampshire & Northern Massachusetts.

Thank you to another customer for trusting Denary with your home’s comfort! We truly appreciate your business.

08/02/2026

Exterior wall lights need a flat mounting service. This job we planned to cut in our own siding blocks, flash them in, and install the new wiring. These were old worked, meaning we installed them in finished walls within a home. No damage to sheetrock or inside finishes. Typically a carpenter or siding contractor is needed for these type of installs, but here at Alpenglow we like to do it all to ensure a smooth project.