Structura View

10/27/2026

It hadn’t rained all day and the roof was still leaking.

Five leaks in a medical building, no clear source, and two of the leaks were dripping with no rain at all. The roofing contractor had to price the repair and couldn’t afford to guess.

Quote it wrong, and everybody loses. A patch that doesn’t hold means a callback. A large scope without evidence looks like an upsell. And the owner pays for both.

So before quoting, the contractor brought in Structura View for a leak investigation.

The investigation found several possible entry points:

- Failing scupper sealant

- Loose parapet flashing

- Separating atrium flashing

- Unsealed curb fasteners

- Small membrane punctures

Leaks with no rain point to water trapped inside the roof. A quick patch won’t reach it.

The recommendation was to test before repairing: controlled water testing, test cuts in the wet areas, and an HVAC check. Clear deficiencies get fixed either way. The rest of the scope waits for the evidence.

For owners, a contractor who recommends testing first isn’t stalling. They’re protecting your budget and your building.

https://structuraview.com/it-hadnt-rained-all-day-the-roof-was-still-leaking/

Pricing a hidden leak? Guess too small and get a callback; quote a large scope without proof and look like an upsell. Here is how we solve this problem.

10/16/2026

A Florida church needed a new roof. The old tiles were worn out, and replacement was the clear answer.

Then came the question nobody wanted: what if those tiles contain asbestos?

Asbestos can't be identified by looking at it, and the risk comes from disturbing it. A quick repair, a pressure wash, or a crew walking the roof for a quote can make the problem worse.

How to move forward, step by step:

1. Stop all work on the roof. Hold off on repairs, cleaning, pressure washing, and unnecessary foot traffic until you know what the material is.

2. Get a professional assessment. A building envelope consultant can document the roof's condition and determine what needs to be replaced, repaired, or tested. At this church, that meant reviewing seven steep-slope and three low-slope roof areas, each with different needs.

3. Have the tiles sampled and tested. A qualified asbestos professional should collect representative samples, and an accredited laboratory should analyze them, before the tiles are disturbed and before any repair or replacement work is planned.

4. If the results are positive, plan the removal carefully. Removing asbestos-containing material is regulated. Work with qualified asbestos professionals to determine what's required for your building and how the removal fits into the replacement.

5. Price the replacement once you know what you're dealing with. Quotes built on guesses can change, sometimes dramatically, once the test results come in.

6. Have the work observed. Independent observation during removal and installation helps make sure the plan is followed and the new roof is installed correctly.

These roofs are uncommon today, but they're still out there on churches, schools, and older buildings across Florida.

Article link: https://structuraview.com/asbestos-in-your-old-roof-heres-how-to-move-forward-without-making-it-worse/

hashtag hashtag hashtag hashtag hashtag hashtag

Think your old roof has asbestos shingles or tiles? Follow these 6 steps to test, plan, and replace it safely without making the problem worse.

10/15/2026

Asbestos roof tiles can’t be identified by looking at them, and the risk comes from disturbing them. A quick repair, a pressure wash, or a crew walking the roof for a quote can make the problem worse.

This Florida church needed a new roof, but suspected asbestos tiles had to be addressed first.

If you’re facing the same situation, here’s how to move forward:

1. Stop all work on the roof. Hold off on repairs, cleaning, pressure washing, and unnecessary foot traffic until you know what the material is.

2. Get a professional assessment. A building envelope consultant can document the roof's condition and determine what needs to be replaced, repaired, or tested. At this church, that meant reviewing seven steep-slope and three low-slope roof areas, each with different needs.

3. Have the tiles sampled and tested. A qualified asbestos professional should collect representative samples, and an accredited laboratory should analyze them, before the tiles are disturbed and before any repair or replacement work is planned.

4. If the results are positive, plan the removal carefully. Removing asbestos-containing material is regulated. Work with qualified asbestos professionals to determine what's required for your building and how the removal fits into the replacement.

5. Price the replacement once you know what you're dealing with. Quotes built on guesses can change, sometimes dramatically, once the test results come in.

6. Have the work observed. Independent observation during removal and installation helps make sure the plan is followed and the new roof is installed correctly.

These roofs are uncommon today, but they're still out there on churches, schools, and older buildings across Florida.

See first comment for link to the full article.

10/13/2026

The Mistakes on Your Job Site Today Will Be Buried by Next Week – Is Anyone Watching? 🏗️

Missing fasteners. Open holes in the roof deck. Unfinished flashing left open to the weather. On every construction project, small mistakes happen, and most of them get covered up before anyone notices.

