M Series Rebuild LLC

05/24/2026

Hey folks, this is a rather hard post as it saddens me to write. Looks like the time has come that we will no longer be able to offer some of our kits for DIY installation. These will include M37 and Power Wagon power steering kits, M37 and Power Wagon dual circuit brake booster kits, and M37 and Power Wagon electric windshield wiper kits. In order to build these kits, we have to pull people from in process rebuild and restoration projects to build and put these kits together. Producing kits has simply become unprofitable for the Company because of the way we have to do it. We will be continuing to fill the current orders that we have promised to buyers, but will not be accepting new orders for kits mentioned above going forward. We WILL CONTINUE to offer our 2 & 4 wheel disc brake kits and our custom front wheel lock-out hubs for these trucks as these are produced in a different setting which have no effect on the restoration side of the business. Our component rebuilding services, (to include engines, transmissions, t/cases, and differentials, etc) are not affected and will remain the same. We would like to express our appreciation to all the businesses and individuals who have purchased kits from us over many years, we sincerely thank you. In the event our situation here changes in the future so that we are able to offer DIY kits again, we will post appropriate information here.

05/23/2026

Shots from this week. We hope everyone enjoys the Memorial Day weekend.

04/27/2026

Couple shots from around the shop recently.

03/20/2026

With the cost of high quality waterproof spark plugs on the rise, we have had several request to build some spark plug cables that are for use with the waterproof 24-volt distributor while using conventional civilian type spark plugs such as Champion J8C or equivalent. The set pictured here are a custom fit for the Jeep M715 and variants. We also have these available for the Dodge M37. We have installed these on trucks we have serviced in our shop as well as selling a number of sets to individuals. All feedback has been positive. The cost varies based on materials and labor time required to build to custom specs. Please call or email us for detailed pricing.

02/13/2026

The Ford F700/American LaFrance fire truck is headed to its permanent home at the The Norwood Museum.

02/03/2026

1957 Ford F700 Big Job w/ American LaFrance designed body. After a little under 2 years and many, many hours later, we're nearly at the finish line on this one. We weren't able to do our normal high detail, nut and bolt restoration style on this one due to budget restrictions. But overall we think it turned out pretty well.

12/11/2025

*SOLD*
5, 9.00-16 Speedways NDT 12 ply tires for sale. These were on a flat fender Power Wagon fire truck. Because of this they have very low miles and have always been kept inside, preventing wear and UV damage. Three of the tires have a date code of 2316. The other two have a date code of 2016 and 2616. Asking 375.00 + shipping for all 5. Tubes and flaps not included but can be added at additional charge.

09/05/2025

The Patina Power Wagon project is complete! All mechanical components rebuilt, Cummins 4BT, 5 speed OD trans, ARB air lockers in front and rear, transfer case cooling system, power steering, dual reservoir power disc brakes and loads of other upgrades. The owner wanted to retain the original look and paint of the vehicle (dents, rust, and all). So this one was finished in 4 coats of a specialized matte clear coat to preserve the look he was after.

08/28/2025

New run of lock out hubs in stock. Available in anodized black or clear. All color fill done at time of ordering.

$1,795.00 + shipping

07/28/2025

We have a custom built exhaust system for an M37. Complete with hangers, band clamps, gasket, etc. It is made from 2.5" ID tubing. Especially designed for a truck that is run on highway for longer distances. The 2.5" tubing allows for much easier exhaust flow and greater volume which gets heat away from the engine much faster in prolonged run situations. Not included in this kit is the heat shield that keeps heat away from the passenger side cab floor, however we can add this shield easily if you want that.

07/28/2025

We have a brand new unclaimed M37 Power Steering kit that is set up with a pump bracket that works with the 251 engine. If anyone has interest, please let us know. The system is already crated and ready to ship. This is compatible with a Canadian M37 or a US M37 that has been changed to the 251 engine. Thanks

Send a message to learn more