Enviro-Tech Coatings

06/03/2026

There are many things that affect your business’s profits, and equipment costs are often one of the largest. Keeping your equipment in good condition helps with both efficiency and safety. Rather than buying new machines, you can save money by reconditioning or refurbishing the ones you already have. Reconditioned equipment often works just as well as new, but costs much less. The biggest advantage is saving money, since reconditioning can sometimes cost only half as much as buying new. Other benefits include:

• No investment of time or money in training operators on new machines
• Fewer risks than buying used equipment
• Operates approximately the same as a new machine
• Improved appearance and safety

READ MORE AT: https://enviro-tech-coatings.com/2026/06/03/reconditioning-reduces-costs/

05/22/2026

05/05/2026

New challenges have encouraged what many now call a “circular mindset.” With today’s economic and environmental pressures, this approach matters more than ever. The circular mindset is about cutting waste and pollution by keeping products and materials in use for as long as possible. When equipment or products reach the end of their life, they are often remanufactured to a “like-new” condition. This is also called rebuilding, refurbishing, reconditioning, or renovating.

If you see the UL Mark on new equipment, it means the product met all national safety standards when it left the factory. This mark shows it is ready for sale or installation under the rules. For reconditioned or rebuilt products, though, the UL Mark by itself does not guarantee they meet safety requirements unless extra checks are done.

READ MORE AT: https://enviro-tech-coatings.com/2026/05/05/recondition-equipment-to-meet-safety-regulations/

04/28/2026

ETC offers painting capabilities including epoxy and fusion bonded epoxies, urethane, zinc, specialty coatings and linings, and rustproofing. We supply OEMs with a wide range of finished parts and equipment such as pipe and fittings, casting, tanks, metal parts, and metal fabrications.

Learn more at: https://enviro-tech-coatings.com/

04/01/2026

Blast media is a range of materials shot at high speed with compressed air or water to clean, remove paint, or polish surfaces. It plays a key role in preparing surfaces in industries such as automotive and aerospace. Choosing the right blast media depends on the material’s hardness, shape, and the finish you want. Using the correct blast media is important to get the results you need.

Abrasive Types
Use hard abrasives when you need to remove material quickly or create small indentations to help hard surfaces hold protective coatings better. Soft abrasives work well for cleaning dirt and grime from surfaces such as wood, plastic, and other delicate materials without causing significant damage. High-friability abrasives break apart easily into smaller pieces and can be collected and reused. The shape of the abrasive also affects how it works and the final result. Angular abrasives make a rougher, more detailed surface, while round abrasives leave a smoother, satin-like finish.

READ MORE AT: https://enviro-tech-coatings.com/2026/04/01/blast-media-basics/

03/12/2026

Metal finishing makes metal parts stronger, more attractive, and more functional by altering their surface layers. There are several ways to finish metal, and picking the right method is important for getting the results you want. Professional metal finishers can help you choose, but here are some common techniques and their purposes:

Preparing the Surface for Finishing
• Deburring removes sharp edges and rough spots, making parts safer to handle and easier to assemble.

Read more at: https://enviro-tech-coatings.com/2026/03/12/the-purposes-of-different-metal-finishing-processes/

02/05/2026

Finding a coating provider for your equipment is critical to ensure the coating, painting, or metal finishing provides the expected results. When qualifying coating companies during the review process, consider the following factors.
Experience

A coating supplier that has been in business for years doesn’t always mean a satisfying outcome. During the review, ask about the solutions they have provided to other customers and whether they regularly meet specifications and completion dates. Discuss past projects to confirm that the supplier has performed coating projects similar to yours.

Read more at: https://enviro-tech-coatings.com/2026/02/05/how-to-find-a-qualified-coating-provider/

01/09/2026

To achieve optimum results in an equipment painting or reconditioning project, it’s critical that you know which “cleaning” process to use. In this blog, we will look at two of the most common methods to prepare machinery for a fresh coating: sandblasting and bead blasting. While both strip paint and other materials off the surface of equipment, there are differences between the two processes:

Read more at: https://enviro-tech-coatings.com/2026/01/09/when-to-use-bead-blasting-or-sandblasting/