Once the next layer goes on, those problems are out of sight until they show up again as leaks, warranty disputes, or costly repairs after the building opens.

That's why regular inspections and progress documentation matter on every project, big or small. Catch it before it's covered.

Read the full story 👇
https://structuraview.com/the-mistakes-on-your-job-site-today-will-be-buried-by-next-week-is-anyone-watching/

Some people view quality assurance as an added expense to a project...

10/09/2026

A cost-saving roof-over is a smart choice for school districts and commercial property owners on a budget—keeping projects on schedule and minimizing disruption. But in Florida, keeping costs down can't come at the expense of storm readiness.

When a recent school project installed an adhered modified bitumen system over an existing gypsum deck, the big question was whether the bond could handle hurricane-force wind uplift.

We stepped in to perform independent bonded adhesion pull testing across 16 locations. The results? 15 out of 16 locations passed the requirements, handling 1,500 to 1,800 lbf without bond failure—doubling the required minimums and confirming a massive safety margin before the assembly was covered up for good. Cost savings don't have to mean sacrificing structural integrity.

Professional commercial roof inspection, precise moisture mapping, and advanced non-destructive testing for building owners and property managers.

10/09/2026

The Windows Tested Dry, the Stucco Tested Dry – the Leak Was Coming From Underground.

Every major storm, the same leak appeared inside a Lakeland, FL building. Between storms, everything looked dry. Without knowing the source, any repair would be a guess.

We tested the façade, stucco, windows, and above-grade penetrations. None of them leaked.

So we followed the water. Heavy surface runoff, erosion, and no gutters pointed below grade. Excavation at the foundation revealed:

- Open CMU (concrete masonry unit) cells
- Deteriorated grout joints
- Pathways letting water collect and migrate through the wall

During heavy rain, water was trapped against the foundation until it pushed through to the interior.

The fix: waterproof the wall from about 10 inches above grade down to the footing, and restore proper drainage to move water away from the building. Not every leak starts where it appears.

Read the full story: https://structuraview.com/the-windows-tested-dry-the-stucco-tested-dry-the-leak-was-coming-from-underground/

10/05/2026

We love helping school districts and commercial property owners save money without cutting corners. Here's how Structura View helped a local school system get a cost-effective roof-over while verifying true hurricane readiness.

When the project installed an adhered modified bitumen system over an existing gypsum deck, the big question was whether the bond could handle hurricane-force wind uplift. We stepped in to perform independent bonded adhesion pull testing across 16 locations.

The results? 15 out of 16 locations passed the requirements, handling 1,500 to 1,800 lbf without bond failure—doubling the required minimums and confirming a massive safety margin before the assembly was covered up for good. Cost savings don't have to mean sacrificing structural integrity.

Read the full case study breakdown:

Professional commercial roof inspection, precise moisture mapping, and advanced non-destructive testing for building owners and property managers.

09/29/2026

We always tell clients that guessing on a roof decision gets expensive, but finding out what's under the membrane doesn't have to. Here's a recent example.

A Roof Decision Was Looming – and the Clock Was Ticking. Repair, recover, or replace? On the surface, the roof looked serviceable. But without knowing what was under the membrane, any decision was a guess.

Our moisture survey of 8,726 sq ft found:
- 14 wet areas (roughly 10% of the roof)
- Punctures and unsealed penetrations, mostly left behind by other trades
- Failed repairs sitting right on top of the moisture

Fortunately, these defects were caught early. The insulation was still salvageable, allowing timely repairs and keeping the option to recover the roof instead of replacing it.

Planning roof work or bringing in new trades? Let's talk before the damage spreads. https://structuraview.com/contact/

, , , , ,

07/02/2026

Choosing the right roofing system starts with understanding the building.

At Structura View, we don't recommend the same solution for every project. We evaluate the building's use, long-term ownership goals, existing roof assembly, and environmental conditions before making a recommendation.

By matching the roofing system to the building's specific needs, clients gain a solution that delivers better performance, longer service life, and greater long-term value.

06/25/2026

A roof doesn't have to be leaking to be failing.

One of the biggest mistakes property owners make is assuming that if they don't see a problem, there isn't one. In reality, sun exposure, weather, and normal aging are constantly impacting your roof system. Small issues like seam failures, punctures, and deteriorating materials can quietly develop into major expenses if left unchecked.

A proactive roof management program helps identify and address these issues early, extending the life of the roof and reducing long-term costs. Instead of reacting to leaks and unexpected failures, property owners gain a clear understanding of their roof's condition, future budget needs, and the steps required to maximize its service life.