Ameriscan GPR

05/15/2026

Another great view on the job!

05/05/2026

Not your average job site… grid scanning in front of legends 🎤🔍 Some days the backdrop hits just as hard as the work.

04/24/2026

03/23/2026

What’s below the surface matters. 🔍
These photos highlight our mark-outs and findings, including electrical, wire mesh, anomalies, and depth readings. All critical information for safer, more informed cutting and coring.

03/09/2026

On this job we used the RD7000 Radiodetection wand to locate electrical readings and the Conquest GPR system to run grid scans that mapped out rebar and wire mesh. The result? Clear data, safer drilling, and no surprises below the slab.

01/22/2026

The purpose of this survey was to scan an area to confirm that the concrete slab is thicker than 12”. In order to do so we performed line scans throughout the area using the Conquest Concrete Imaging System. The Conquest GPR unit specializes in evaluating concrete structures and detecting
embedded metallic/non-metallic objects.

01/05/2026

Take a look at what was hiding below the surface on this project — multiple electrical lines and unknown anomalies detected before any work began. GPR provides peace of mind and prevents surprises you really don’t want to find the hard way.

12/12/2025

Our GPR scan on this site uncovered more than expected…several live electrical lines, rebar and some mystery anomalies were found! Without scanning first, this could’ve turned into a dangerous(and expensive) situation. Always scan before you core, cut, or dig!

11/21/2025

The purpose of this survey was to map rebar patterns and locate any in-slab electrical
conduits or other obstructions that may interfere with proposed slab
penetrations. Here’s what we found…