Industrial Dynamic Services LLC

08/28/2026

Finished up another reversing bucket coupler and used one to set the hanger ears on a Kx040 ripper. If you need a way to spin the bucket around on the 3 to 4 ton Kubota mini excavators this is it. Uses the correct geometry to get the most from the machine.

08/26/2026

Replacable rear cutting teeth

Here is a video to show the cutting ability of the replacable cutting tips, rippers dont have to be for just pulling, and you can only pull so much with the smaller machines. Now you can cut the roots up closer to the stump saving time and less of a mess with cutting teeth on the backside.

A little testing with the Razor Back replacable rear teeth to demonstrate how it cuts. We were getting some footage for a video had a drone going too when I took down a stump but anyways here is a little clip just showing how it cuts, its very mean.

08/23/2026

Welding up some rippers today, prepping them for the mounting ears.

08/23/2026

These ears pulled pretty good in welding even with the braces I had on them. 9 inchs is where they need to be. A little straighting action video.

08/22/2026

Shipped this Razor Back ripper and rake out yesterday, they are headed down to Texas. Made here in Ohio using only the best Ar400f hardened steel for ultimate durability.
Call or message if interested 330-831-3013 Gary

08/19/2026

08/19/2026

This 1/16th metal cored diamond spark welding wire laying down in here good. Burning in deep ready for some abuse.

08/19/2026

60inch rake getting cleaned and prepped for paint today, another kx080 ripper finished up also. A picture showing jig for mounting the hanger ears. Also the adapter mount that we converted to 90 mm pins from a different size for a full size excavator hammer.

08/17/2026

Its been a busy weekend out here in the shop. Making progress on these attachments.

08/14/2026

This was a deceiving red oak stump, old and rotted. Peeled off a good 12 inch's all the way around but the center and all the roots were solid.