Ken's Custom Designs

01/31/2025

01/31/2025

Updates from Ken’s Custom Designs! 📣 Our new contact number is 918-707-1828.
While I’m stepping away from staining concrete floors and overlays. I’ve decided not to retire and still here for concrete coatings and recolor/ reseals as the weather allows.
You can still count on us for small remodels, epoxy countertops, Faux finishes, accent walls, Drywall repairs and now, handyman services and more.
Thanks for your continued support! - Ken

03/30/2024

Kitchen remodel in McAlester.. we moved a wall and installed a decorative support beam, moved some cabinets around to make a center island, made new concrete/ epoxy countertops and painted all cabinets…whew lol

02/15/2024

02/06/2024

Custom insert in a bay window. Made with 1 1/2” of mdf, two coats concrete overlay (approximately 5000 psi at 16” thickness) colored with acid stain and finally coated with clear epoxy resin for the finish.
We also offer other types sealers and finishes from matte to glossy or Uv stable scratch resistant etc…none of these products are sold in Your local Home improvement Store.!
Call 539-237-0022 to arrange an estimate on concrete/ epoxy Countertops, interior remodels and more!
Sadly, Due to the high number of inquiries we get through emails ,messengers and marketplace , many messages can go unseen. If You are serious about an estimate then You should CALL or TXT ..Thanks!

02/06/2024

Before,During and after shots of a 1100 sq of grind, overlay, stain and seal in dorm We did at East Central University Of Oklahoma “ECU” in Wilburton Oklahoma on the top floor hallway..That was a long hallway with many doorways!
Start to finish on all this was about 10 days as each step must be cleaned thoroughly, done twice and must have 24 hours drying/ curing between steps…
Can You do a floor in 3 days..short answer is Yes but….it won’t look, feel or last like a “Ken’s Custom Designs “ floor!

02/06/2024

Here’s a couple before shots and several shots finished of Recent remodel job finished Jan 2014 in Wilburton.
It’s a mobile home with paneling so we first removed some trim around the ceilings, then scuffed and cleaned walls,skimmed walls ,sanded and shot a nice knockdown texture in two bedrooms.
Then 2 coats primer and two coats paint on all walls and ceilings .
In addition to those items we removed 1/2 the vinyl flooring in one of the two bedrooms carefully,cut out subfloor , reframe & replace it.
Next, we put all the old flooring back in place with out breaking it
We also primed and painted existing trim around doors and windows and even made some custom trim pieces for the customer with some leftover supplies on hand.🔨
Finally, true Ken’s Custom Designs style and expectations…we modified the two sets of closet doors and built in drawers(which were mostly particle board with veneer) and used faux finishing techniques and water based paints,glazes and gel stains to give a more high end look…
We could have just painted them but, it just wouldn’t be the Ken’s Custom Designs way!!! 👌👍
And on the final day we swept, mopped and put 2 coats of floor wax down on Our way out..call 539-237-0022 for estimates!

01/13/2024

Check out my latest project! A clost door re-vamp project using 1/8 x6 “ plywood strips, some waterbased productsband some faux wood grain techniques